Solidscape 3Z Series Bedienungsanleitung

3z series

User Manual

Part Number 840180 Rev F

August 2013

Trademarks

Solidscape®, 3Z™PRO, 3Z™STUDIO, 3Z™MAX , 3Z™Touch, 3Z™Remote, 3Z™Print, 3Z™Works,

3Z™Analyzer, 3Z™Organizer, 3Z™Base, 3Z™Model, 3Z™Support are either trademarks or

registered trademarks of Solidscape®, Inc.

is a registered trademark of Solidscape®, Inc.

BIOACT®is a registered trademark of Petroferm, Inc.

Windows®is a registered trademark of Microsoft Corporation in the United States and/or other

Countries.

All other brand and product names appearing in this manual are trademarks or registered

trademarks of their respective holders.

Class A Digital Device

This equipment has been tested and found to comply with the limits for a class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at their own expense.

This Class A digital apparatus meets all requirements of the Canadian Interference-causing

Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le

matériel brouilleur du Canada.

Limited Warranty Statement

3Z Series

Solidscape, Inc. warrants this 3Z Series System to be in good working order for a period of one

year from the date of installation and registration. Should this Product exhibit any manufacturing

defects during the warranty period, Solidscape or its authorized agent will, at its option, replace,

repair or provide replacement parts for this Product at no additional charge except as set forth

below. Replacement parts and / or Product will be furnished on an exchange basis. All replaced

parts and Product become the property of Solidscape. The use of any parts or materials other

than those provided by Solidscape void this warranty. This limited warranty does not include

service to repair damage to the Product resulting from; accident, disaster, misuse, abuse, or

modification to the Product or installation by a person not authorized by Solidscape. This limited

warranty is activated only upon registering the Product with the manufacturer. Failure to register

this Product immediately upon installation will prevent activation of the warranty. This limited

warranty is transferable under the conditions of the Solidscape Warranty transfer policy.

Limited warranty service may be obtained by delivering the Product to an authorized Solidscape

warranty center. A dated proof of purchase from Solidscape or an authorized Solidscape dealer

must accompany the claim. The customer will ship the replacement parts and / or Product in the

original container or an equivalent. The customer is responsible for all shipping and insurance

charges. Failure to properly package, ship or insure the replacement parts and / or Product will

result in the customer assuming full responsibility for all damage or loss incurred in transit.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,

WHETHER WRITTEN, ORAL OR IMPLIED INCLUDING ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. SOLIDSCAPE SHALL

NOT BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING

FROM OUR PRODUCTS NOT BEING AS WARRANTED AND THE REMEDIES SHALL BE

LIMITED TO THOSE SET ABOVE.

IF THIS PRODUCT EXHIBITS MANUFACTURING DEFECTS DURING THE WARRANTY

PERIOD AS DESCRIBED ABOVE, YOUR SOLE REMEDY SHALL BE REPAIR OR

REPLACEMENT AS PROVIDED ABOVE. IN NO EVENT WILL SOLIDSCAPE BE LIABLE TO

YOU FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR OTHER

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE SUCH PRODUCT. THE REMEDY DESCRIBED ABOVE REMAINS THE SOLE REMEDY

EVEN IF SOLIDSCAPE OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANOTHER PARTY.

Table of Contents VII

Table of Contents

3ZTMSERIES ................................................................................................................................ III

LIMITED WARRANTY STATEMENT...........................................................................................V

3Z SERIES....................................................................................................................................V

TABLE OF CONTENTS .............................................................................................................VII

LIST OF FIGURES ......................................................................................................................IX

CAUTIONS ..................................................................................................................................XI

CHAPTER 1 - SYSTEM OVERVIEW ........................................................................................... 1

1.1 LED STATUS INDICATORS ................................................................................................ 2

1.2 TOUCH PANEL.................................................................................................................. 2

1.3 3Z ORGANIZER –3Z PRINT –3Z WORKS –3Z ANALYZER .................................................5

CHAPTER 2 – POWER ON PROCEDURE.................................................................................. 7

2.1 PRE POWER-ON PROCEDURE .......................................................................................... 7

2.2 POWER-ON PROCEDURE.................................................................................................. 7

CHAPTER 3 – NEW JOB STARTUP ......................................................................................... 11

3.1 3Z BASE SETUP ............................................................................................................. 11

3.1.1 Build Plate Mounting ........................................................................................12

3.1.2 Build Plate Barcode.......................................................................................... 13

3.2 CLEANING THE CUTTER..................................................................................................14

3.3 FILE TRANSFER AND REMOVAL........................................................................................ 15

3.3.1 File Transfer via Flash drive. ............................................................................ 15

3.3.2 File Transfer via Network. ................................................................................ 15

3.3.3 Removing a file................................................................................................. 16

3.4 STARTING THE PRINT JOB ..............................................................................................16

CHAPTER 4 – DURING JOB RUN ............................................................................................ 17

4.1 PAUSING THE JOB ..........................................................................................................17

CHAPTER 5 – JOB FINISH .......................................................................................................19

CHAPTER 6 – REPLACING CONSUMABLES ......................................................................... 21

6.1 PAPER TAPE ..................................................................................................................21

6.2 BUILD AND SUPPORT MATERIALS.................................................................................... 22

6.2.1 Adding Material ................................................................................................ 23

CHAPTER 7 – MAINTENANCE AND PRINTER STATUS ........................................................ 25

7.1 PRINTHEAD MAINTENANCE ............................................................................................. 25

7.1.1 Automated Printhead maintenance .................................................................. 27

7.1.2 Detailed Printhead maintenance ......................................................................27

VIII Table of Contents

7.2 CLEANING THE CAMERA LENS ........................................................................................29

7.3 CLEANING THE PURGE CAP REMOVAL STATION. .............................................................29

7.4 CLEANING THE MDS SENSOR AND PURGE CAPS.............................................................31

7.5 CLEANING THE PAPER TAPE FEED ASSEMBLY................................................................. 32

CHAPTER 8 – PRINTER SUBORDINATE SYSTEMS .............................................................. 33

8.1 IDLE /STATUS SCREENS OVERVIEW ...............................................................................33

8.2 SUBORDINATE SYSTEMS ................................................................................................ 34

8.2.1 Temperature information .................................................................................. 34

8.2.2 Printhead Maintenance ....................................................................................34

8.2.3 Tank Material.................................................................................................... 34

8.2.4 Table ................................................................................................................35

8.2.5 Job Information.................................................................................................36

8.2.6 Standby ............................................................................................................36

8.2.7 About ................................................................................................................ 37

8.2.8 MDS .................................................................................................................37

CHAPTER 9 – FUNCTION TEST ............................................................................................... 39

CHAPTER 10 – CONNECTING THE PRINTER TO YOUR PC .................................................41

10.1 INTERFACE OVERVIEW ................................................................................................... 41

10.2 WIRED CONNECTION VIA DHCP ..................................................................................... 41

10.3 WIRED CONNECTION VIA STATIC IP ADDRESS.................................................................42

10.4 WIRED CONNECTION PEER TO PEER .............................................................................. 42

10.5 WIRELESS VIA DHCP..................................................................................................... 43

10.6 ASSIGNING A STATIC IP ADDRESS TO A 3Z PRINTER ....................................................... 44

10.7 WINDOWS 7STATIC IP ADDRESS ASSIGNMENT...............................................................47

10.8 WINDOWS XP STATIC IP ADDRESS ASSIGNMENT ............................................................51

CHAPTER 11 – POST PROCESSING ....................................................................................... 55

11.1 POST PROCESSING ........................................................................................................55

11.1.1 Materials........................................................................................................... 55

11.1.2 Required Tools ................................................................................................. 55

11.1.3 References ....................................................................................................... 55

11.2 GENERAL SETUP............................................................................................................ 55

11.3 MODEL REMOVAL FROM 3Z BASE ................................................................................... 56

11.4 DEWAX –3Z SUPPORT MATERIAL REMOVAL ...................................................................57

11.5 POST PROCESSING TOOL KIT SUGGESTIONS ..................................................................58

11.6 MODEL EVALUATION ...................................................................................................... 58

APPENDIX A - PREVENTIVE MAINTENANCE SCHEDULE.................................................... 61

APPENDIX B - TECHNICAL SPECIFICATIONS ....................................................................... 62

APPENDIX C - VACUUMS......................................................................................................... 65

List of Figures IX

List of Figures

Figure 1-1 3Z Model Making System ........................................................................................... 1

Figure 1-2 LED Status Indicators.................................................................................................2

Figure 1-3 3Z TOUCH SCREEN AND REMOTE ................................................................................. 2

Figure 1-4 3Z Touch Panel ..........................................................................................................3

Figure 1-5 3Z Ready Status Indicator .......................................................................................... 3

Figure 2-1 Initialization screen .....................................................................................................8

Figure 2-2 Initialization screen with Camera issue ......................................................................9

Figure 3-1 Printer Idle Not Ready ..............................................................................................11

Figure 3-2 Build Plate ................................................................................................................12

Figure 3-3 Build Plate Mounting.................................................................................................13

Figure 3-4 Build Plate Barcode Keypad.....................................................................................13

Figure 3-5 Opening Cutter Shroud.............................................................................................14

Figure 3-6 Cleaning the Cutter Blade ........................................................................................14

Figure 3-7 USB Port Location ....................................................................................................15

Figure 4-1 Job Printing...............................................................................................................17

Figure 4-2 Job Paused...............................................................................................................18

Figure 4-3 Terminate Job...........................................................................................................18

Figure 5-1 Job Waiting for Finalize ............................................................................................19

Figure 5-2 Job Finalized ............................................................................................................19

Figure 6-1 Paper Tape Loading .................................................................................................21

Figure 6-2 Build and Support Materials .....................................................................................22

Figure 6-3 Adding Material.......................................................................................................... 23

Figure 6-4 Entering Barcode Manually ......................................................................................24

Figure 6-5 Barcode Missing .......................................................................................................24

Figure 7-1 Printhead Screens ....................................................................................................26

Figure 7-2 Printhead Ready / Not Ready....................................................................................27

Figure 7-3 Detailed Printhead Maintenance ............................................................................... 28

Figure 7-4 Stop Command.......................................................................................................... 28

Figure 7-5 Cleaning Camera Lens..............................................................................................30

Figure 7-6 Cleaning the Purge Cap Removal Station.................................................................30

Figure 7-7 Cleaning the MDS Sensor ......................................................................................... 31

Figure 7-8 Cleaning the Purge Cap ............................................................................................32

Figure 7-9 Cleaning the Paper Tape Feed Assembly.................................................................32

Figure 8-1 System Idle Screens..................................................................................................33

Figure 8-2 Temperature Information ...........................................................................................34

Figure 8-3 Tank Material Information..........................................................................................35

Figure 8-4 Table Position Information.........................................................................................35

Figure 8-5 Job Information..........................................................................................................36

Figure 8-6 About Printer Information...........................................................................................37

Figure 8-7 MDS Status Information ............................................................................................37

Figure 10-1 Wired connection via DHCP .................................................................................... 42

Figure 10-2 Wired connection Peer to Peer................................................................................ 43

Figure 10-3 Wireless MAC Address............................................................................................ 44

Figure 10-4 Wireless Ethernet Adapter.......................................................................................44

Figure 10-5 Stylus and Touch Screen .......................................................................................45

Figure 10-6 3Z Series Printer Control Panel..............................................................................46

Figure 10-7 DM9CE1 Icon .........................................................................................................46

List of Figures

Figure 10-8 Entering the IP Address..........................................................................................47

Figure 10-9 Starting Windows 7 Control Panel.......................................................................... 48

Figure 10-10 Windows 7 Control Panel ..................................................................................... 49

Figure 10-11 Windows 7 Network and Sharing Center..............................................................50

Figure 10-12 Windows 7 Network Connections.........................................................................50

Figure 10-13 Starting Windows XP Control Panel .....................................................................51

Figure 10-14 Windows XP Control Panel ..................................................................................52

Figure 10-15 Windows XP Network Connection Properties ...................................................... 53

Figure 11-1 Dewaxing System................................................................................................... 56

Figure 11-2 Heater Stirrer with build plate ................................................................................. 57

Cautions XI

Cautions

This manual includes several types of special operator notification; general CAUTIONS,

temperature related CAUTIONS, flammability related CAUTIONS and Notes. All CAUTIONS are

accompanied by an appropriate, internationally recognized symbol and all notifications are

enclosed in a bounding box to highlight their significance.

CAUTION! General cautions are further distinguished by the accompanying

international Caution symbol and are printed in bold face type.

Read the User’s Manual prior to installation or operation. Failure to

read and comply with safety instructions could result in bodily

injury or equipment damage.

CAUTION Heat related cautions are further distinguished by the

HOT! accompanying international Hot symbol and are printed in bold

face type.

Heat related cautions indicate that bodily injury could result from

failure to read and comply with the safety instructions.

CAUTION Flammability cautions are further distinguished by the

FLAMMABLE! accompanying international Flammable symbol and are

printed in bold face type.

Flammability related cautions indicate that a potential fire hazard

could result from failure to read and comply with the safety

instructions.

CAUTION Mechanical hazard cautions are further distinguished by the

MECHANICAL accompanying international Mechanical Hazard symbol and

HAZARD! are printed in bold face type.

Mechanical hazard cautions indicate that bodily injury could result

from failure to read and comply with the safety instructions.

Notes Notes provide additional information or reiterate information already

provided that may be helpful in avoiding non-critical mistakes that are

typically encountered if the associated directions are not followed.

In the event of any severe operational anomalies, power off the printer by pressing the

‘0’, side of the power switch on the left rear corner of the unit.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch