Sonance ThinLIne Series Bedienungsanleitung

Determine the location of the 3” ex bracket and subwoofer.

Ensure there is adequate space to accommodate the

subwoofer and port tube within the 2 x 4 stud bay or joists,

allowing at least 7-9” from the front edge of the BPS6 TL

to the location of the ex bracket opening. (See Figure 1).

Box Contents

(1) Quickstart Guide

(1) Bandpass Subwoofer with port tube

(1) Cardboard mounting template

MOUNTING SCREWS & WASHERS:

(4) 5/16” x 3” lag screws

(4) 5/16” washers

BPS6 TL QUICKSTART GUIDE FOR USE WITH VISUAL

PERFORMANCE SERIES BANDPASS CONNECTORS

BANDPASS SUBWOOFER THINLINE (VP)

Place the subwoofer mounting template on the side of a

2 x 4 stud or joist and drill four 1/4” (6mm) holes through the

locations shown on the mounting template. (See Figure 2).

Hold the side of the BPS6 TL Subwoofer with the rubber

damping pad up against the side of the 2 x 4 stud and

install the four lag screws and washers to secure the

BPS6 TL Subwoofer in place. (See Figure 3).

7-9” (177-228mm)

BPS6 TL

Port Tube

Flex Bracket

NOTE: IF IT IS NOT POSSIBLE TO LOCATE THE BPS6 TL SUBWOOFER

7-9” AWAY FROM THE FLEX BRACKET OPENING, EXTRA HOSE

MATERIAL (UP TO 3”) MAY BE REMOVED. WHILE IT IS OKAY TO

SHORTEN THE HOSE, NEVER EXTEND THE HOSE LENGTH.

NOTE: DRILLING FROM THE INSIDE OF THE STUD BAY IS

RECOMMENDED TO ENSURE THAT THE HOLE LOCATIONS MATCH

THE SUBWOOFER SCREW LOCATIONS.

NOTE: BE SURE THAT THE SUBWOOFER TEMPLATE IS FLUSH WITH

THE EDGE OF THE STUD OR SLIGHTLY RECESSED.

Attach the 3” ex bracket to the 2 x 4 stud or joists in

the predetermined location. Check that the mounted

distance allows for the port tube to pass through the

bracket with at least 4 ribs of the tube exposed.

(See Figure 4).

Figure 1

Figure 2

Figure 3

Figure 4

Template

all features and specications are subject to change without notice. For the latest Sonance product specication information visit our website: www.sonance.com

SONANCE • 991 Calle Amanecer • San Clemente, CA 92673 USA • PHONE: (949) 492-7777 • FAX: (949) 361-5151 • Technical Support: (949) 492-7777 10.24.17

The BPS6 TL ships with a tether inserted into the end

of the port tube. Use the tether to guide the port tube

into the ex bracket. Loop and pull the tether all the

way until port tube lies rmly on the ex bracket.

Tie the tether into a knot. This process ensures that

other tradespersons won’t infringe on the port tube

assembly area. (See Figure 5).

BPS6 TL QUICKSTART GUIDE FOR USE WITH VISUAL PERFORMANCE SERIES BANDPASS CONNECTORS

Attach the four conductor speaker wire to the input

terminals; positive wires to red terminals and negative

wires to black terminals. Run a signal test using an

amplied program material for at least 60 seconds.

Secure the speaker wire to the zip tie attached to the

subwoofer cabinet to prevent accidental removal.

(See Figure 6).

After drywall and paint is complete, install bandpass

connector (sold separately; Sonance model

VPBPC3R TL SKU# 93334) to the port tube through

the ex bracket.

For Visual Performance bandpass connector

installation details visit www.sonance.com/

in-wall-in-ceiling/bps6-tl

33-7940

LEFT

BPS6TL

RIGHT

MADE IN CHINA

Included

zip tie

for wire

NOTE: PORT TUBE CONTAINS FOAM PLUG WITH A TETHER, MAKE

SURE PRESSURE LEVELS DON’T EXPEL THE FOAM PLUG AND TETHER.

Tether into ex

bracket loop

Foam

Figure 5

Figure 6

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sonance Subwoofer Handbücher

Sonance

Sonance BPS6 Bedienungsanleitung

Sonance

Sonance VP10SUB Bedienungsanleitung

Sonance

Sonance MS10SUB Bedienungsanleitung

Sonance

Sonance A800D Bedienungsanleitung

Sonance

Sonance i12 Bedienungsanleitung

Sonance

Sonance Cinema Series SUB 10-150 Bedienungsanleitung

Sonance

Sonance VP10SUB NC Bedienungsanleitung

Sonance

Sonance D8 Bedienungsanleitung

Sonance

Sonance LS47SAT Bedienungsanleitung

Sonance

Sonance LS10SUB Bedienungsanleitung

Sonance

Sonance BPS-1 Bedienungsanleitung

Sonance

Sonance Virtuoso A800D Bedienungsanleitung

Sonance

Sonance BPS-1 Bedienungsanleitung

Sonance

Sonance BPS6 Bedienungsanleitung

Sonance

Sonance LANDSCAPE SERIES HS10SUB Bedienungsanleitung

Sonance

Sonance BPS-1 Bedienungsanleitung

Sonance

Sonance Sonance Landscape Series LS12ESUB Bedienungsanleitung

Sonance

Sonance HS12T SUB Bedienungsanleitung

Sonance

Sonance BPS8 Bedienungsanleitung

Sonance

Sonance BPS6 TL Bedienungsanleitung

Sonance

Sonance Cinema Series SUB 12-250 Bedienungsanleitung

Sonance

Sonance The Sub Bedienungsanleitung

Sonance

Sonance LS12T SUB Bedienungsanleitung

Sonance

Sonance LS47SAT Bedienungsanleitung

Beliebte Subwoofer Handbücher anderer Marken

Sony

Sony XS-AW8 Bedienungsanleitung

Sony

Sony XS-L836 Bedienungsanleitung

B&C Speakers

B&C Speakers 15 HPL 76W Bedienungsanleitung

Velodyne

Velodyne DD-18+ Bedienungsanleitung

Hifonics

Hifonics HW-12 Kurzanleitung

Magnat Audio

Magnat Audio ADR 130 BP Bedienungsanleitung

Blitz

Blitz BZP106 Bedienungsanleitung

Technics

Technics SB-AS500 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-2 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-3 Bedienungsanleitung

Pyle Pro

Pyle Pro PYLE PRO PDW15125 Bedienungsanleitung

REL Acoustics

REL Acoustics Q Series Bedienungsanleitung

Pioneer

Pioneer Elite S-W1EX Bedienungsanleitung

L-Acoustics

L-Acoustics KIVA SB15M Kurzanleitung

B&C Speakers

B&C Speakers Woofer 12 HPL 76 Bedienungsanleitung

KEF

KEF KUBE 200 Bedienungsanleitung

Yamaha

Yamaha SW500 Bedienungsanleitung

Adam

Adam Sub15 Bedienungsanleitung