Sony Ericsson T630 Bedienungsanleitung

Sony Ericsson T630

User Guide

Table of Contents

Quick Application & Connectivity Guide..........................................................................................................3

Display Icons & Indicators...............................................................................................................................4

WAP Configuration..........................................................................................................................................4

MMS Configuration .........................................................................................................................................6

Email Configuration.........................................................................................................................................8

Modem Drivers & Internet Links....................................................................................................................10

This document is intended to serve as a user guide to help users in the setting up of internal features of the Sony

Ericsson T630 mobile phone. Furthermore, it also contains modem drivers and/or direction for finding them on the

Internet.

As a valued customer we provide you with this User Guide as a reference when setting up your phone and other

related equipment. You acknowledge that the information contained in this User Guide is provided by Sony Ericsson

or other suppliers. Call Australia nor any of its representatives has made nor makes any representation or warranty,

express or implied, as to the accuracy or completeness of the information in this User Guide and Call Australia may

but is under no obligation to notify you if it becomes aware of any inaccuracy, incompleteness or change in the

information contained in this User Guide. For accurate and up-to-date information we recommend you visit the Sony

Ericsson website links referred to in this document.

Quick Application & Connectivity Guide

Feature Supported (Yes/No)

Application related

GPRS Multislot Class (Specify) 4+1

Internal (Wireless Application Protocol) WAP Browser/Version 1.2.1

Over The Air Configuration (OTAC) of WAP settings Yes

Accepting calls while in WAP GPRS session

Indication is available when SMS is received while in WAP session Yes

Reading SMS while in WAP GPRS session Yes

Making Calls while in WAP GPRS session Yes

Sending SMS while in WAP GPRS session Yes

WAP inactivity linger timer set in GPRS Yes

Internal Email Client Yes

SMS over GPRS Supported but Off

Multimedia Messaging Service (MMS) Yes

Connectivity related

RS232 Cable Interface Yes

USB cable Yes

Infrared Yes

Bluetooth Yes

PPP Authentication

PAP Yes

CHAP Yes

MS-CHAP Yes

Operating Systems supported

Windows 98 / 98 SE / ME / NT Yes, not tested

Windows 2000 / XP Yes

Apple MAC Yes, not tested

Display Icons & Indicators

Display Icon / Indicator Notes

GPRS Attach Indication

Top Right hand corner has the signal strength bars with a turquoise

triangle above it. When the triangle becomes darker (it starts out

faint), the GPRS attach is complete.

Launching the WAP Browser

Move the joystick right to enter main menu.

Press 2 or Scroll up until Internet services is displayed (menu 2).

Press Select.

During browsing the browser menu can be accessed by pressing the

key below the YES key.

The top right hand side button will also launch the browser

Indication when a Packet Session (PDP) is

launched for WAP or PPP

The messages Loading and then Connecting are seen on the

screen.

In the idle screen (which is not visible during an active WAP session,

so the WAP session needs to be suspended) a little world icon is

displayed to indicate that a PDP context has been launched

Indications when retrieving a WAP Link An hourglass symbol will appear in the top right hand corner of the

browser while the page is being downloaded.

Exiting WAP Browser Press the More button (above the C button) and select Exit WAP.

WAP Configuration

General information about WAP configuration.

The Sony Ericsson configuration splits the bearer data from the WAP settings. Bearer data is set by selecting

Connectivity ÆData Comm ÆData accounts from the main menu and WAP Browser and Proxy settings are in

Connectivity ÆWAP options.

General Parameters for WAP configuration.

As the T630 (and T610) support WAP 1.2.1 the following general parameters apply:

Handsets Using WAP 1.2.1

Bearer Type and Access Point name Bearer: GPRS

APN: telstra.wap.mnc001.mcc505.gprs

Proxy/Gateway Information

Use/Enable Proxy: Yes

Proxy Type: WAP

Proxy Address: 10.1.1.150

Port: 9203

Default Browser Homepage http://wap.mdata.net.au/home

STEP A: The bearer settings - Telstra.gprs data account configuration.

1. From the idle screen move the joystick right to enter main menu.

a. Press *key or select the Connectivity icon from the main menu (bottom left).

b. Press 7or select Data comm. from the list.

c. Press 1or select Data accounts from the list.

2. Here, the user needs to create two separate accounts, a GPRS account and a GSM account.

a. To create a GPRS account called Telstra.gprs:

i. Select New account and press Add key if necessary.

ii. In the Account type menu, GPRS data.

iii. In the New account window, enter account name: Telstra.gprs.

iv. Under New GPRS data enter the following:

1. APN: telstra.wap.mnc001.mcc505.gprs, press OK button.

2. User ID: (leave blank).

3. Password: (leave blank).

4. Press Save button.

STEP B: The Browser & Proxy settings.

1. From the idle screen (to get back to the idle screen, keep pressing the back button) move the joystick right to enter

main menu.

a. Press *key or select Connectivity icon from the main menu (bottom left).

b. Press 4or select WAP options from the list.

c. Press 1or select WAP profiles from the list.

2. Select New profile and press Add key if necessary.

a. Under New profile enter the following:

i. Name: (any name) press OK button.

ii. Select Connect using and select Telstra.gprs.

iii. Select IP address and enter 10.1.1.150 and press OK.

iv. Press Save button, the phone will display a new profile was created and return to the WAP profiles menu.

b. Select the profile created above eg: (any name)

i. Press the Edit button.

ii. Press 4or select Advanced.

iii. Press 1or select Change homepage.

1. Under Change homepage enter Name: DEFAULT_HOMEPAGE, press OK.

2. Enter address: eg. http://wap.mdata.net.au/home, press OK.

i. Press back button to return to Telstra WAP profile.

3. The following settings were previously set or are left on default (you may skip this):

a. IP Address: 10.1.1.150.

b. Security: On or off; on will enable security (recommended).

c. Advanced.

i. <User ID> (blank).

ii. <Password> (blank).

STEP C: Selecting the Default WAP Profile AnyName.

1. From the idle screen move the joystick right to enter main menu.

a. Press *key or select <Connectivity> icon from the main menu (bottom left).

b. Press 4or select <WAP options> from the list.

2. Select WAP Profiles.

3. Select AnyName.

4. A long press of the NO key will get you back to idle screen.

STEP D: WAP connection using AnyName WAP Profile.

1. From the idle screen move the joystick right to enter main menu.

2. Press the 2key or select the Connectivity icon from the main menu (top middle).

a. The phone will launch its WAP browser (you will see a loading message).

3. Press the More button.

4. Select AnyName.

MMS configuration

General information about MMS configuration for Sony Ericsson

The Sony Ericsson configuration for the MMSC address to use and all user options are under the Messages menu.

However, to specify the bearer and the proxy to use a profile like the one defined in the WAP settings, which is also

required for MMS, are options under the connectivity menu.

General parameters for MMS configuration.

As the T630 (and T610) support WAP 1.2.1 the following general parameters apply:

Handsets Using WAP 1.2.1

Bearer Type and Access Point name Bearer: GPRS

APN: telstra.mms.mnc001.mcc505.gprs

Proxy/Gateway Information

Use/Enable Proxy: Yes

Proxy Type: WAP

Proxy Address: 10.1.1.155

Port: 9201

MMSC Address/Homepage http://mmsc.telstra.com:8002

Creating a data account for MMS.

1. From the idle screen, move the joystick right to enter the main menu.

a. Press *key or select the Connectivity icon from the main menu (bottom left).

b. Press 7or select Data comm. from the list.

c. Press 1or select Data accounts from the list.

2. To create a GPRS account called Telstra.mms.

a. Select New account and press the Add key if necessary.

b. In the Account type menu, select GPRS data.

c. In the New account window, enter account name: Telstra.mms.

d. Under New GSM data enter the following:

i. APN: (telstra.mms.mnc001.mcc505.gprs).

ii. User ID: (leave blank).

iii. Password: (leave blank).

iv. Press Save button.

Creating a Telstra.MMS Profile Setup.

1. From the idle screen move the joystick right to enter main menu.

a. Press *key or select the Connectivity icon from the main menu (bottom left).

b. Press 4or select WAP Options from the list.

c. Select New Profile.

2. In New profile enter the (suggested) name Telstra.MMS and press OK.

a. Select Connect using and highlight Telstra.mms and press Select.

b. In IP address enter 10.1.1.155.

c. Select Save? and press YES, the phone will then display that a new profile was created and return to the

WAP profiles menu.

3. Now, highlight the profile created above eg. Telstra.MMS and press Edit.

4. Press Edit.

5. Select 4 Advanced.

6. <1 Cng homepage>.

a. Chg homepage - It is better to call the homepage title the same as the profile as this is what is shown when

the profile is selected, so enter Telstra.

7. Enter address: eg. http://wap.telstra.com/mms

a. <3 User ID> (leave blank).

b. <4 Password> (leave blank).

c. <5 Security>.

d. <4 Password> (leave blank).

e. <5 Security> This setting depends on whether access via a secure port or non-secure port is required. The

default for Telstra.MMS profile is Off.

f. <6 Show pictures> Select On.

Setting up MMS on the T610/T630

1. Enter the main menu list by moving the joystick right.

a. Select <5 Messages> menu.

b. Select <2 Picture>.

c. Select <6 Options>.

i. Select <1 Validity period> and select Maximum.

ii. Select <2 Read report> and check that Off is selected.

iii. Select <3 Delivery report> and check that Off is selected.

iv. Select <6 Message Server> and enter the MMSC IP address as proposed http://mmsc.telstra.com:8002

v. Select <7 WAP profile>.

vi. Select <1 Select>.

vii. Select Telstra.mms.

Email configuration

General information about email configuration.

Email is often treated as a messages application and most phones will have it under the Messages menu.

Email setup is generally network independent except for specifying the GPRS bearer (or APN) to use. Generally

speaking it is recommended to use the same bearer specified for the WAP browser, in this case

telstra.wap.mnc001.mcc505.gprs, but the APN mdata.net.au will also work as it provides the necessary bearer and

ISP access to connect to the users email server.

Sony Ericsson website based email configuration.

You can also set up an email account on the T610/T630 from the Sony Ericsson website

(http://www.sonyericsson.com/). To set up an email account, click on the Global Product Support link off the main

site and follow the instructions to the Email configurator. Alternatively, you may enter the details manually. Call

Australia use Telstra for carriage, so for the bearer, Telstra’s operator settings are to be selected.

Email Manual Setup configuration.

1. Enter the main menu list by moving the joystick right.

i. Select <5 Messaging> menu.

ii. Select <4 Email>.

iii. Select <7 Options>.

2. Select Edit account - Here, the user can enter the details of email accounts.

3. Select New account and press Add.

4. Enter the email account name eg. Yahoo.

i. In <1 Connect using>, select the data account to use eg: Telstra.gprs for GPRS bearer.

ii. In <2 Protocol>, select POP 3 and press YES.

iii. In <3 Inc. server>, enter the POP3 server details of your account. Eg. pop.mail.yahoo.com for Yahoo or

mail.bigpond.com for Telstra.

iv. In <4 Incoming port>, enter the POP3 port details. Eg. 110.

v. In <5 Mailbox>, enter the mailbox name of your email account.

vi. In <6 Password>, enter the password of your email account.

vii. In <7 Outgoing server>, enter the SMTP server details of your account, usually the same as the POP3 server.

viii. In <8 Outgoing port>, enter the SMTP port details. Eg. 25.

ix. In <9 Email address>, enter your full email address. Eg. [email protected]

x. In <0 Download>, you can select either.

1. Header+text (to receive the full email before reading).

2. Header only (to receive the subject, and download the rest as needed).

xi. In <From name:>, enter the name you would like displayed in received email (optional). E.g. Your Name.

xii. In <Signature>, you can select one of the following:

1. No signature.

2. Use business card.

xiii. In <Copy outgoing>, you can select one of the following:

1. On, you will prompted to enter the email address.

2. Off, to turn it off (default).

a. In <Check interval>, you can select the an interval for automatic email checking from one of the following:

i. Off, 5 min, 30 min, 60 min, 2 hours, 3 hours, 4 hours, 12 hours.

5. Save your settings.

Checking for email.

1. Enter the main menu list by moving the joystick right.

a. Select <5 Messaging> menu.

b. Select <4 E-mail>.

c. Select <1 Send & receive> to check for new incoming email or send outgoing email.

d. Select <Inbox> to check for received email. Note: nothing will be displayed if there is no email in the users

email inbox.

Modem Drivers & Internet Links

To use the T610 or T630 as a modem via Infrared, Bluetooth or Cable, it is best to download the latest drivers or

Synchronisation Software from the Sony Ericsson website. There is product support software for every model.

The website address is http://www.sonyericsson.com. Specifically, the T630 drivers can be downloaded from

http://www.sonyericsson.com/spg.jsp?cc=au&lc=en&ver=4000&template=ps1_1_3_2&zone=ps&lm=ps1_1&pid=10055

Setting up Internet data accounts for use in Microsoft Dial-up Networking.

GPRS handsets that support PC connectivity will often be supplied with CD Wizard software to assist you with setting

up their GPRS Internet connections. The Main parameter that will be required during that setup is the GPRS APN for

Internet access. This is mdata.net.au. Where CD Wizard is not available, it is preferable to download the latest

software for a GPRS product from the vendors website or refer to the user manual for setup. To be able to provide

general support for Internet setup, the concept of APN and context ID (the numbers actually dialled in a Dial-up

Networking session) are explained below. Specific AT commands for checking the defined context IDs recognised by

a GPRS terminal are also provided although it is NOT expected that the end user will need this information.

What is an APN?

An APN (Application Point Name) is a GPRS specific parameter that points to an application you want to use. The

APN entered by you has to match what you have subscribed to in the network. For wireless Internet access you will

be provisioned in the network with the mdata.net.au APN. This APN effectively provides ISP access over GPRS. If you

are also provisioned for WAP, then you will also be provisioned with the telstra.wap.mnc001.mcc505.gprs. APN that

also provides ISP access, but is mainly used for proxying through the WAP gateways. So given that mdata.net.au

provides ISP access over GPRS, if you require access to the Internet using your laptops or PDAs, you can configure

your Dial-up Networking to use that APN. This is done via the Context ID.

To make sure tools such as Dial-up Network are effectively dialling the correct APN, a local phone context is

configured and given a context identity (CID). This CID refers to an APN that is sent to the network. The CID is only a

local identification number for an APN at the mobile terminal. Each CID can be configured via recognised “at”

commands or via the menu of some handsets. The following Section explains the *99# dial up or *99***CID# dial up

sequence and how to set it up via AT commands if the CD wizard is not available.

APN to CID mapping for manual setup of Dial-up Networking.

The APN to CID mapping is defined via a special GPRS command called “cgdcont”. In Microsoft’s operating systems,

that definition can be carried out as an extra dial string in setting up Dial-up Networking. This can also be done

directly via AT commands from a terminal emulator. Follow the below instructions:

Andere Handbücher für T630

Inhaltsverzeichnis

Andere Sony Ericsson Handy Handbücher

Sony Ericsson

Sony Ericsson XPERIA mini Service-Handbuch

Sony Ericsson

Sony Ericsson Walkman W950 Kurzanleitung

Sony Ericsson

Sony Ericsson W800i Kurzanleitung

Sony Ericsson

Sony Ericsson K530 Bedienungsanleitung

Sony Ericsson

Sony Ericsson Xperia X10 mini Installationsanleitung

Sony Ericsson

Sony Ericsson Z1010 Bedienungsanleitung

Sony Ericsson

Sony Ericsson Walkman W610i Bedienungsanleitung

Sony Ericsson

Sony Ericsson Z750 Bedienungsanleitung

Sony Ericsson

Sony Ericsson F305 Bedienungsanleitung

Sony Ericsson

Sony Ericsson Z712 Bedienungsanleitung

Sony Ericsson

Sony Ericsson Z558i Handbuch

Sony Ericsson

Sony Ericsson W950i Bedienungsanleitung

Sony Ericsson

Sony Ericsson U1i Bedienungsanleitung

Sony Ericsson

Sony Ericsson CYBER-SHOT C510 Bedienungsanleitung

Sony Ericsson

Sony Ericsson W850 Bedienungsanleitung

Sony Ericsson

Sony Ericsson T230c Bedienungsanleitung

Sony Ericsson

Sony Ericsson Z600 Bedienungsanleitung

Sony Ericsson

Sony Ericsson J300 Bedienungsanleitung

Sony Ericsson

Sony Ericsson P910i Bedienungsanleitung

Sony Ericsson

Sony Ericsson C702 Bedienungsanleitung

Sony Ericsson

Sony Ericsson K300i Bedienungsanleitung

Sony Ericsson

Sony Ericsson Spiro Bedienungsanleitung

Sony Ericsson

Sony Ericsson MT11i Kurzanleitung

Sony Ericsson

Sony Ericsson XPERIA X8 Betriebsanleitung

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung