Soluciones Energéticas
www.solener.com solener@solener.com 4
- The display shows information about battery voltage, input and
output currents and powers, temperature, energy charged and
consumed, charging stage, alarms, peaks...
- Overload protection allows short current peaks (similar to a slow-
action fuse) for motor starting.
- Protection against voltage spikes in all inputs (TVS).
- Tropicalized electronic boards.
- Temperature compensated.
- Automatic load reconnection when the battery charges.
A short circuit in the output makes the controller disconnect
the output permanently. For manual reactivation you must press the
RESET button after removing the short.
The controller has a temperature probe in the bottom at the end of a
short wire. This probe must be left as is, hanging free.
DESCRIPTION
The SOLÉNER RSD charge controller has been designed
and built by SOLUCIONES ENERGÉTICAS, S.A. for photovoltaic
isolated systems using lead-acid batteries. It is reliable, versatile and
easy to use in solar home systems (SHS). It is compact and the
installation is straightforward.
The smart diode blocks current flow from the battery to the
modules at night, and has very low losses when the current flows from
modules to battery. It is not an usual diode, so do not make
assumptions about how it works.
