Sony KV-BT21 Bedienungsanleitung

Sony KV-BT21N50 Group A18 (GB)_4-098-311-11 (1)
Trinitron Color TV
Operating Instructions
• Before operating the unit, please read this manual thoroughly and
retain it for future reference.
KV-BT21
KV-BM14
© 2003 Sony Corporation
4-098-311-11 (1)
N50
N40
GB
01GB01COV-PHI.p65 8/9/03, 11:58 AM1
Black

2
Sony KV-BT21N50 Group A18 (GB)_4-098-311-11 (1)
Do not place any objects on the TV. The apparatus
shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 110-240 V AC.
• Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries from the
remote if you are not going to use it for several days. If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.
Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are present
inside the TV. Refer servicing and disposal of the
TV to qualified personnel.
Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may be
subject to excessive dust, heat, moisture or
vibrations.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such as a
bookcase or built-in cabinet.
For children’s safety, do not leave children alone
with the TV. Do not allow children to climb onto it.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals to
clean the TV. Do not attach anything (e.g., adhesive
tape, cellophane tape, glue) on the painted cabinet of
the TV. Do not scratch the picture tube.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
01GB02WAR-PHI.p65 8/9/03, 12:05 PM2
Black

3
Sony KV-BT21N50 Group A18 (GB)_4-098-311-11 (1)
Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
To prevent fire or shock hazard, do not expose the
TV to rain or moisture.
01GB02WAR-PHI.p65 8/9/03, 12:05 PM3
Black

4
Sony KV-BT21N50 Group A18 (GB)_4-098-311-11 (1)
xSecuring the TV
BKV-BT21N50/BT21N40 only
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
20 mm
3.8 mm
screws clamps band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
or
01GB02WAR-PHI.p65 8/9/03, 12:05 PM4
Black

5
Sony KV-BT21N50 Group A18 (GB)_4-098-311-11 (1)
Additional Information
Connecting optional components ... 20
Troubleshooting ................................. 21
Specifications ...................... Back cover
Table of Contents
Installation
Getting Started ..................................... 6
Setting up your TV
(“Initial Setup”) .................................... 7
Overview of Controls
TV top control, front and
rear panels............................................. 8
Using the remote control and
basic functions ...................................... 9
Menu Adjustment
Introducing the menu system .......... 11
Changing the “Video” setting .......... 14
Changing the “Audio” setting ......... 15
Changing the “Channel Setup”
setting .................................................. 16
Changing the “Channel Block”
setting .................................................. 17
Changing the “Timer” setting .......... 18
Changing the “Setup” setting .......... 19
GB
01GB03TOC-PHI.p65 8/9/03, 12:08 PM5
Black

6Installation
Sony KV-BT21N50 Group A18 (GB)_4-098-311-11 (1)
Installation
xGetting Started
b
b
1
Step 1
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
Step 2
Step 3
Step 4
Set up the TV by following the instructions of the
“Initial Setup” menu (see page 7).
Plug in the power cord, then press !on the TV to
turn it on.
Note
• The 1(standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tip
• You can also connect your TV to other optional components
(see page 20).
01GB04INS-PHI.p65 8/9/03, 12:09 PM6
Black

7
Installation
Installation
Sony KV-BT21N50 Group A18 (GB)_4-098-311-11 (1)
x
Setting up your TV
(“Initial Setup”)
When you turn on your TV for the first time, the “Initial Setup” menu will appear.
You may change the menu language and preset the TV channels automatically using
the buttons on the top control panel.
Tip
• The MENU, and V/v/B/b buttons on the remote control can also be used for the
operations below.
1Press VOLUME +/– to select the desired
menu language, then press TV/VIDEO.
The selected menu language appears.
2Press VOLUME +/– to select “Yes”, then
press TV/VIDEO to preset the channels
automatically or select “No” to skip
automatic channel presetting.
Once you select “Yes”, your TV will start
searching for all the available channels.
If the message “No channel found. Please
connect cable/antenna.” appears, check your
TV connections, then press TV/VIDEO.
3Press VOLUME +/– to select “No”, then
press TV/VIDEO. This menu will not appear
again the next time you turn on the TV by
pressing !.
To allow this menu to appear again, select
“Yes”, then press TV/VIDEO.
Tips
• You can immediately go to the end of the ”Initial Setup” menu by pressing MENU.
• You can also set up your TV by pressing the MENU button on the top control panel for about
five seconds or using the menu system (see page 11).
Initial Setup
Language:
English
Initial Setup
First please connect
cable/ antenna
Start Auto Program now?
Yes
No
Initial Setup
Display this menu next time?
Yes
No
01GB04INS-PHI.p65 8/9/03, 12:09 PM7
Black

8Overview of Controls
Sony KV-BT21N50 Group A18 (GB)_4-098-311-11 (1)
Overview of Controls
qd qs qd
32
5
L
R
(MONO)
L
R
(MONO) (MONO)
(MONO)
432
5
2
qs
CHANNEL POWER
MENU TV/VIDEO VOLUME
089 76
VIDEO 1 IN
MONITOR OUT
VIDEO 1 IN
MONITOR OUT
VIDEO VIDEO VIDEO
AUDIO
AUDIOAUDIO
VIDEO
AUDIO
qaqa
41
1
LR
VIDEO 2 INPUT
VIDEO
AUDIO
(MONO)
VIDEO 2 INPUT
VIDEO AUDIO
(MONO)
(MONO)
TV front
panel
TV rear panel
xTV top control, front and rear panels
TV top control panel
Button/Terminal Function Page
1!Turn off or turn on the TV. 6
2Remote control sensor. –
3Wake Up indicator. 18
31Standby indicator. 6
4iHeadphone jack. –
5VIDEO 2 INPUT Video input terminal 2. 20
6POWER Turn off temporarily or turn on the TV. –
7CHANNEL +/– Select channel number. –
8VOLUME +/– Adjust volume. –
9TV/VIDEO Select TV or video input. 20
Menu operations
8 VOLUME +/– Select and adjust items. –
9 TV/VIDEO Confirm selected items. –
0MENU Display or cancel the menu. –
qa 8Antenna input terminal. 20
qs MONITOR OUT Monitor output terminal. 20
qd VIDEO 1 IN Video input terminal 1. 20
KV-BT21N50 KV-BT21N40/BM14N40
KV-BT21N40/BM14N40
The earphone jack will be labeled as for KV-BM14 only.
$
KV-BT21N50
01GB04INS-PHI.p65 8/9/03, 12:09 PM8
Black

9
Overview of Controls
Overview of Controls
Sony KV-BT21N50 Group A18 (GB)_4-098-311-11 (1)
xUsing the remote control and basic
functions
TV
123
46
789
0
5
MENU
MUTING DISPLAY
POWER
TV/VIDEOMTS/SAP
PICTURE
MODE
SOUND
MODE
SLEEP
RESET
CH
VOL
JUMP ENT
1
2
4
9
7
3
5
qj
qf
qd
qg
qh
0
qs
qk
qa
8
6
continue
Button Description Page
1POWER Turn off temporarily or turn on the TV. –
2TV/VIDEO Select TV or video input. 20
30–9 Input numbers. –
4ENT Confirm input numbers. –
5CH +/– Select channel number. –
6VOL +/– Adjust volume. –
0MUTING
Mute the sound. –
qa DISPLAY Display on-screen information. –
qd JUMP Jump to previous channel number. –
01GB04INS-PHI.p65 8/9/03, 12:09 PM9
Black

10 Overview of Controls
Sony KV-BT21N50 Group A18 (GB)_4-098-311-11 (1)
continued
Button Description Page
qf PICTURE MODE Select picture mode options: –
“Vivid” (contrast and sharp pictures), “Standard”
(standard pictures), “Movie” (finely detailed
pictures), “Sports” (bright pictures).
qg SOUND MODE Select sound mode options: –
(KV-BT21N50 only) “Movie” (low and high tones), “News” (vocals),
“Soft” (soft, natural and relaxing sounds),
“Standard” (standard flat sounds).
qh Select audio effect mode options: –
(KV-BT21N50 only) “Effect Off”, “Simulated” (stereo-like monaural
sound), “Surround”.
qk RESET Set TV to factory setting while adjusting items in an –
on-screen menu.
Menu operations
7MENU Display or cancel the menu. 13
8Confirm selected items. 13
qj V, v, B, b Select and adjust items. 13
Timer operations
9SLEEP Set TV to turn off automatically. –
Stereo/bilingual operations
qs MTS/SAP Not function for your TV. –
01GB04INS-PHI.p65 8/9/03, 12:09 PM10
Black
Andere Handbücher für KV-BT21
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Sony Farbfernseher Handbücher





















