Sonifex CM-TB8 Bedienungsanleitung

CM-TB8 8 Channel Talkback

Control Unit

User Handbook

CM-TB8 8 Channel Talkback Control Unit User Handbook

CM-TB8 8 CHANNEL TALKBACK CONTROL UNIT

CM-TB8 8 CHANNEL TALKBACK CONTROL UNIT HANDBOOK

This handbook is for use with the following product:

CM-TB8 8 Channel Talkback Control Unit

©Sonifex Ltd, 2013

Revision 1.01, June 2013

Sonifex Ltd, 61, Station Road, Irthlingborough,

Northants, NN9 5QE, England.

Tel: +44 (0)1933 650 700

Fax: +44 (0)1933 650 726

Email: [email protected].uk

Website: http://www.sonifex.co.uk

Information in this document is subject to change without notice and does not represent a commitment on the part of

the vendor. Sonifex Ltd shall not be liable for any loss or damage whatsoever arising from the use of information or any

error contained in this manual.

No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical,

including photocopying, recording, information storage and retrieval systems, for any purpose other than the purchaser’s

personal use, without the express written permission of Sonifex Ltd. Unless otherwise noted, all names of companies,

products and persons contained herein are part of a completely fictitious adaptation and are designed solely to

document the use of Sonifex product.

CM-TB8 8 Channel Talkback Control Unit User Handbook c

CONTENTS

Warranty i

Warranty and Liability i

Unpacking the CM-TB8 iii

Returning the Warranty Card iii

Safety Information iv

Safety of Mains Operated Equipment iv

Voltage Setting Checks iv

Fuse Rating iv

Power Cable and Connection iv

Ordering the Correct Mains Lead v

Installation Information v

Atmosphere v

Electromagnetic Radiation v

WEEE & RoHS Directives - Sonifex Statement vi

Introduction 1

Front Panel Controls, Connections & Indicators 2

Headphone Output Connection 2

Microphone Input Connection 2

Headset Connection 2

Talk Level Indicators 2

Input Select Indicators 2

Multi-Function Rotary Control 2

Group Talk Button 3

Channel 1 to 8 Talk Buttons 4

Channel 1 to 8 IFB/4W Select Switches 4

Channel 1 to 8 Monitor Level Potentiometers 4

Loudspeaker Mute Button 5

Loudspeaker Dim Potentiometer 5

Monitor Level Potentiometer 5

Rear Panel Connections 6

4W IN Input Connections 6

TB OUT Output Connections 6

IFB A & B Programme Input Connections 6

MIC Output Connection 6

Remote Connections 6

Ethernet Connection 6

LS Output Connection 6

Line-Up Tone Mode 7

Remotes 8

Remotes 1 – Outputs 8

Remotes 2 – Inputs 8

Configuration Options 10

On-Board Conguration Mode 10

Embedded Web Server 11

Home Page 13

Network Settings Page 13

Display Settings Page 14

Talk Level Settings Page 15

Group Talk Settings Page 16

Load Settings Page 17

Save Settings Page 18

Update Page 18

dCM-TB8 8 Channel Talkback Control Unit User Handbook

CONTENTS & FIGURES

Configuration Option Defaults 20

Configuration Template Set 1 (read only) 20

Configuration Template Set 2 (read only) 20

Configuration Template Sets 3 to 6 21

Connection Example 22

Button Operation Reference 23

Connection Details 24

Headphone Output – ¼ inch (6.35mm) stereo jack socket 24

Microphone Input – Electronically balanced 3 pin female XLR-3 24

Headset – 5 pin female XLR-5 (microphone input is electronically balanced) 24

4-Wire Inputs – Transformer balanced 3 pin female XLR-3 24

Talkback Outputs – Transformer balanced 3 pin male XLR-3 24

IFB Inputs – Transformer balanced 3 pin female XLR-3 24

Microphone Output – Electronically balanced 3 pin male XLR-3 24

Remotes 1 – 15-way ‘D’-type socket 24

Remotes 2 – 15-way ‘D’-type socket 25

Loudspeaker Output – ¼ inch (6.35mm) jack socket 25

Technical Specification 26

CM-TB8T Introduction 28

Enabling the Telephone Interface 28

Making a Telephone Call 29

Direct Dialling 29

Dialling Using an External Telephone Handset 29

Receiving a Telephone Call 29

Handling a Connected Telephone Call 30

Ending a Telephone Call 30

Embedded Web Server 31

PSTN Settings Page 31

PSTN Telephone Interface Connection Details 32

Telephone Line – RJ11 Socket 32

Telephone Handset – RJ11 Socket 32

Figures

Fig A: Packing List iii

Fig B: Power Connections iv

Fig C: Mains Lead Table v

Fig 1-1: System Block Diagram. 1

Fig 2-1: CM-TB8 Front Panel. 2

Fig 3-1: CM-TB8 Rear Panel. 6

Fig 6-1: Home Page. 13

Fig 6-2: Network Settings Page. 13

Fig 6-3: Display Settings Page. 14

Fig 6-4: Microphone Settings Page. 14

Fig 6-5: Talk Level Settings Page. 15

Fig 6-6: Group Talk Settings Page. 16

Fig 6-7: Channel Settings Page. 16

Fig 6-8: Load Settings Page. 17

Fig 6-9: Save Settings Page. 18

Fig 6-10: Update Page. 18

Fig 8-1: Connection Example. 22

Fig 12-1: Channel Settings Page 28

Fig 12-2: PSTN Settings Page 31

CM-TB8 8 Channel Talkback Control Unit User Handbook i

Warranty

Warranty and Liability

Important: the purchaser is advised to read this clause

(a) The Company agrees to repair or (at its discretion) replace Goods which are found to

be defective (fair wear and tear excepted) and which are returned to the Company

within 12 months of the date of despatch provided that each of the following

are satisfied:

(i) notification of any defect is given to the Company immediately upon its

becoming apparent to the Purchaser;

(ii) the Goods have only been operated under normal operating conditions and

have only been subject to normal use (and in particular the Goods must have

been correctly connected and must not have been subject to high voltage or

to ionising radiation and must not have been used contrary to the Company’s

technical recommendations);

(iii) the Goods are returned to the Company’s premises at the Purchaser’s expense;

(iv) any Goods or parts of Goods replaced shall become the property of

the Company;

(v) no work whatsoever (other than normal and proper maintenance) has been

carried out to the Goods or any part of the Goods without the Company’s prior

written consent;

(vi) the defect has not arisen from a design made, furnished or specified by

the Purchaser;

(vii) the Goods have been assembled or incorporated into other goods only in

accordance with any instructions issued by the Company;

(viii) the defect has not arisen from a design modified by the Purchaser;

(ix) the defect has not arisen from an item manufactured by a person other than

the Company.

In respect of any item manufactured by a person other than the Company, the Purchaser

shall only be entitled to the benefit of any warranty or guarantee provided by such

manufacturer to the Company.

(b) In respect of computer software supplied by the Company the Company does not

warrant that the use of the software will be uninterrupted or error free.

(i) for death or personal injury to the extent that it results from the negligence of

the Company, its employees (whilst in the course of their employment) or its

agents (in the course of the agency);

WARRANTY

ii CM-TB8 8 Channel Talkback Control Unit User Handbook

(ii) for any breach by the Company of any statutory undertaking as to title, quiet

possession and freedom from encumbrance.

(d) Subject to conditions (a) and (c) from the time of despatch of the Goods from the

Company’s premises the Purchaser shall be responsible for any defect in the Goods

or loss, damage, nuisance or interference whatsoever consequential economic or

otherwise or wastage of material resulting from or caused by or to the Goods. In

particular the Company shall not be liable for any loss of profits or other economic

losses. The Company accordingly excludes all liability for the same.

(e) At the request and expense of the Purchaser the Company will test the Goods to

ascertain performance levels and provide a report of the results of that test. The

report will be accurate at the time of the test, to the best of the belief and knowledge

of the Company, and the Company accepts no liability in respect of its accuracy

beyond that set out in Condition (a).

(f) Subject to Condition (e) no representation, condition, warranty or other term,

express or implied (by statute or otherwise) is given by the Company that the Goods

are of any particular quality or standard or will enable the Purchaser to attain any

particular performance or result, or will be suitable for any particular purpose or use

under specific conditions or will provide any particular capacity, notwithstanding

that the requirement for such performance, result or capacity or that such particular

purpose or conditions may have been known (or ought to have been known) to the

Company, its employees or agents.

(g) (i) To the extent that the Company is held legally liable to the Purchaser for any

single breach of contract, tort, representation or other act or default, the

Company’s liability for the same shall not exceed the Price of the Goods.

(ii) The restriction of liability in Condition (g)(i) shall not apply to any liability

accepted by the Seller in Condition (c).

(h) Where the Goods are sold under a consumer transaction (as defined by the

Consumer Transactions (Restrictions on Statements) Order 1976) the statutory

rights of the Purchaser are not affected by these Conditions of Sale.

WARRANTY

CM-TB8 8 Channel Talkback Control Unit User Handbook iii

Unpacking the CM-TB8

The CM-TB8 is shipped with the following equipment. Please check your packaging to

ensure that you have all of the items below. If anything is missing, please contact the

supplier of your equipment immediately.

Item Quantity CM-TB8

CM-TB8 1

IEC mains lead fitted with moulded mains plug 1

Handbook and warranty card 1

Fig A: Packing List

Each CM-TB8 is shipped in protective packaging and should be inspected for damage

before use. Where an item is found to have transit damage, notify the carrier immediately

with all the relevant details of the shipment. Packing materials should be kept for

inspection and also for if the product needs to be returned.

Returning the Warranty Card

In order to register the date of purchase so that we can keep you informed of any design

improvements or modifications, it is important to complete the warranty registration

document that is enclosed and return it to Sonifex Ltd in the UK, or register online at

www.sonifex.co.uk/register

For your own records you should write down the serial number (which can be found on the

rear of the CM-TB8).

Serial Number ………………………………………

WARRANTY

iv CM-TB8 8 Channel Talkback Control Unit User Handbook

Safety Information

Safety of Mains Operated Equipment

This equipment has been designed to meet the safety regulations currently

advised in the country of purchase and it conforms to the safety regulations

specified by use of the CE Mark.

Warning : There are no user serviceable parts inside the equipment. If you should ever

need to look inside the unit, always disconnect the mains supply before removing the

equipment covers.

Voltage Setting Checks

Ensure that the machine operating voltage is correct for your mains power supply by

checking the box in which your CM-TB8 was supplied. The voltage is shown on the box

label. Please note that all CM-TB8s have a universal power supply.

Fuse Rating

The CM-TB8 is supplied with a single fuse in the live conducting path of the mains power

input. For reasons of safety it is important that the correct rating and type of fuse is

used. Incorrectly rated fuses could present a possible fire hazard, under equipment fault

conditions. The fuse rating for the CM-TB8 is:

Universal 85-264V operation - 2A 5x20mm SB

The active fuse is fitted on the outside rear panel of the unit.

Power Cable and Connection

An IEC power connector is supplied with the CM-TB8 which has a moulded plug attached

– this is a legal requirement. If no moulded plug has been supplied with your CM-TB8,

please contact your supplier, because an IEC connector is always supplied from the Sonifex

factory.

If for any reason, you need to use the CM-TB8 with a different power cable, you should use

the following wiring guidelines.

Wire Colour Connection

Green, or green and yellow Earth (E)

Blue, or black Neutral (N)

Brown, or red Live (L)

Fig B: Power Connections

SAFETY INFORMATION

CM-TB8 8 Channel Talkback Control Unit User Handbook v

Connect the equipment in accordance with the connection details and before applying

power to the unit, check that the machine has the correct operating voltage for your mains

power supply.

Important Note : The terminal marked on the rear panel must be earthed.

Ordering the Correct Mains Lead

When ordering a CM-TB8 from Sonifex, it is helpful if you can specify your required

operating voltage and mains lead. After the product code add:

UK, for 230V, UK 3 pin to IEC lead

EC, for 230V, European Schuko 2 pin to IEC lead

US, for 115V, 3 pin to IEC lead

AU for 230V, Australasian 3 pin to IEC lead

Fig C: Mains Lead Table

E.g. order CM-TB8 UK for a UK IEC lead to be supplied.

Installation Information

Atmosphere

The units should be installed in an area that is not subject to excessive temperature

variation (<0°C, >50°C), moisture, dust or vibration.

Electromagnetic Radiation

The cover is connected to earth by means of the fixing screws. It is essential to maintain

this earth ground connection to ensure a safe operating environment and provide

electromagnetic shielding.

SAFETY INFORMATION

vi CM-TB8 8 Channel Talkback Control Unit User Handbook

WEEE & RoHS Directives - Sonifex Statement

The Waste Electrical and Electronic Equipment (WEEE) Directive was agreed on

13 February 2003, along with the related Directive 2002/95/EC on Restrictions

of the use of certain Hazardous Substances in electrical and electronic

equipment (RoHS).

The Waste Electrical and Electronic Equipment Directive (WEEE) aims to minimise the

impacts of electrical and electronic equipment on the environment during their life times

and when they become waste. It applies to a huge spectrum of products. It encourages

and sets criteria for the collection, treatment, recycling and recovery of waste electrical and

electronic equipment. All products manufactured by Sonifex Ltd have the WEEE directive

label placed on the case. It gives a contact for individuals who are unsure about the correct

procedure when the product has reached its “end of use”.

Sonifex Ltd will be happy to give you information about local organisations that can

reprocess the products, or alternatively all products that have reached “end of use”can be

returned to Sonifex and will be reprocessed correctly free of charge.

Sonifex Ltd has phased out the use of certain hazardous substances identified in the

European Union’s Restriction of Hazardous Substances (RoHS) directive. The RoHS

directive limits the use of certain hazardous substances currently used in EEE manufacture,

including lead, mercury, cadmium, hexavalent chromium, and halide-containing

compounds PBB (polybrominated biphenyl) and PBDE (polybrominated diphenyl ether).

Elimination of these substances will result in more environmentally friendly recycling

of electronic equipment. For the products which Sonifex manufacture, the main area

where products were affected was in the use of lead for manufacturing and assembling

electronics circuit boards.

Sonifex Ltd practices lead-free (LF) manufacturing processes. LF solder is used on the

surface-mount PCB manufacturing processes and for hand soldering. The printed circuit

boards (PCBs) used are either gold plated, or immersion tin plated, both of which use no

lead. Historically the PCBs were hot air solder levelled (HASL) PCBs which used tin/lead

based solder.

The manufacturing processes include the assembly of purchased components from

various sources. Product is offered as RoHS compliant, or LF, only after sufficient evidence

is received from the component manufacturers that their components are RoHS compliant.

Sonifex Ltd relies solely on the distributor, or manufacturer, of the components for

identification of RoHS compliance. Thus whilst every effort is made to ensure compliance,

Sonifex Ltd makes no warranty, or certification, or declaration of compliance concerning

said components.

Sonifex Ltd defines “Lead Free”as pertaining to any product, which has been manufactured

by Sonifex Ltd using components which have been declared by the manufacturers as

“Lead Free”. All statements by Sonifex Ltd of RoHS compliance are based on component

manufacturer documentation.

WEEE & ROHS DIRECTIVE

Andere Handbücher für CM-TB8

Inhaltsverzeichnis

Andere Sonifex Steuereinheit Handbücher

Sonifex

Sonifex CM-TB8 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung