SOLTEK SL-67D Bedienungsanleitung
i
Notice to End Users
This UserÕs Guide & Technical Reference is for assisting system
manufacturers and end users in setting up and installing the
mainboard.
Every effort has been made to ensure that the information in this
manual is accurate. Soltek Computer Inc. is not responsible for
printing or clerical errors. Information in this document is subject to
change without notice and does not represent a commitment on the
part of Soltek Computer Inc.
No part of this manual may be reproduced, transmitted, translated
into any language in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose
without the express written permission of Soltek Computer Inc.
Companies and products mentioned in this manual are for
identification purposes only. Product names appearing in this
manual may or may not be registered trademarks or copyrights of
their respective companies.
SOLTEK COMPUTER INC. PROVIDES THIS MANUAL ÒAS ISÓ
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL SOLTEK COMPUTER
INC. BE LIABLE FOR ANY LOSS OR PROFITS, LOSS OF BUSINESS, LOSS
OF USE OR DATA, INTERRUPTION OF BUSINESS, OR FOR INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
KIND, EVEN IF SOLTEK COMPUTER INC. HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
© Copyright 1998 Soltek Computer Inc. All right reserved
Web site: http://www.soltek.com.tw
email: [email protected]
Edition: September 1998
Version: 1.0
SL-67D SERIALS
®
Contents iii
Contents
Chapter 1: Introduction --------------------------------------- 1
Features -------------------------------------------------------------------------1
CPU ------------------------------------------------------------------------1
Chipset -------------------------------------------------------------------- 1
L2 Cache ------------------------------------------------------------------1
Main Memory ----------------------------------------------------------- 1
BIOS ------------------------------------------------------------------------ 2
Super I/O Function ----------------------------------------------------2
OPTi 933 Sound Chip Features-------------------------------------- 2
Other Functions --------------------------------------------------------- 3
Mainboard Layout with Default Settings ------------------------------4
Chapter 2: Hardware Setup---------------------------------- 5
CPU Type Configuration---------------------------------------------------5
CPU 3.5X Clock Setting ----------------------------------------------- 5
Deschutes Ð 350/100MHz ---------------------------------------5
Pentium II (Celeron) Ð 233/66MHz---------------------------5
CPU 4.0X Clock Setting ----------------------------------------------- 6
Deschutes Ð 400/100MHz ---------------------------------------6
Pentium II (Celeron) Ð 266/66 MHz -------------------------- 6
CPU 4.5X Clock Setting ----------------------------------------------- 6
Deschutes Ð 450/100MHz ---------------------------------------6
Pentium II (Celeron) Ð 300/66 MHz -------------------------- 6
CPU 5.0X Clock Setting ----------------------------------------------- 7
Deschutes Ð 500/100MHz ---------------------------------------7
Pentium II (Celeron) Ð 333/66 MHz -------------------------- 7
System Memory Configuration------------------------------------------- 7
CPU Installation -------------------------------------------------------------- 8
iv
Jumper Settings ------------------------------------------------------------- 12
FANX: Onboard FAN (12V) Connector ------------------------ 12
JBAT1: Clear CMOS Data ------------------------------------------ 12
JP1: Onboard Sound Chip Enabled/Disabled ---------------- 12
J5, J6: Sound Amplifier Control (Speaker/Line Out) ------- 13
SW1: 5Ð6 Bus Clock Select ----------------------------------------- 13
SW1: 1Ð4: Bus Ratio Select ----------------------------------------- 14
IDE LED Activity Light: (J2 pin1Ð4)------------------------------ 14
Sound Connector:----------------------------------------------------- 14
J3/J4: CD-ROM Audio Connector ------------------------- 14
Game/MIDI Port ------------------------------------------------ 14
Mic: Microphone Jack ----------------------------------------- 14
Line In: Audio in Jack ----------------------------------------- 14
Speaker Out/Line Out: Audio Out Jack ------------------ 14
Infrared Port Module Connector (J2 pin6Ð10) ----------------- 15
J2 pin12, 13: PWR Switch------------------------------------------- 15
SLEEP Switch (J2 pin14, 15) ---------------------------------------- 15
Speaker Connector (J1 pin1Ð4) ------------------------------------ 15
Reset Switch (J1 pin5, 6)--------------------------------------------- 15
JSB1: Audio Socket (SB Link)-------------------------------------- 15
Power LED and Keylock Switch (J1 pin8Ð12)------------------ 15
JWOL1: Wake On Lan (WOL) Connector ---------------------- 16
Turbo LED (J1 pin14, 15)-------------------------------------------- 16
J2 Switch Signal Summary ----------------------------------------- 17
J1 Switch Signal Summary ----------------------------------------- 18
Chapter 3: BIOS Setup ---------------------------------------19
Standard CMOS Setup ---------------------------------------------------- 20
BIOS Features Setup ------------------------------------------------------- 22
Chipset Features Setup --------------------------------------------------- 26
Power Management Setup ----------------------------------------------- 29
PnP/PCI Configuration Setup ------------------------------------------ 33
Load Setup Defaults ------------------------------------------------------- 37
Integrated Peripherals ---------------------------------------------------- 38
Supervisor/User Password---------------------------------------------- 41
IDE HDD Auto Detection ------------------------------------------------ 42
Save & Exit Setup ---------------------------------------------------------- 42
Exit Without Saving ------------------------------------------------------- 42
Introduction 1
Chapter 1
Introduction
Features
CPU
1. Supports Intel Pentium II, Deschutes, and Celeron
(Mendocino) CPUs using SLOT1 at 233 ~ 533 MHz
(PII/Celeron (Mendocino)) or 800MHz (Deschutes)
2. Supports CPU voltage autodetect circuit
3. Supports 66/100MHz Bus Clock (BIOS provides
75/103/112/124 MHz Bus Clock without auto detect)
Chipset
1. VIA Apollo Pro chipset
2. PCI Rev 2.1, 5V, 33MHz interface compliant
3. Supports AGP 1X/2X Mode, 3.3V AGP (Accelerated
Graphics Port) slot
4. Onboard built-in OPTi 933 sound chip
L2 Cache
1. Mendocino (Celeron A), PII (Deschutes) supports
128K/512k write back cache with Pipelined Burst
SRAMs
Main Memory
1. Memory range from 8MB (minimum) to 768 (SDRAM)
(maximum) with DRAM Table Free configurations
2. Supports SDRAM with 12/10/8ns DRAM speed
2
3. Supports 3 pcs 168pin DIMM sockets (3.3V
Unbuffered type)
4. DRAM supports ECC or Parity function
BIOS
1. AWARD Plug and Play BIOS
2. Supports Advanced Power Management Function
3. Flash Memory for easy upgrade
Super I/O Function
1. Integrated USB (Universal Serial Bus) controller with
two USB ports.
2. Supports 2 IDE channels with 4IDE devices (including
120MB IDE floppy)
3. Provides PCI IDE Bus Master function and supports
Ultra DMA33 function
4. One floppy port, one Game port
5. Two high speed 16550 FIFO UART ports
6. One parallel port with EPP/ECP/SPP capabilities
7. PS/2 mouse connector
8. Built-in RTC, CMOS, keyboard controller on single I/O
chip
9. Peripherals boot function (with ATX power)
OPTi 933 Sound Chip Features
1. Integrated sound controller compatible with:
Ñ Sound Blaster Proª
Ñ AdLibª
Ñ Microsoft¨ Windowsª Sound Systemª
Ñ MPU-401 MIDI interface
2. Microsoft¨ PC-97 compliant
3. Built-In QSound QXpanderª 3D Sound Enhancement
Processor
4. Built-in high-quality 22 voice, 52 operator, OPTIFMª
music synthesizer with enhanced bass
5. Built-in 7-channel mixer: five stereo, two mono
6. Built-in 16-bit sigma delta stereo codec
7. ISA Plug and Play Specification 1.0a compatible:
Ñ Sound Blaster Pro, Windows Sound System, FM
synthesis
Introduction 3
8. Full duplex operation: record and playback
simultaneously using two 8- or 16-bit DMA channels
9. Supports IMA ADPCM, µ-law, A-law decompression
10. 8- or 16-bit stereo sound data up to 48KHz stereo
11. Supports 16-bit Type F DMA playback, accelerates
telephony-audio applications
12. Digital joystick interface support, improves
responsiveness (Microsoft SideWinderª)
13. DirectSoundª interface support.
Other Functions
1. ATX size 19cm x 30.5cm
2. 4 PCI Master slots, 2 ISA slots, and 1 AGP slot
3. Supports CPU temperature warning function (optional)
4. Provides DIP switch setting
5. Supports 66/100MHz Bus Clock*
6. Supports Wake On LAN function**
7. BIOS supports 75/103/112/124MHz Bus clock.
*: For 100MHz CPU environment, the SDRAM specification
must be compliant with PC-100 Spec.
**: For support WOL, the ATX power supply has to have at
least 5V/720mA standby current.
4
Mainboard Layout with Default Settings
The default settings of the following figure is for the
Pentium II (Celeron (Mendocino)) 300/66MHz.
VIA
VT82C596
Chipset
J2
HD/LED IR PWR/SW
J1
GRN-LED
EXTSM1
KEYLOCKRESETSPK
16Bit ISA Slot
Li
Battery
PCI1
JBAT1
1
AGP1
FDD1
IDE2
SLOT1 (Pentium II, Celeron (Mendocino), or Deschutes)
VIA
Apollo Pro
Chipset
SW1
6
5
4
3
2
1
Off
Off
On
On
On
Off
LPT1
COM1 COM2
USB0
USB1
PS/2
K/B
Upper
Lower
JWOL1
16Bit ISA Slot
FLASH BIOS
PCI2
PCI3
PCI4
JP1
1
Multi I/O
OPTi
82C933
FAN1
JSB1
2
6
1
5
J3J4
J5
1
J6
1
FAN2
FAN3
DIMM 3
DIMM 2
DIMM 1
IDE1
ATX Power Conn
MIC
Game/MIDI Port
LIN
IN SPK/
LINE
OUT
Figure 1–1. Motherboard Layout
Note: For 100MHz CPU environment, the SDRAM
specification must comply with PC-100 spec.
Hardware Installation 5
Chapter 2
Hardware Setup
CPU Type Configuration
CPU 3.5X Clock Setting
Deschutes – 350/100MHz
Pentium II (Celeron) – 233/66MHz
SLOT1
SW1
6
5
4
3
2
1
LPT1
COM1 COM2 USB0
USB1 PS/2
K/B
MIC
Game/MIDI Port
LIN SPK
Deschutes – 350/100MHz
SW1
654321
Off
Off
On
On
On
Off
Penrium II – 233/66MHz
SW1
654321
Off
Off
On
On
On
Off
ONON
Figure 2–1. CPU Type Configuration
6
CPU 4.0X Clock Setting
Deschutes – 400/100MHz
Pentium II (Celeron) – 266/66 MHz
SLOT1
SW1
6
5
4
3
2
1
LPT1
COM1 COM2
USB0
USB1
PS/2
K/B
MIC
Game/MIDI Port
LIN SPK
Deschutes – 400/100MHz
SW1
654321
Off
On
On
On
On
Off
Penrium II – 266/66MHz
SW1
654321
Off
On
On
On
On Off
ONON
Figure 2–2. CPU Type Configuration
CPU 4.5X Clock Setting
Deschutes – 450/100MHz
Pentium II (Celeron) – 300/66 MHz
SLOT1
SW1
6
5
4
3
2
1
LPT1
COM1 COM2
USB0
USB1
PS/2
K/B
MIC
Game/MIDI Port
LIN SPK
Deschutes – 450/100MHz
SW1
654321
Off
Off
On
On
On
Off
Penrium II – 300/66MHz
SW1
654321
Off
Off
On
On
On Off
ONON
Figure 2–3. CPU Type Configuration
Inhaltsverzeichnis
Andere SOLTEK Hauptplatine Handbücher
SOLTEK
SOLTEK SL-B8D-F Bedienungsanleitung
SOLTEK
SOLTEK SL-85SID Bedienungsanleitung
SOLTEK
SOLTEK 85DRV4-C Bedienungsanleitung
SOLTEK
SOLTEK SL-865G Bedienungsanleitung
SOLTEK
SOLTEK SL-85MR2 Bedienungsanleitung
SOLTEK
SOLTEK 86SP2 Bedienungsanleitung
SOLTEK
SOLTEK SL-65MIV Bedienungsanleitung
SOLTEK
SOLTEK SL-65KVB Bedienungsanleitung
SOLTEK
SOLTEK SL-67FV1 Bedienungsanleitung
SOLTEK
SOLTEK KT333A Bedienungsanleitung
SOLTEK
SOLTEK SL-B5A-FG Bedienungsanleitung
SOLTEK
SOLTEK SL-B8E-FG Bedienungsanleitung
SOLTEK
SOLTEK SL-85MIR3 Bedienungsanleitung
SOLTEK
SOLTEK 85MR3-R Bedienungsanleitung
SOLTEK
SOLTEK SL-85DRS Bedienungsanleitung
SOLTEK
SOLTEK SL-75KAV Bedienungsanleitung
SOLTEK
SOLTEK 65kv Bedienungsanleitung
SOLTEK
SOLTEK SL-54A2 Bedienungsanleitung
SOLTEK
SOLTEK SL-65ME-T Bedienungsanleitung
SOLTEK
SOLTEK 86SP3 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
