PS-5008 Kit 4K Home Distribution Hub
1
1. Introduction
1.1 Introduction to the PS-5008 KIT
PS-5008 KIT is a professional 4K HDBaseT Home Distribution Hub Kit, which consists
of a 4K HDBaseT Matrix Switcher, 3 HDBaseT Receivers and accessories.
The 4K HDBaseT Matrix Switcher is a professional 4x4 HDBaseT Matrix Switcher that
consist of the following inputs and outputs, 4 HDMI IN (4kx2K@60Hz signal at max), 3
IR IN, 1 IR EYE, 4 IR OUT, 3 HDBaseT OUT, 1 HDMI OUT, 1 SPDIF OUT, 1 L&R RCA
OUT, and TCP/IP, RS232 control port via phoenix connector.
The TPHD-BYE-R is an HDBaseT Receiver that consists of the following inputs and
outputs, 1 HDBaseT IN, 1 IR IN, 1 IR OUT and HDMI OUT. The receiver is powered
directly by the Matrix Switcher.
All HDMI inputs can be selected by either the front panel buttons, IR, RS 232 or GUI.
The selected source is delivered to HDBaseT zoned outputs 1~3 & HDMI Output.
The Matrix Switcher is capable of delivering 4K signals up to 40m, 1080p up to 70m
and powering the receivers via a single CAT5e cable. It is however recommended to
use good quality CAT6 cable.
The Matrix Switcher supports EDID management and is HDCP 2.2, 1.4 compliant.
Audio sources can be selected via RS232 commands and TCP/IP at the Matrix
Switcher or by 3rd Party control.
1.2 Features
•Support HDMI1.4 & HDCP2.2, and compliant with lower standards, capable to
transmit 4Kx2K@60Hz 4:2:0 & 1080p 3D.
•Support manual HDCP management and auto-detecting.
•Transmit 4Kx2K signal for 8m via HDMI port, 40m via HDBT port.
•Audio source selectable via RS232 command.
•3 HDBaseT outputs, distances up to 70m at 1080p and 40m at 4Kx2K on a single
CAT5e/6 cable can be achieved.
•The HDBaseT Receivers are powered by the matrix switcher 12VDC by PoC
technology.
•LED indicators show real-time switching status.
•Controllable via front panel, RS232, IR and TCP/IP.
•Support bi-directional IR control.
