SOMFY Glydea Betriebsanleitung

GLYDEA MOTOR with RS485

Programming Guide

1COMMUNICATION SETTINGS

4800 BAUD

8 DATA BITS

ODD PARITY

1 STOP BIT

1. Select the correct COM port.

2. Click on “RTS”, then click on CONNECT

3. Click on “Get MTR Addr.” The default address, ABCDEF, will appear if unprogrammed.

4. Under Group Addresses, Assign an address to Group 1. It should be a 6bit Hex Address. This will then become the Motor Address for

the Glydea.

5. Up to 5 Group Address can also be assigned at this time in locations 2 through 6.

6. Click on “Set”. Allow 10 seconds for data transfer between PC and Motor.

7. Click on “Get MTR Addr” and verify the motor address has been updated.

8. Click on “Get” under GROUP ADDRESSES and verify the group addresses are set correctly.

Somfy’s configuration software is located on-line at: http://www.somfy.us/Apps/SDNSoftware/ILT2-ST30-3.5.2.exe

A USB to RS485 converter is recommended (Part 9015260).

2ASSIGN ADDRESS

1. Click on “Group Motor Address.”

2. Enter the Motor Address just assigned. Click on “All Commands”.

3. Click on “Calculate”. All the command strings will be filled in automatically.

4. Only the following commands can be used with the Glydea Motor:

UP, STOP and DOWN

Somfy’s command calculator is located on-line at:

http://www.somfy.us/Apps/SDNSoftware/ILT%20Command%20Calc.exe

3GET COMMANDS

4CONNECTION DIAGRAM

MOTOR HEAD

RJ45

MODULAR

PLUG

Power Plug

120v AC

CAT5 CABLE

SDN BUS

CAT5 CABLE

RS485

24V DC

Bus Power Supply

RS485 Interface

1870127

SOMFY SYSTEMS, INC. 9/11

Ref. No.: 2500129 C

SOMFY SYSTEMS, INC.

121 Herrod Boulevard

Dayton, NJ 08810

SOMFY CANADA

6315 Shawson Drive, Unit #1

Mississauga, Ontario L5T1J2

SOMFY SYSTEMS, INC. reserves the right to change,

update or improve this document without prior notice.

5RESET TO DEFAULT

To change the Motor Address back to the default (ABCDEF), press and hold the reset button until the LED turns on.

LED

Reset

Button

Andere Handbücher für Glydea

1

Inhaltsverzeichnis

Andere SOMFY Motor Handbücher

SOMFY

SOMFY SGH RTS Bedienungsanleitung

SOMFY

SOMFY Sonesse Ultra 50 RTS Bedienungsanleitung

SOMFY

SOMFY LOGGIA RTS Bedienungsanleitung

SOMFY

SOMFY OXIMO 40 AUTO io Bedienungsanleitung

SOMFY

SOMFY J4 io Bedienungsanleitung

SOMFY

SOMFY LIGHTING OUTDOOR RTS Betriebsanleitung

SOMFY

SOMFY Sonesse 40 PA Bedienungsanleitung

SOMFY

SOMFY Maestria 50 RTS Betriebsanleitung

SOMFY

SOMFY SGH io Montageanleitung

SOMFY

SOMFY IXENGO JS 230V Bedienungsanleitung

SOMFY

SOMFY Roll Up 28 WireFree RTS Bedienungsanleitung

SOMFY

SOMFY Sonesse Ultra 50 RS485 Bedienungsanleitung

SOMFY

SOMFY TLW25 WT Bedienungsanleitung

SOMFY

SOMFY DR1000 Bedienungsanleitung

SOMFY

SOMFY Altus RTS Gebrauchsanweisung

SOMFY

SOMFY ILT 2 Bedienungsanleitung

SOMFY

SOMFY Glydea ULTRA DIGITAL NETWORK Betriebsanleitung

SOMFY

SOMFY J4 1TN Bedienungsanleitung

SOMFY

SOMFY Sonesse 30 PoE Bedienungsanleitung

SOMFY

SOMFY Sonesse Ultra 50 DC RS485 Bedienungsanleitung

SOMFY

SOMFY Tilt & Lift 25 RTS Central Bedienungsanleitung

SOMFY

SOMFY sonesse 30 rts Bedienungsanleitung

SOMFY

SOMFY Sonesse 28 WF Zigbee Bedienungsanleitung

SOMFY

SOMFY J4 RTS Montageanleitung

Beliebte Motor Handbücher anderer Marken

Rotax

Rotax 125 senior MAX evo Bedienungsanleitung

Kohler

Kohler K361 Bedienungsanleitung

MTD

MTD OHV Series Bedienungsanleitung

Kohler

Kohler COMMAND CH18-745 Bedienungsanleitung

Mercury

Mercury D4.2L D-Tronic Bedienungsanleitung

Selve

Selve SE Plus-RC Series Bedienungsanleitung

Perkins

Perkins 1206E-E66TA Bedienungsanleitung

Skov

Skov DA 174 Handbuch

Rossi

Rossi TX11 Series Bedienungsanleitung

Siemens

Siemens SIMOTICS T-1FW3 Merkblatt

AL-KO

AL-KO PRO 350 Bedienungsanleitung

MTU

MTU 12 V 4000 Lx4 Bedienungsanleitung

Nanni

Nanni N3.30 Gebrauchsanweisung

Nanni

Nanni N5.160 CR2 Bedienungsanleitung

KSB

KSB SuPreme Series Montageanleitung

Hiwin

Hiwin EM1 Series Bedienungsanleitung

Rotax

Rotax 912 i series Betriebsanleitung

Siemens

Siemens SIMOTICS XP 1MB1 Bedienungsanleitung