2
Important Safety Instruction
nts
?? Read Instructions –All the safety and operating instructions should be read before
operating this equipment. These instructions should be retained for future reference
?? Heed Warnings –All warnings on the equipment and in the operating instructions
should be adhered to. All instructions regarding care and operation of this equipment
should be followed.
?? Power Sources –Equipment should only be connected to the power supply specified
in the operating instructions or as marked on the equipment.
?? Grounding or Polarization –Take precautions that the equipment is properly
grounded. Take note that the power supply is fitted in the correct input jack ( marked
DC 12V ), and auxiliary units ( external siren and strobe light ) are fitted into the correct
external jack points.
?? Power-Cord Protection –Keep cable cords and plugs clear of other objects,
particularly at the point where they exit the equipment.
?? Cleaning –Clean the equipment by wiping with a soft cloth, ( do not use any abrasive
agents or water ).
?? Non-use Periods –Power cords should be unplugged from the outlet when left
unused for a long period of time.
?? Object and Liquid Entry –Take care not to drop objects or liquids on any part of the
equipment.
?? Damage Requiring Service –The alarm should be serviced by a qualified service
personnel when:
-The power-supply cord or the plug has been damaged,or
-Objects have fallen, or liquid has been spilled onto the equipment,or
-The equipment has been exposed to rain,or
-The equipment does not appear to operate normally or exhibits a marked
change in performance,or
-The equipment has been dropped, and/or the enclosure has been damaged.
?? Servicing –Do not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to a Qualified Distributor’s
Service Personnel.
?? System Maintenance –Under normal use your system requires virtually no
maintenance other than regular testing. It is recommended that you test your system
once a week.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE OR POWER ADAPTER TO WATER OR MOISTURE
IMPORTANT NOTE: IF YOU RETURN TO YOUR PREMISES AND FINDTHAT THE
ALARM IS IN PROGRESS, DO NOT ENTER, AS A FIRE OR AN INTRUDER MAY BE
PRESENT. GO TO A NEIGHBOR AND CONTACT THE RELEVANT LOCAL AUTHORITIES
FROM THERE.
