Safety information
Important safety instructions
This document contains important instructions and warnings that must be followed
when installing and maintaining the EV Charger.
Stop using and do not use the EV Charger if it is defective, appears cracked, frayed,
broken, or otherwise damaged, or fails to operate, or continue operation.
Do not touch the EV Charger’s end terminals with sharp metallic objects, such as wire,
tools, or needles.
Read this entire mandatory document before installing or using the EV charger.
Transporting the EV Charger, handle with care. Do not subject it to strong force or
impact or pull, twist, tangle, drag, or step on the EV Charger, to prevent damage to it
or any components.
Never spray water or any other liquid directly at the wall mounted EV Charger. Never
spray any liquid onto the charger handle or submerge the charger handle in liquid.
Store the charger handle above the ground to prevent unnecessary exposure to
contamination or moisture.
Do not forcefully fold or apply pressure to any part of the EV Charger or damage it
with sharp objects.
Do not install or use the EV Charger near flammable, explosive, harsh, or combustible
materials, chemicals, or vapors.
The BCP series EV Charger must be grounded through a permanent wiring system or
an equipment grounding conductor.
Use the EV Charger only within the specified operating parameters.
This device should be supervised when used around children.
Do not attempt to disassemble, repair, tamper with, or modify the EV Charger. The EV
Charger is not user serviceable. Contact us for any repairs or modification.
Warning
Safety information
Use of the EV Charger may affect or impair the operation of any medical or implantable
electronic devices, such as an implantable cardiac pacemaker or an implantable
cardioverter defibrillator. Check with your electronic device manufacturer concerning
the effects that charging may have on such electronic devices before using the EV
Charger.
Do not insert foreign objects into any part of the EV Charger.
Cautions
That cord extension sets are not allowed to be used.
Incorrect installation and testing of the EV Charger could potentially damage either
the vehicle's Battery and/or the EV Charger itself. Any resulting damage is excluded
from New Vehicle Limited Warranty and the EV Charger Limited Warranty.
Do not use private power generators as a power source for charging.
That adaptors or conversion adapters are not addowed to be used.
Do not operate the EV Charger in temperatures outside its operating range of -25℃
to +55℃.
Notes
Ensure that the EV Charger's charging cable is positioned so it will not bestepped on,
driven over, tripped on, or subjected to damage or stress.
Be careful not to damage the circuit board when removing the power entry knock-
out.
Do not use cleaning solvents to clean any of the EV Charger's components.The outside
of the EV Charger, the charging cable, and the connector end of the charging cable
should be periodically wiped with a clean dry cloth to remove accumulation of dirt and
dust.
P-01 P-02
●
●
●
