Solplanet LT Series Bedienungsanleitung
ASW75K-LT/ASW80K-LT/ASW100K-LT/ASW110K-LT
Quick Installation Guide
Android iosiOS
English Quick Installation Guide…………………………………….......…..……1
Deutsche Schnellinstallationsanleitung……………………………………………14
Nederlands Snelle installatiehandleiding……………………………………………28
Polski Instrukcja szybkiej instalacji…………………………....………………42
Português Guia de Instalação Rápida ………………………………………..……56
Magyar Gyors telepítési útmutató ………………………………………………70
Türkçe Hızlı Kurulum Kılavuzu ……………………………………………….…84
TABLE OF CONTENTS
The product is a transformerless PV inverter which converts the direct current of the PV
generator into grid-compatible three-phase alternating current and then feeds the
three-phase alternating current into the public power grid.
The product is intended for indoor and outdoor applications.
The product must only be connected with PV modules of protection class II (in accor-
dance with IEC 61730, application class A). PV modules with a high capacitance to
ground must only be used if their capacity does not exceed 5μF. Do not connect any
sources of energy other than PV modules to the product.
The product is not equipped with an integrated transformer and therefore has no
galvanic isolation. The product must not be operated with PV modules which require
functional grounding of either the positive or negative PV conductors. This can cause
the product to be irreparablyy damaged. The product may be operated with PV mod-
ules with frames that require protective earthing.
All components must remain within their permitted operating ranges and their installa-
tion requirements at all times.
Use the product only in accordance with the information provided in the user manual
and with the locally applicable standards and directives. Any other application may
cause personal injury or damage to property.
This quick installation guide does not replace the description in the user manual.
The contents of this guide may be updated or revised due to product development. The
information in this guide is subject to change without notice. The latest version of this
document and the manual for installation, commissioning, conguration and decom-
missioning are to be found in PDF format at www.solplanet.net.
2.1 I
ntended use
SAFETY
2
GENERAL INFORMATION
1
QG0040_ASW75-110k-LT_EU_1122
1
2.2
Important safety instructions
The product has been designed and tested strictly according to the international safety
requirements. As with all electrical or electronical devices, there are residual risks
despite careful construction. To prevent personal injury and property damage and to
ensure long-term operation of the product, read this section carefully and observe all
safety information at all times.
DANGER
！
Danger to life due to high voltages of the PV array！
When exposed to sunlight, the PV array generates dangerous DC voltage which is
present in the DC conductors and the live components of the product. Touching the
DC conductors or the live components can cause to lethal electric shocks. If you
disconnect the DC connectors from the product under load, an electric arc may
occur leading to electric shock and burns.
•Do not touch non-insulated cable ends.
•Do not touch the DC conductors.
•Do not touch any live components of the product.
•Do not open the product.
•All work on the product must only be carried out by qualied personnel who have
read and fully understood all safety information contained in this document and
the user manual.
•Disconnect the product from voltage and energy sources and ensure it cannot be
reconnected before working on the product.
• Wear suitable personal protective equipment for all work on the product.
The product must only be used in countries for which it is approved by AISWEI and the
grid operator.
The type label must be permanently attached to the product and must be in a legible
condition.
This document does not replace any regional, state, provincial, federal or national laws,
regulations or standards that apply to the installation, electrical safety and use of the
product.
2
QG0040_ASW75-110k-LT_EU_1122
DANGER
！
Danger to life due to electric shock when touching live system compo-
nents in case of a ground fault！
If a ground fault occurs, parts of the system may still be live. Touching live parts and
cables may result in death or lethal injuries due to electric shock.
•Disconnect the product from voltage and energy sources and ensure it cannot
be reconnected before working on the device.
•Only touch the cables of the PV modules on their insulation.
•Do not touch any parts of the substructure or frame of the PV array.
•Do not connect PV strings with ground faults to the product.
WARNING
！
Danger to life due to electric shock from destruction of the measuring
device due to overvoltage！
Overvoltage can damage a measuring device and result in voltage being present in
the enclosure of the measuring device. Touching the live enclosure of the measuring
device results in death or lethal injuries due to electric shock.
•Only use measuring devices with the measurement span higher than the DC
input voltage range equal to or higher than the voltage rating of the product.
CAUTION
！
Risk of burns due to high temperature.
Some parts of the enclosure can become hot during operation.
•During operation, do not touch any parts other than the enclosure lid of the
product.
CAUTION
！
Risk of injury due to weight of product .
Injuries may result if the product is lifted incorrectly or dropped while being trans-
ported or mounted.
•Transport and lift the product carefully. Take the weight of the product into
account.
• Wear suitable personal protective equipment for all work on the product.
3
QG0040_ASW75-110k-LT_EU_1122
3
EU DECLARATION OF CONFORMITY
3
2.3
Symbols on the label
Beware of a danger zone
This symbol indicates that the inverter must be additionally grounded if additional
grounding or equipotential bonding is required at the installation site.
Beware of high voltage and operating current
The inverter operates at high voltage and current. Work on the inverter must only be
carried out by skilled and authorized electricians.
Beware of hot surfaces
The inverter may become hot during operation. Avoid contact during operation.
Capacitor discharge
Danger to life due to high voltages in the inverter. Do not touch live parts for 25 minu-
tes after disconnection from the power sources.
Observe the documentation
Observe all documentation supplied with the product.
25mins
Within the scope of the EU directives
•Radio Equipment Directive 2014/53/EU
(L 153/62-106. May 22. 2014) (RED)
•Restriction of the use of certain hazardous substances 2011/65/EU
(L 174/88, June 8, 2011) and 2015/863/EU (L 137/10, March 31,2015) (RoHS)
conrms herewith that the products described in this document are in compliance
with the fundamental requirements and other relevant provisions of the above men-
tioned directives. The entire EU Declaration of Conformity can be found at www.sol-
planet.net.
4
QG0040_ASW75-110k-LT_EU_1122
1
12 13 14
2356 7
4
9
810 11
OVERVIEW
4
SCOPE OF DELIVERY
5
Inverterx1
1 DC connector inputs 1-6 （connected to DC switch 1）
2 DC switch 1
5 WiFi stick port
13 RS485 Communication port
14 Reserved grounding - knockout seal
6Reserved terminal
3 DC connector inputs 13-16（connected to DC switch 3）
4 DC switch 3
7 AC cable - knockout seal
9 DC connector inputs 7-12（Connected to DC switch 2）
10 DC switch 2
8 Lock valve
11 DC connector inputs 17-20（Connected to DC switch 4）
12 DC switch 4
Mounting-bracket×1
WiFi stick×1
M4×9 Screws×6
M5×12 Screws×2
M10×20 Bolt×2
RS 485 COM plug×1 DC connector (pair)×16/20
Document packagex1
Handle×4
(Optional)
Lifting ring×2
（Optional）Expansion bolt×4
QG0040_ASW75-110k-LT_EU_1122
5
×
√×
√× ×
√×
√ √ × ×
IP66
4K4H
-25℃
+60℃
≤100%
No touching
by children max.4000m
≥500mm
≥600mm
≥600mm
≥600mm
≥600mm ≥600mm
>75°
√
MOUNTING ENVIRONMENT
6
6
QG0040_ASW75-110k-LT_EU_1122
DIMENSIONS
7
8.1 Take out the inverter
MOUNTING
8
7
330
50
4-φ12
789
984
491
870
Unit：mm
556
QG0040_ASW75-110k-LT_EU_1122
7
8.2 Moving the inverter （Optional）
8.3 Mounting-bracket
1
2
3
90°
M4
1.6N.m
19mm
45N.m
123
456
4-Φ12
65mm
8
QG0040_ASW75-110k-LT_EU_1122
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Sprachen:
Andere Solplanet Wechselrichter Handbücher
Solplanet
Solplanet ASW05kH-T2 Bedienungsanleitung
Solplanet
Solplanet ASW 3-6K S G2 Series Bedienungsanleitung
Solplanet
Solplanet ASW45K-LT-G3 Bedienungsanleitung
Solplanet
Solplanet ASW08KH-T1 Bedienungsanleitung
Solplanet
Solplanet ASW LT G2 Series Bedienungsanleitung
Solplanet
Solplanet ASW LT Series Bedienungsanleitung
Solplanet
Solplanet ASW25K-LT-G3 Bedienungsanleitung
Solplanet
Solplanet ASW LT Series Bedienungsanleitung
Solplanet
Solplanet ASW75K-LT Bedienungsanleitung
Solplanet
Solplanet ASW H-T1 Series Bedienungsanleitung
Solplanet
Solplanet ASW8K-LT-G2 Bedienungsanleitung
Solplanet
Solplanet ASW LT-G2 Pro Series Bedienungsanleitung
Solplanet
Solplanet ASW LT-G2-A Series Bedienungsanleitung
Solplanet
Solplanet ASW30K-LT-G2 Bedienungsanleitung
Solplanet
Solplanet ASW LT-G3 Series Bedienungsanleitung
Solplanet
Solplanet ASW T Series Bedienungsanleitung
Solplanet
Solplanet ASW3K-LT-2 Pro Bedienungsanleitung
Solplanet
Solplanet ASW LT-G2-Pro Series Bedienungsanleitung
Solplanet
Solplanet ASW H-S2 Series Bedienungsanleitung
Solplanet
Solplanet ASW S Series Bedienungsanleitung
