Soltech SATELIS TLSTD Series Bedienungsanleitung

SATELIS

50W 75W

User Manual

SOLTECH offers Advanced LED

Technology That Is Eco-friendly And

Utilizes Clean Energy.

02 03

01 Check List

02 Introduction

03 Specification

04 Luminous Distribution

05 Battery Notes

06 Installation and Wiring Compliance

07 Mounting Accessories

08 Installation—50W

09 Installation—75W

10 Panel Angle

11 Remote Control Guide

SATELIS 50W

SATELIS 75W

Contents

010

011

012

014

016

018

04 05

01 Check List

SATELIS 50W SATELIS 75W

Solar Panel Solar Panel

Component Kit A Component Kit A

Component Kit D Component Kit D

Component Kit E Component Kit E

Component F Component FComponent G Component GComponent H Component H

Component I Component IComponent J Component JComponent K Component LWire M Wire N

Component Kit B Component Kit BComponent Kit C Component Kit C

Luminaire LuminaireBattery Pack Battery Pack

06 07

02 Introduction

Thank you for purchasing SATELIS Urban Lighting Products.

Introduction

The high-performance SATELIS Series is a municipal-grade solar outdoor

lighting system that provides bright off-grid light. This heavy-duty com-

mercial dedicated series is ideal for highways, city streets, large parking

lots, and area lighting. It comes in a wide choice of conﬁgurations, lighting

outputs, and recommended pole heights. The Satelis series is optimized

to provide years of bright, reliable light. Industry-leading efﬁciency, dense

batteries, and advanced controls to guarantee the highest possible off-

grid autonomy.

Important

In order to avoid deep discharge of the battery during storage, please

fully recharge your battery every 4 months. Please make sure that the

light is installed in an area with sufficient sunlight irradiance. A strict

minimum of 3.5 hours/day of sunshine on average is recommended. Se-

lect the right operating mode according to the local legislation needs and

the local sunshine conditions. Keep it away from shadows. Self-cleaning

available when the light fixture have minimum angle of 15 degrees.

Please save these instructions. Read all of the instructions carefully

before attempting to carry out any installation or wiring. Do not open or

attempt to repair the product on your own, as it many cause serious

damage and would void the product warranty. Contact your local

distributor for any questions concerning the installation.

Range of the light module on the lighting fixture is 20–26 feet

(6–8 meters). The ideal installation spacing is >16 feet(5 meters). When

installing two or more lighting fixtures on one pole, select desired

operating mode before installation. Interference can cause delay or

malfunction when using the remote control to change operating modes

after installation.

Precautions when working with solar panels

When the solar panel is exposed to sunlight, a voltage appears at the

output terminals of the solar panel turning it into a source of electricity.

To avoid a shock hazard, make sure the solar panel is covered with an

opaque (dark) later such as paper or cloth during the installation. Do not

make contact with the terminals when the panel is exposed to sunlight or

any other light source.

SATELIS 50W

SATELIS 75W

26.5 inches 1.3 inches

3.5 inches

11.0 inches

32.0 inches

55.0 inches

1.3 inches

9.5 inches 6.3 inches

49.0 inches

21.5 inches

3.5 inches

11.0 inches

32.0 inches 9.5 inches 6.3 inches

21.5 inches

Specification

LED Nominal Power

Solar Panel

LiFePO4Battery

Weight

Lumen Output@5000K

EPA

Waterproof Rate

CRI

Casting

Efficiency@5000K

LED Chip

* Charging Time

Maximum Autonomy@Full Power

Operation Mode

Installation Height

* Operating Temperature

* Charging Temperature

03 Specification

* The temperature can impact the battery’s charging and normal operation. If your place’s tempera-

ture is under 32°F, we advice you to use the SUNLIKE PRO version to achieve better lighting results.

* The solar charge time data is base on 25 degree Celsius ambient temperature with the panel

pointed vertically at the solar radiation. The standard radiation value is 1000W/Sqm2.

SATELIS 50W SATELIS 75W

50W 50W 75W 75W

36V 130W

200lm/W

6hrs 12hrs 5hrs 9hrs

15–20 ft

-4 to 122˚F -4 to 122˚F -4 to 122˚F -4 to 122˚F

15–20 ft 15–20 ft 15–20 ft

200lm/W 200lm/W 200lm/W

768WH 25.6V 30AH

91.8Lbs 107.6Lbs 135.6Lbs 150.6Lbs

10,000

11.3 ft2

IP65 IP65 IP65 IP65

11.3 ft218.1 ft218.1 ft2

10,000 15,000 15,000

1,536WH 25.6V 60AH 1,536WH 25.6V 60AH 2,304WH 25.6V 90AH

36V 130W 36V 260W 36V 260W

> 70 (> 80 Optional) > 70 (> 80 Optional) > 70 (> 80 Optional) > 70 (> 80 Optional)

Aluminum Aluminum Aluminum Aluminum

Lumileds 5050

(215lm-CR>70)

Lumileds 5050

(215lm-CR>70)

Lumileds 5050

(215lm-CR>70)

Lumileds 5050

(215lm-CR>70)

Remote control and

One-key Setting

Remote control and

One-key Setting

Remote control and

One-key Setting

Remote control and

One-key Setting

32 ˚F to 149 ˚F 32 ˚F to 149 ˚F 32 ˚F to 149 ˚F 32 ˚F to 149 ˚F

Motion Sensor Mode

Time Control Mode

Constant Mode

40%–100% 63hrs 40%–100% 126hrs 40%–100% 84hrs 40%–100% 126hrs

Night Owl 38hrs Night Owl 76hrs Night Owl 50hrs Night Owl 75hrs

100% 15hrs 100% 30hrs 100% 20hrs 100% 30hrs

70% 21hrs 70% 42hrs 70% 28hrs 70% 42hrs

40% 37hrs 40% 74hrs 40% 50hrs 40% 75hrs

20%–80% 105hrs 20%–80% 210hrs 20%–80% 140hrs 20%–80% 210hrs

Early Bird 34hrs Early Bird 68hrs Early Bird 45hrs Early Bird 67.5hrs

08 09

04 Luminous Distribution

SATELIS 50W Type III

SATELIS 75W Type III

Battery pack Disconnect wires

Disconnect wires

1. The LiFePO4-battery-powered SATELIS lights are visibly brighter

than other outdoor solar lights, and their performance overall is

more reliable.

2. To charge the battery fully may take up 6 to 12 hours.

3. Output will be reduced to 40% when the battery is below 40% of

its capacity.

4. Battery will stop charging when the ambient temperature is below

32°F or above 149°F.

Battery Status is indicated by the red/green indicator on the lighting

fixture as follows:

- Red indicator (Charging)

> Slow red light flashing = Charging

> Red light continuously on = fully charged

> Quick red flashing = charge fault

- Green indicator (not charging)

> Green light continuously on = more than 40% of the battery

capacity remaining

> Slow green light flashing = battery capacity below 10%

> Quick green light flashing = battery below 0% mode—Protect

battery does not over discharging

Storage

To avoid over discharge of the battery during storage, please recharge

the lighting fixture every 4 months. Use the dedicated charger to charge,

reset the switch when done.

Battery Replacement

1. Loosen the screws of the

battery pack.

2. Disconnect the wire

connectors.

3. Take out the battery pack.

4. Replace with a new one,

connect the wire connectors.

5. Tighten the screws.

(IAP) Intelligent Adaptive Program Battery

Control Technology

In order to extend the off-grid autonomy

of the SATELIS under shady trees, heavy

rain, and thick clouds, our controllers now

integrate an adaptive smart control feature

to actively track battery capacity and adjust

light output accordingly. Before integrating

this feature, selecting a light output percent-

age on the remote would yield an accurate

percentage of max LED brightness. Now with

(IAP), the controller actively monitors the

battery and regulates the electrical current

to the LEDs. The controller makes light output

of the selected percentage on the remote

relative to battery capacity rather than max

LED output. This smart-control feature can

increase our off-grid performance by up

to 40%. 0102

05 Battery Notes

010 011

Max 29.5 inches

06 Installation and Wiring Compliance

1. Installation and wiring must comply with the State and National

Electrical Codes.

2. The SATELIS 50W and 75W models are intended for outdoor use

only and should not be installed in an unventilated area, and shall be

installed in an environment within the operational temperatures

defined for the product.

3. The average sunshine in the installation area should be above

3.5 hours/day in order to ensure full function of the lighting fixture.

Avoid areas with shades.

4. Before installation, if applicable, please ensure the light pole and its

foundation are solid enough to withstand the lighting fixture(s).

5. Before installation, please ensure that the battery is fully charged. Install

during sunny days if possible.

6. Before installation, please press the ON/OFF key in the remote

control and check whether it shows a red light on the indicator.

Please cover the panel and check if the light module turns on normally

within 1 minute.

After Installation

The lighting fixture will automatically turn on at night and turn off

during daylight.

Important

Always orient the solar panel facing the equator (e.g. facing south if in

northern hemisphere).

Always have a tilt angle of at least 15° to avoid dust accumulation

(0°=horizontal plane).

Ordering Information Chart

Sample Number: TLSTD50XYYZZ

For example: TLSTD503SFGY

This means the customer wants a Satelis 50 watt, 3000K CCT, Slip

Fitter installation, with a gray finish.

DO NOT send the sample number directly to our sales. Use the

information in the chart above to create a model number with

the correct series, wattage, temperature, mounting option, and finish

for the product that you want.

Series Wattage Color

Temperature

Mounting

Options Finish

TLSTD=SATELIS 50=50W 10000 Lumens

75=75W 15000 Lumens

X=3=3000K

X=4=4000K

X=5=5000K

X=6=5700K

YY=SF=Slip Fitter ZZ=GY=Gray

ZZ=BZ=Bronze

07 Mounting Accessories

Create 2 holes (diameter 0.5 inch) in the middle of pole, create 1 hole

(diameter 1.5 inch, 2.6 inch long) between the 2 holes.

If your round pole size is over 3.1 inches, or you need a square pole, please

contact the pole manufacturer for the tenon adapter.

SLIP FITTER

POLE ASSEMBLY TENON ADAPTER

SOLAR PANEL SUPPORT BASE—CUTAWAY

Pole Size For Slip Fitter

1.8 inches

31.0 inches

Ø3.0 inches–Ø5.5 inches

Ø3.1 inches Ø3.1 inches

2.5 inches–5.0 inches

Ø1.5 inches Ø1.5 inches

Ø0.5 inch Ø0.5 inch

Max 29.5 inches

2.4 inches

Top of Pole—

Round

Top of Pole—

Square

Tenon Adapter—Round Tenon Adapter—Square

7.2 inches

Pole

3.1 inches

0.4 inch

8.2 inches 5.3 inches 7.1 inches

2.2 inches

3.1 inches

9.5 inches 9.5 inches

2.6 inches 2.6 inches

012 013

08 Installation—50W

Satelis 50W

01 02

03 04

Solar Panel

Component K

Component Kit A

Component Kit B

Component Kit D

Component F

Component Kit C Wire M

Connect

Wire M comes

inside the pole

and comes out

from the hole.

The luminare wire comes inside the

component J.

Component G

Component H

Component I

Luminaire

Component J

Component Kit E

Connect

The luminare wire comes inside

the component H and comes out from

the hole.

If your round pole size is over 3.1

inches, or you need a square pole,

please contact the pole manufacturer

for the tenon adapter to connect

the componet F.

Battery Pack

Component E

Component H

Tenon Adapter

014 015

09 Installation—75W

Satelis 75W

01 02

03 04

Solar Panel

Component L

Component Kit A

Component Kit B

Connect

Wire N

Component H

Component I

Component Kit C

Component G

Wire N comes

inside the pole

and comes out

from the hole.

Luminaire

Component J The luminare wire comes inside the

component J.

Component Kit E

The luminare wire comes inside

the component H and comes out from

the hole. Component H

Component E

Connect

Battery Pack

Component Kit D

Component F

If your round pole size is over 3.1

inches, or you need a square pole,

please contact the pole manufacturer

for the tenon adapter to connect

Tenon Adapter

016 017

Alaska

25° N

0°– 13°

13°– 26°

26°– 37°

37°– 45°

19° N

21° N

26° N

20° N

27° N

28° N

29° N

30° N

31° N

32° N

33° N

34° N

35° N

36° N

37° N

38° N

39° N

40° N

41° N

42° N

43° N

44° N

45° N

46° N

47° N

48° N

60° N

49° N

Washington

Oregon

California

Nevada

Arizona

Utah

New Mexico

Kansas

Colorado

Oklahoma

Texas

North Dakota

South Dakota

Nebraska

Idaho

Montana

Wyoming

61° N

62° N

63° N

64° N

65° N

70° N

66° N

67° N

68° N

69° N

Hawaii

The Solar charge in a battery pack won’t last forever. The off–grid

system relies on stored solar energy for autonomy. Angling your solar

panels properly can boost the power intake of your solar lighting

system. You want to angle your solar panels at a tilt based on the

area’s latitude.

Tip

You can increase the tilt 15° in the winter or decrease 15° in the summer.

In this way you can get the maximum sunlight to recharge the battrey.

Strong sunlight Nromal sunlight Less sunlight

Key

The area will dictate the installation of the fixtures and will sometimes

prevent the lights from facing south. But that’s okay! Panels facing West

& East won’t get as much light as Southern facing panels, but will still

collect a good amount of sunlight. A North facing panel also works, but

it will take longer to charge than any other direction. This would mean

that the solar charge will be less optimal if installations are facing North.

0°– 13°

13°– 26°

37°– 45°

45°

37°– 45°

Arkansas

Louisiana

Mississippi

Alabama Georgia

South

Carolina

North

Carolina

Virginia

West

Virginia

Kentucky

Illinois

Wisconsin

Minnesota

Iowa

Missouri

Michigan

Indiana

Ohio

Pennsylvania

New York Massachusetts

Rhode Island

Connecticut

New Jersey

Delaware

Maryland

Tennessee

Florida

World Wide Panel Angles

Best Facing Direction of Solar Panel

Best

Worst

OKOK

New Hampshire

Vermont Maine

26°– 37°

10 Panel Angle

018 019

11 Remote Control Guide

1. On/Off 2. Connect/Test

4. 20%~80% Motion

Sensor Mode (Default)

6. Early Bird Mode

8. 70% Constant Mode

10. Timer Mode Disabled

12. Time Mode 8 Hours

3. 40%~100% Motion

Sensor Mode

5. Night Owl Mode

7. 100% Constant Mode

9. 40% Constant Mode

11. Timer Mode 4 Hours

1. On/Off

When off is selected, the light will stop working. The solar panel will not

charge the battery and the battery will not supply electricity to the light.

2. Connect/Test

Remote control device can be connected with any lighting fixture, one

at a time. To connect, press the button once. It also functions as a test

button. To test, press the “Test” button once, the red light will indicate

the fixture is charging, green light indicates that the fixture is operating.

Testing lasts for 10 seconds, and then it goes back to the mode previously

in use.

When using the remote for the first time, please remove the plastic

piece at the bottom to make the remote turn on.

The range of the remote control to the

indicator is 16ft (Day time) to 33ft (Night

time). Because the sunlight will impact

the signal of the remote control, we suggest

our users to setup the mode before they

install the light.

3. 40%~100% Motion Sensor Mode

Constant 40% brightness (turns on at dusk, turns off at dawn);

100% brightness turns on for 2 minutes when motion is detected.

4. 20%~80% Motion Sensor Mode (Default)

Constant 20% brightness (turn on at dusk, turn off at dawn);

80% brightness turns on for 2 minutes when motion detected.

5. Night Owl Mode

Changes as natural light decreases/increases (turns on at dusk); 70%

brightness for 0.5 hour, 100% brightness for 3.5 hours, 70% bright-

ness for 1 hour, 50% brightness for 1 hour, 20% brightness for 5

hours (turns off at Dawn).

6. Early Bird Mode

Changes as natural light decreases/increases with increased brightness

near dawn for early risers (turns on at dusk); 70% brightness for 0.5

hour, 100% brightness for 3.5 hours, 70% brightness for 1 hour, 50%

brightness for 1 hour, 20% brightness for 4 hours, 100% brightness for 1

hour (turns off at Dawn).

Important

Dust and dawn time can vary for different locations and seasons.

The sensors in our products will monitor the light levels where it is

installed. The time period shown in the chart above is just an example

to help you understand the different lighting modes.

(IAP) Intelligent Adaptive Program Battery Control Technology

In order to extend the off-grid autonomy of the SATLIES under shady

trees, heavy rain, and thick clouds, our controllers now integrate an

adaptive smart control feature to actively track battery capacity and

adjust light output accordingly. Before integrating this feature, select-

ing a light output percentage on the remote would yield an accurate

percentage of max LED brightness. Now with (IAP), the controller

actively monitors the battery and regulates the electrical current to

the LEDs. The controller makes light output of the selected percentage

on the remote relative to battery capacity rather than max LED output.

This smart-control feature can increase our off-grid performance by

up to 40%.

16ft–33ft

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Soltech Wechselrichter Handbücher

Soltech

Soltech SOLPORT 15W Bedienungsanleitung

Soltech

Soltech TWINKO Bedienungsanleitung

Soltech

Soltech SATELIS THERMO 50W Bedienungsanleitung

Soltech

Soltech SUNLIKE 8W Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

Astrel Group

Astrel Group Power Reducer Kurzanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung