SOLIS 1030 Bedienungsanleitung
1
Solis of Switzerland Ltd
Solis-House •Europastrasse 11
CH-8152 Glattbrugg-Zurich •Switzerland
Phone +41 44 874 64 54 •Fax +41 44 874 64 99
SINCE 19
08
Solis of Switzerland Ltd
DIGITAL POCKET SCALE
TYP/TYPE/TIPO 1030
Bedienungsanleitung
Mode d’emploi
Istruzioni per l’uso
User manual
Gebruiksaanwijzing
ENGLISH
We congratulate you on buying this compact
precision scale.
SAFETY NOTES
For reasons of your own well-being, please
take the following safety precautions when
using electrical appliances:
• The appliance is only suitable for domestic
use, not for commercial use.
• This product is not calibrated for commercial
or scientific purposes.
• Use the appliance only with two correctly
inserted AAA 1,5V batteries.
• The appliance must not be operated near
water or other liquids.
• The appliance must not get wet (splash water
etc.) resp. be operated with wet hands.
• Keep the appliance away from hot surfaces.
• Always place the precision scale on a dry, clean,
horizontal work surface before switching it on.
• Use the precision scale only in rooms and at
room temperature.
• Do not shake or move the precision scale
during use.
31
32
• Place the item you wish to weigh in the centre
of the weighing platform in order to accurately
obtain its weight.
• Do not overload the appliance, otherwise the
scale might be damaged (max. 650g).
• In case the LCD display does not display “0.0”
after switching the appliance on, please press
the TARE button.
• The batteries have to replaced once “Lo” lights
up in the display.
• Always dispose of the batteries in an environ-
mentally responsible way.
• Switch the appliance off with the ON/OFF
button after use and before cleaning.
• The appliance should always be covered with
the transparent cover when it is not in use. Do
not place any items on the appliance or on
the transparent cover while the appliance is
in storage. Be careful to prevent the appliance
from falling down.
• Only clean the scale with a dry or slightly
moist towel. Never use aggressive, scouring
or corrosive detergents.
• Repairs to this appliance must only be done by
authorised service centres (e.g. Solis customer
service).
33
• No liability for damage can be assumed and
any guarantee will be voided if the appliance is
used for purposes other than the one specified
in this user manual, if it is improperly operated
or if repair work is carried out unauthorised.
• Persons with limited physical, sensory or mental
capabilities, or persons without the appro-
priate knowledge or experience, including
children, may not use the appliance unless
they are supervised by a person responsible
for their safety or given instruction by such a
person as to how the appliance is to be used.
In addition, they must understand exactly
what hazards may arise from the use of the
appliance and how it can be used in a safe
manner. Cleaning and maintenance of the
appliance may not be carried out by children
unless under supervision.
• Cleaning and maintenance of the appliance
must not be done by unsupervised children.
The device may not be used or cleaned by
children under eight years of age under any
circumstances.
• Do not let children play with the appliance.
• Check the appliance before every use to make
sure that it is without damage and that no
parts have come loose.
34
BEFORE FIRST USE
Open the battery compartment cover on the
bottom of the appliance and insert two AAA
1,5V batteries. Please pay regard to the polar-
ity of the batteries. Push the cover back over
the battery compartment so that it audibly
locks into place.
STARTING UP
1. Place the scale on a dry, clean and even work
surface. Switch the scale on with the ON/OFF
button, the display first states “88888” and
then “0.0g”. “zero” lights up to the left. This
indicates that the scale is functioning properly,
otherwise, the display would permanently
state “88888”.
Notes:
If no weight is placed on the scale, it auto-
matically switches off after 60 seconds.
If the scale was overloaded (max. weight:
650g), the display would state “0_Ld”.
35
2. Use the MODE button to set the desired unit of
measurement. You can select “g”, “oz”, “ozt”
and “ct”. The selected unit of measurement
lights up to the right of the number.
3. Place the item you want to weigh in the centre
of the weighing platform. The correct weight
is being displayed when “hold” lights up to
the left of the number.
4. If before weighing the display does not state
“0.0”, press the TARE button to set the display
to “0.0”. The indication “zero” lights up in the
bottom left corner next to the weight.
20 g
weight
according to
selected unit of
measurement
“0.0” is not
displayed before
weighing
Press
TARE
“0.0”
is displayed
oz
ct
g
ozt
36
Tip: If you have placed a weight on the
weighing platform already and now want
to weigh a new weight, you can press the
TARE button to set the display back to
“0.0”. Only the weight of the second item is
displayed.
5. Press the ON/OFF button if the appliance is
not in use resp. after you have finished using
it to switch the appliance off. Place the trans-
parent cover back on the scale to protect it.
Note: The appliance switches off automati-
cally 60 seconds after the last use.
Explanation of the LCD display
If the scale is overloaded (more than 650 g),
“0_Ld” lights up in the display.
If the batteries are too weak, “Lo” lights up
in the display. In this case, switch the appli-
ance off with the ON/OFF button and change
the batteries.
If the scale has registered the weight of
the item, “hold” lights up in the upper left
corner of the display.
37
CALIBRATION
• For calibration, switch the appliance on with
the ON/OFF button and press and hold the
MODE button for 3 seconds. “CAL” lights
up in the display. Briefly release the MODE
button before pressing it again to calibrate
ZERO.
• Now, “200.0g” lights up in the display. Place a
weight of 200g in the centre of the weighing
platform. If the calibration is correct, “PASS”
lights up in the display. Otherwise, “200.0 g”
flashes permanently in the display. If this is the
case, please repeat the calibration.
• The calibration process has to be performed
carefully and with utmost delicacy, as it cannot
be undone and can only be compensated by
another calibration process. If the weight
used for the calibration process is not exact-
ly “200.0 g”, the scale will display incorrect
weights after calibration.
Press and hold
MODE for 3 sec.
“CAL” is
displayed,
press MODE
again
Apply
200 g weight
Calibration
complete
38
TECHNICAL SPECIFICATIONS
Max. weight 650g
Scale of measurement 0,1g
Overload above 660 g
Units of measurement g/oz/ozt/ct
Automatic shutdown 60 seconds
Batteries 2 x type AAA 1,5V
39
DISPOSAL
EU 2012/19/EU
Information for correct disposal of the
product in accordance with the Euro-
pean Directive EU 2012/19/EU
At the end of its working life this equipment
must not be disposed of as an household
waste. It must be taken to special local com-
munity waste collection centres or to a dealer
providing this service. Disposing of electrical
and electronic equipment separately avoids
possible negative effects on the environment
and human health deriving from an inappro-
priate disposal and enables its components to
be recovered and recycled to obtain significant
savings in energy and resources. In order to
underline the duty to dispose of this equip-
ment separately, the product is marked with
a crossed-out dustbin.
Solis of Switzerland Ltd reserves the right to
carry out technical and visual changes and
modifications to improve the product at any
time.
Andere Handbücher für 1030
1
Inhaltsverzeichnis
Andere SOLIS Skala Handbücher
