Sony SPP-A974 Bedienungsanleitung
3-867-315-21 (1)
©1999 by Sony Corporation
FR
Operating Instructions
Mode d‘emploi
SPP-A974
US
Cordless
Telephone
with Answering System
2US
Caution: Users should not attempt to
make such connections themselves, but
should contact the appropriate electric
inspection authority, or electrician, as
appropriate.
NOTICE: The Ringer Equivalence
Number (REN) assigned to each
terminal device provides an indication
of the maximum number of terminal
allowed to be connected to a telephone
interface. The termination on an
interface may consist of any
combination of devices subject only to
the requirement that the sum of the
Ringer Equivalence Number of all the
devices does not exceed 5.
IMPORTANT INSTRUCTION TO
USERS
Your model (SPP-A974) has been
approved by the Industry Canada.
Note
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference, including
interference that may cause undesired
operation of the device.
Privacy of communications may not be
ensured when using this telephone.
DIGITAL SECURITY CODE
Your SPP-A974 has been assigned a
permanent and unique digital security
code out of possible 16.8 million codes.
WARNING
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
To avoid electrical shock, do not open
the cabinet. Refer servicing to
qualified personnel only.
INDUSTRY CANADA NOTICE
NOTICE: The Industry Canada label
identifies certified equipment. This
certification means that the equipment
meets certain telecommunications
network protective, operational and
safety requirements as prescribed in the
appropriate Terminal Equipment
Technical Requirements document(s).
The Department does not guarantee the
equipment will operate to the user’s
satisfaction.
Before installing this equipment, users
should ensure that it is permissible to be
connected to the facilities of the local
telecommunications company. The
equipment must also be installed using
an acceptable method of connection.
The customer should be aware that
compliance with the above conditions
may not prevent degradation of service
in some situations.
Repairs to certified equipment should be
coordinated by a representative
designated by the supplier. Any repairs
or alterations made by the user to this
equipment, or equipment malfunctions
may give the telecommunications
company cause to request the user to
disconnect the equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe system, if present, are
connected together. This precaution may
be particularly important in rural areas.
3US
Table of contents
Table of contents
Getting Started
4 Read this first
5 Step 1: Checking the package
contents
6Step 2: Setting up the base unit
9 Step 3: Preparing the battery
pack
12 Step 4: Entering the area code
15 Identifying the parts
Basics
18 Making calls
19 Redialing
20 Receiving calls
Telephone Features
22 Phone Directory
22 Storing phone numbers and
names
24 Changing a stored name and/
or phone number
25 Erasing a memory location
25 Making calls from the Phone
Directory
26 Setting the ringer type
26 Turning off the ringer of the
handset
27 Paging
Answering Machine
Features
28 Setting up the answering
machine
28 Setting the time and day of
the week
29 Recording the greeting
31 Setting the number of rings
32 Setting the audible message
alert
33 Turning on the answering
function
34 Playing back messages
35 Adjusting the speaker volume
35 Erasing messages
36 Selecting the Announcement
Only Mode
37 Screening calls
37 Turning on/off the screening
calls function
38 Recording a memo message
39 Operating from an outside phone
39 Setting the remote ID code
(security code)
40 Picking up new messages
Caller ID Features
41 Understanding the Caller ID
service
41 When you receive a call
42 Looking at the Caller ID list
42 Viewing the Caller ID list
43 Erasing data from the Caller
ID list
45 Using the Caller ID list
45 Calling back a number from
the Caller ID list
46 Storing a number of the Caller
ID list into the Phone
Directory
47 To change the number of
digits of the phone number
49 Using “Caller ID with Visual Call
Waiting” service
Additional Information
50 Mounting the base unit on a wall
51 Notes on power sources
51 Maintenance
52 Troubleshooting
55 Specifications
56 Index
US
Getting Started
4US
Getting Started
Base unit
Read this first
Before you use your phone, you must first set it up. Here’s a quick way
to set up your phone: Steps 1, 2, 3 and 4.
Step 2 (pages 6 to 8)
Next, you need to do three things to set
up the base unit, including finding the
best location for the base unit.
Step 3 (pages 9 to 10)
Then, insert the battery pack into the
handset and charge it for more than 12
hours.
Step 4 (pages 12 to 14)
Finally, enter the area code to use the
Caller ID service.
First, unpack the phone and the supplied
accessories.
Step 1 (page 5)
That’s it!
Handset
Getting Started
5US
Getting Started
Telephone line cords (2)
HandsetAC power adaptor (AC-T128)
Wall bracket for base unit
Base unit
Rechargeable battery
pack (BP-T23)
Step 1
Checking the package contents
Make sure you have received the following items in the package.
If anything is missing, contact your local Sony dealer.
Getting Started
6US
Step 2
Away from television
sets and other
electronic equipment
Away from a microwave
oven
Away from excessive
moisture, extremely low
temperatures, dust,
mechanical vibration, or
shock
Away from a personal
computer
Away from another
cordless telephone
Near a central location
and on a level surface
Away from heat sources, such as radiators,
airducts, and sunlight
Away from noise sources such as a window
by a street with heavy traffic
CAUTION: • Should you experience intermittent loss of audio during a conversation, try
moving closer to the base or move base unit away from other noise sources.
• The cordless telephone operates at a frequency that may cause interference to
nearby TVs and VCRs; the base unit should not be placed near or on the top of
a TV or VCR; and, if interference is experienced, moving the cordless telephone
farther away from the TV or VCR will often reduce or eliminate the
interference.
Setting up the base unit
Do the following steps:
• Choose the best location
• Connect the base unit
• Choose the dialing mode
Choose the best location
Where you place the base unit affects the reception quality of the
handset.
Getting Started
7US
Getting Started
continued
1Connect the telephone line cord
to the LINE jack and to a
telephone outlet.
2Connect the AC power adaptor
to the DC IN 9V jack and to an
AC outlet.
3Raise the antenna. Make sure it
points towards the ceiling.
Connect the base unit
If you want to hang the base unit on the wall, see page 50.
Hook the cord.
To LINE
3
To DC IN 9V
To an AC outlet
To the
telephone outlet
Telephone line cord
(supplied)
1
AC power adaptor
(supplied AC-T128)
2
Getting Started
8US
Notes
• Use only the supplied AC-T128 AC power adaptor.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power
supply.
• Place the base unit close to the AC outlet so that you
can unplug the AC power adaptor easily.
Tip
If your telephone outlet is not modular, contact your
telephone service company for assistance.
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
Depending on your dialing system, set the DIAL MODE switch as
follows:
If your dialing system is Set the switch to
Tone TONE
Pulse PULSE
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to TONE.
If the call connects, leave the switch as is; otherwise, set to PULSE.
Polarity of the plug
Step 2: Setting up the base unit (continued)
Modular
–
+
DIAL MODE switch
Getting Started
9US
Getting Started
Preparing the battery pack
Charge the battery pack for more than 12 hours before you start using
your phone.
1Slide open the battery
compartment lid of the handset.
2Insert the battery pack (with
contacts facing down) into the
battery compartment.
3Close the battery compartment
lid.
4Place the handset on the base
unit.
You can place it with either side
facing up.
The CHARGE lamp lights up
when the handset is properly
seated on the charge terminals
of the base unit. Charge the
battery pack for more than 12
hours so that the battery is fully
charged. The CHARGE lamp
remains lit even after charging
is completed.
continued
Step 3
CHARGE lamp
BP-T23
Getting Started
10US
Battery duration
A fully charged battery pack lasts for about:
• Approx. 6 hours when you use the handset continuously
• Approx. 7 days when the handset is in standby mode.
Notes
• The battery pack will gradually discharge over a long period of time, even
when not in use.
• If you leave the battery pack in the handset without charging it, the battery
pack will be completely discharged.
It may require several times of charging to recover to its full capacity.
To obtain the best performance from the battery
Do not place the handset on the base unit after each call. The battery
works best if the handset is returned to the base unit after two or three
calls. However, do not leave the handset off the base unit for a long
period of time as this will completely discharge the battery pack.
When to purchase a new battery pack
If the battery lasts only a few minutes even after 12 hours of charging,
the usable life of the battery has expired and needs replacement.
Contact your local Sony authorized dealer or service center, and ask
for a Sony BP-T23 rechargeable battery pack.
Note
Battery life may vary depending on usage condition and ambient temperature.
Step 3: Preparing the battery pack (continued)
Inhaltsverzeichnis
Sprachen:
Andere Sony Schnurloses Telefon Handbücher
Sony
Sony SPP-ID200 Bedienungsanleitung
Sony
Sony SCT-250 Bedienungsanleitung
Sony
Sony SPP-A972 - Cordless Telephone With Answering... Bedienungsanleitung
Sony
Sony SPP-A947 Bedienungsanleitung
Sony
Sony SPP-A60 Primary Bedienungsanleitung
Sony
Sony SPP-D900 - 900 Mhz Cordless Telephone Bedienungsanleitung
Sony
Sony SPP-A973 - Cordless Telephone With Answering... Bedienungsanleitung
Sony
Sony SPP-A967 - Cordless Telephone With Answering... Bedienungsanleitung
Sony
Sony SPP-ID970 - Cordless Telephone Bedienungsanleitung
Sony
Sony SPP-A946 Bedienungsanleitung
Sony
Sony SPP-SS961 - Cordless Telephone Bedienungsanleitung
Sony
Sony SPP-A400 - Cordless Telephone With Answering... Bedienungsanleitung
Sony
Sony SPP-A940 - 900 Mhz Cordless Telephone Bedienungsanleitung
Sony
Sony SPP-SS965 - Cordless Telephone Bedienungsanleitung
Sony
Sony SPP-S9001 - Cordless Telephone Bedienungsanleitung
Sony
Sony SPP-1000 Primary Bedienungsanleitung
Sony
Sony SPP-A250 Primary Bedienungsanleitung
Sony
Sony SPP-888 Bedienungsanleitung
Sony
Sony SPP-205 - 43-49 Mhz Cordless Phone Bedienungsanleitung
Sony
Sony SPP-A972 - Cordless Telephone With Answering... Bedienungsanleitung
