Sonance SONANCE ARCHITECTURAL SERIES ASBPC3RS Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Sonance Sprecher Handbücher

Sonance

Sonance Silhouette I Bedienungsanleitung

Sonance

Sonance CR101 Bedienungsanleitung

Sonance

Sonance Merlot 421MR Bedienungsanleitung

Sonance

Sonance VIRTUOSO A800DR Bedienungsanleitung

Sonance

Sonance Cinema Ultra II THX Series Bedienungsanleitung

Sonance

Sonance PROFESSIONAL Series Bedienungsanleitung

Sonance

Sonance MERLOT 422M Bedienungsanleitung

Sonance

Sonance PROFESSIONAL MKII Series Bedienungsanleitung

Sonance

Sonance ThinLine TL623R Bedienungsanleitung

Sonance

Sonance Ellipse 1.0 LCR Bedienungsanleitung

Sonance

Sonance SST Bedienungsanleitung

Sonance

Sonance SB46-55 Bedienungsanleitung

Sonance

Sonance NACSound Bedienungsanleitung

Sonance

Sonance VP65 XT Bedienungsanleitung

Sonance

Sonance SONOS Bedienungsanleitung

Sonance

Sonance Virtuoso V834D Bedienungsanleitung

Sonance

Sonance Visual Performance VP69 Bedienungsanleitung

Sonance

Sonance 625 Bedienungsanleitung

Sonance

Sonance Mariner 52SS Bedienungsanleitung

Sonance

Sonance X4 Series Bedienungsanleitung

Sonance

Sonance M Series Bedienungsanleitung

Sonance

Sonance MAG8R Bedienungsanleitung

Sonance

Sonance CRK 20 Bedienungsanleitung

Sonance

Sonance Symphony S624T Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung

Tannoy

Tannoy SYSTEM 600a Bedienungsanleitung

Remove the paint shield from the finished

mounting platform.

Cut the four tabs on the sanding shield support

structure on the bracket. NOTE: The port

tube tether is connected to the zip tie for

easy access.

Remove sanding shield support structure.

Use the tether to guide the port tube through

the back of the mounting platform. Do not

remove foam insert from port tube yet.

1

3

2

Port Tube

Tether

Expose 6” (152mm) of port tube through speaker

opening. Remove foam insert from port tube.

4

(1) Quickstart guide

(1) Bandpass connector

(1) Round grille

(1) Square grille

(1) Hose clamp for port tube

(1) Grille painting instructions

(1) Set of speaker screws w/ Loctite®

Box Contents

AS BANDPASS CONNECTOR QUICKSTART GUIDE

ASBPC3RS AND ASBPC6RS (ROUND AND SQUARE)

SONANCE ARCHITECTURAL SERIES®

©2014 Sonance. All rights reserved.

Sonance and Architectural Series are registered trademarks of Dana Innovations.

Due to continuous product improvement, all features and specifications are subject to change without notice.

For the latest Sonance product specification information, visit our website: www.sonance.com

SONANCE • 212 Avenida Fabricante • San Clemente, CA 92672-7531 USA

(800) 582-7777 or (949) 492-7777 • FAX: (949) 361-5151 • Technical Support: (800) 582-0772

www.sonance.com

05.15.1433-5947

Place the hose clamp (A) around the ASBPS port

tube. Slide the port tube over the bandpass

connector (B). Orient the port tube on the bandpass

connector so the mounting screw locations in the

bracket and bandpass connector line up.

56

7 8

A

B

For wiring diagrams and detailed

eManual scan the QR code or visit

www.sonance.com/in-wall-in-ceiling/

architectural-series

Tighten the hose clamp around the bandpass

connector and port tube. The slots in the mounting

platform allow clearance for the hose clamp.

Orient the hose clamp to go through one of the

openings. Place the port tube and connector into

the mounting platform.

Apply Loctite® to screws and screw bandpass

connector to mounting platform.

The leveling ring is for fine adjustment.

If necessary adjust the magnetic grille leveling

ring with a screwdriver and install magnetic grille.

NOTE: See grille painting instructions.