Sonic Alert SBB500SS Bedienungsanleitung
Sonic Alert
Sonic Boom Alarm Clock & Bed Shaker
Model SBB500SS
OPERATION INSTRUCTIONS
IMPORTANT –Please read these instructions carefully before use and retain for future
reference. See operating instructions on back.
-Use only the supplied adaptor to connect the unit.
Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture.
Before connecting to mains make sure that the requirements specified on the
apparatus corresponds to the available power supply i.e. AC120V 60Hz or AC230V
50Hz.
-- The ventilation should not be impeded by covering the ventilation openings with
items such as, newspaper, table cloth, curtains, etc;
-- No naked flame sources, such as lighted candles should be placed on the
apparatus.
-- It shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
-- Do not place the product in closed bookcases or racks without proper ventilation.
-- Where the mains plug is used as the disconnect device, the disconnect device
shall remain readily operable.
GENERAL DATA
Power Consumption: Adaptor AC9V~ 900MA)
UL listed transformer (Underwriters Laboratories) for USA
CE Approved transformer for Europe
Made in China
www.SonicAlert.com 1-800-566-3210 V/TTY
The Lightening flash and
arrowhead within the
triangle is a warning sign
alerting you of dangerous
voltage inside the product.
CAUTION:
TO REDUCE THE RISK
OF ELECTRICAL
SHOCK, DO NOT
REMOVE THE COVER
(OR BACK) FROM THE
PRODUCT. NO USER
SERVICEABLE PARTS
INSIDE. REFER
SERVICING TO YOUR
SONIC ALERT DEALER.
The exclamation mark
within the triangle is a
warning sign alerting you
of important instructions
accompanying the product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
-Attentionshould be drawn to the environmentak aspects of battery disposal.
-this indicating separate colletion for electrical ans electroinc equipment.
SONIC ALERT’S 1 YEAR LIMITED WARRANTY
The Sonic Boom Alarm Clock Model SBB500ss is warranted
Against manufacturing defects in materials and workmanship
For (1) year from the date of purchase. Within this period Sonic
Alert will repair or replace at our option the SBB500ss without
Charge for parts and labor. Simply send the SBB500ss (postpaid)
And a copy of your sales slip as proof of purchase to:
Sonic Alert Inc., 1050 E. Maple Road, Troy MI 48083, USA.
Sonic Alert
Made in China
Sonic Alert 1050 East Maple Rd. Troy, MI 48083
www.SonicAlert.com 1-800-566-3210 V/TTY
INSTRUCTIONS
ALARM CLOCK WITH BED SHAKER
MODEL SBB500SS
Features show on diagram above:
1) Alarm Indicator
2) PM Indicator
3) Snooze button
4) Volume Wheel
5) Alarm Set
6) Time Set Button
7) Alarm Off Button
8) Alarm Function Switch
9) Hour Button
10)Minute Button
11)Battery Compartment
12)Dimmer Switch
13) AC Adaptor
14)Tone Control Wheel
15)Vibrator Output
16)Flashing Light Display
17)Hour Format & Power
Cycle
Setting the correct time –
1) Press and hold the Time Button (6) at the same time press the Hour Button (9) to
advance the clock display rapidly until the hour is correct.
2) Press and hold the Time Button (6) at the same time press the Minute Button (10) to
advance the clcok display rapidly until the hour is correct.
A lighted dot (20 in the upper left of the clock display indicated the time is PM. Foe
AM time indication, there is not lighted dot.
Setting the alarm time –
1) Simply follow the instructions mentioned under “Setting the correct time“except that
you will have to press the Alarm Button (50 instead of the TIME Button.
2) Make sure the alarm time is correctly set for AM or PM, the lighted dot (2) indicated
PM. Be sure to release the HOUR and MIN set buttons before releasing the ALARM
button.
Waking to Alarm –
1) Set Function Switch (8) to choose „VIB“, „BUZZ“ or „VIB / BUZZ“.
2) Set desired volume (4) for buzzsound.
3) Set alarm wake time per instructions for setting alarm time above.
Battery Backup –
To use the battery backup, you can install a 9-volt alkaline battery in the back of the clock
located under the battery cover (11). Battery not included. Note the LED display will not
show during power failure but the clock will still be running and keeping proper time until the
power comes back.
NOTE: For the best results it is recommended that the battery be changed every 6-8 months.
If the clokc is not used for a while, it is recommended to remove the battery to aviod leakage.
Shutting Off Alarm –
Alarm can be shut off temporarily for the day or shut off permantently.
1) When the alarm goes off, simply press the AL off button (7) the alarm will shut itself
off for the day and come back on the next day at the same time if the alarm setting has
not changed.
2) To shut off the alarm permanently, slide function switch (8) to of positon. Alarm will
not come on until Function Switch (8) is set to „VIB“or „BUZZ“or
„VIB/BUZZ“position.
Snooze Operation–
SNOOZE button (3) –press after alarm has sounded. The alarm will be turned off for 9
minutes for extra sleep. The alarm will come back again after 9 minutes. You may repeat
many time up to 1 hour.
Alarm –
Set the alarm time you wish and slide the VIB/BUZZ/OFF (8) switch to the desired position.
Set to VIB for bed shaker and BUZZ for sound, or VIB/BUZZ for both.
Tone –
Adjust the tone by rotating the tone wheel (14) located on the right hand side just below the
volume wheel (4) untik you reachdesired level.
Volume –
To adjust the volume rotate the volume wheel (4) located on the upper right hand side.
Bed Shaker / Vibrator –Figure B
1) Attach the bed shaker jack to the bak of the clock at VIBRATOR input (15).
2) To turn vibrator slide functio switch (8) to VIB or VIB / BUZZ position.
3) Place vibrator under mattress or pillow.
AC 9V Power Input –
Attache the AC power supply input to the side of clock at AC9V IN (13) next to the
VIBRATOR input (15), smaller input of the two. Important: do not confuse AC inout with
vibrator input.
Hour Format and Power Cycle (17) –
Please select the appropriate settings for use. For USA please select 12/60Hz; for Europe
please select 24/50Hz; for UK please select 12/50Hz. Please note the incorrect selection of
power cycle will result in incorrect time.
Made in China
Sonic Alert 1050 East Maple Rd. Troy, MI 48083
www.SonicAlert.com 1-800-566-3210 V/TTY
Inhaltsverzeichnis
Andere Sonic Alert Wecker Handbücher
Sonic Alert
Sonic Alert SBA475ss Bedienungsanleitung
Sonic Alert
Sonic Alert SBT625ss Bedienungsanleitung
Sonic Alert
Sonic Alert SBP100 Bedienungsanleitung
Sonic Alert
Sonic Alert SBH400SS Bedienungsanleitung
Sonic Alert
Sonic Alert SONIC BOOM ALARM CLOCK SB300SS Bedienungsanleitung
Sonic Alert
Sonic Alert SBD375sseu Bedienungsanleitung
Sonic Alert
Sonic Alert SBH400SS Bedienungsanleitung
Sonic Alert
Sonic Alert Sonic Boom SBD375ss-v3 Bedienungsanleitung
Sonic Alert
Sonic Alert Boom Travel & Bed side SB200sseu Bedienungsanleitung
Sonic Alert
Sonic Alert SB200ss-v3 Bedienungsanleitung
Sonic Alert
Sonic Alert SBD375ss Bedienungsanleitung
Sonic Alert
Sonic Alert Sonic Boom SB1000 Bedienungsanleitung
Sonic Alert
Sonic Alert SBR350ss Bedienungsanleitung
Sonic Alert
Sonic Alert SBA475SS Bedienungsanleitung
Sonic Alert
Sonic Alert SONIC SHAKER SBP100 Bedienungsanleitung
Sonic Alert
Sonic Alert SB300ss Bedienungsanleitung
Sonic Alert
Sonic Alert SBS550BC Bedienungsanleitung
Sonic Alert
Sonic Alert SBD375SS Bedienungsanleitung
Sonic Alert
Sonic Alert SB750B Bedienungsanleitung
Sonic Alert
Sonic Alert SBJ525SS-v3 Bedienungsanleitung
