Product Guide
8
Changing the Sub’s room association
You can easily associate the Sub with a different Sonos speaker (Connect:Amp, Play:1, Play:3, Play:5,
Playbar, or ZP100).
If you are moving the Sub to a new room, first unplug the Sub, locate it on the floor in another room, and then
plug it back in. The status light on the side of the Sub will begin to flash. Once it lights solid again, you are
ready to proceed.
Using the Sonos app on a mobile device
1. Select > Settings > Room Settings.
2. Select the room that is currently associated with the Sonos Sub. It appears as Room (+Sub) in Room
Settings.
3. Select Remove Sub.
4. Choose one of the following settings:
• If you want to associate the Sub with a different Sonos speaker, select Choose Room for Sub and then
select another room.
• If you are not going to use the Sub right now, select Don’t use Sub. It will appear on Rooms as Sub
(unused) until you select it and associate it with another Sonos speaker.
Using the Sonos app on a Mac or PC
1. Select Manage > Settings (PC) or Sonos > Preferences (Mac).
2. Select Room Settings.
3. Select the room that is associated with the Sonos Sub. It appears as Room (+Sub)in Room Settings.
4. From the Basic tab, select Remove Sub.
5. Choose one of the following settings:
• If you want to associate the Sub with a different Sonos speaker, select Choose Room for Sub and then
select another room.
• If you are not going to use the Sub right now, select Don’t use Sub. It will appear in Rooms as Sub
(unused) until you select it and associate it with another Sonos speaker.
Got a new router?
If you purchase a new router or change your internet service provider (ISP), you’ll need to restart your Sonos
products after the router is installed.
Note: If you keep a Sonos product connected to your router and an ISP technician connects it to the new
router, then you’ll only need to restart your other Sonos products.
1. After the router is set up, disconnect the power cords from your Sonos products for at least 5 seconds.
2. Reconnect all the power cords—if you keep a Sonos product connected to your router, start with that one.
The speaker status light turns solid white on each product when the restart is complete.
If you don’t have a Sonos product connected to your router, you’ll need to change your network password
in the Sonos app.
