Sony Cyber-shot DSC-F828 Gebrauchs- und Pflegehandbuch

Firmware Update Manual

for Sony Cyber-shot digital still cameras -DSC-F828

The term „Firmware“ refers to the software in your Cyber-shot camera. You can update this

software to solve problems or to add new functions to your still camera, by basically downloading a

new firmware-file, copying it onto MemoryStick/ Memory Stick PRO / CompactFlash card /

Microdrive media, and inserting this Memory Stick / Memory Stick PRO / CompactFlash card /

Microdrive media into the camera. It is not possible to return to a previous firmware version

after updating this firmware. By continuing this update process and downloading and

updating this firmware, you acknowledge that you are aware and understand that this

update cannot be reversed. In case of any problem, please contact to your local Sony

Service Center.

Here’s how.

Before you start reading these instructions, check out if your PC is equipped either with a Memory

Stick slot/ Memory Stickadapter or / CompactFlash card / Microdrive adapter or with a USB-plug.

PC with Memory Stick slot or Memory

Stick adapter or / CompactFlash card /

Microdrive adapter

•In case your PC features a Memory

Stick slot or Memory Stick adapter or

CompactFlash card / Microdrive

adapter, always read the left column...

PC with USB plug only

•In case your PC features a USB-plug

but no Memory Stick slot or Memory

Stick adapter or CompactFlash card /

Microdrive adapter, always read the

right column...

...whenever a line is separating the page into two columns, as shown above.

What you need...

•A Cyber-shot camera with all-mains set (originally supplied AC power adapter, AC-L15A)

Without using AC adapter, it can lead to a major defect in your Cyber-shot camera,

which is not covered by the warranty.

•A formatted Memory Stick / Memory Stick PRO / CompactFlash card / Microdrive media.

If the Memory Stick is not new, or not formatted by your camera, problems may occur.

•A PC with Internet access and

•Memory Stick slot / Memory Stick

adapter or / CompactFlash card /

Microdrive adapter

)

•USB port

System requirements

Microsoft Windows® 98/ 98SE/ME/2000Professional/

XP Professional/ XP Home Edition

Mac OS 9.1/ 9.2/ X v10.0/ X v10.1/ X v10.2 / / X v10.3

Installed Memory: 32MB or more

Available Hard Disk Space: 5MB or more

•Memory Stick slot / Memory Stick /

CompactFlash card / Microdrive

adapter installed and working

•Your Cyber-shot camera,connected

to the PC with the supplied USB

cable, installed and working

... and how you proceed

Start your computer. In Windows2000 and XP ®, log in as administrator or make sure you have

administrator rights and permissions to download, extract and copy the firmware-file.

Step 1 -Download the firmware update file to your PC

•Make sure no program is running.

•Go to the Sony support-page

http://www.sonydigital-link.com/dime/firmware/firmware.asp?l=en,

and choose the „firmware upgrade“ button in the navigation.

•Select the camera you want to update.

•Please accept the license agreement. Please note that any download of firmware is

subject to Sony's Terms and Conditions of Website Use or the relevant License

Agreement accompanying the download!

•Download the firmware update file to your PC, and double-click it to be extracted (this

might happen automatically, depending on your system settings).

Step 2 -Copy the firmware update file to the Memory Stick / Memory Stick PRO /

CompactFlash card / Microdrive media and load it to your camera

•Put the (new or formatted)Memory

Stick / Memory Stick PRO media into

the Memory Stick Slot or adapter on

the computer or put the (new or

formatted) CompactFlash card /

Microdrive into PC card slot on the

computer.

•Select the extracted firmware-file,

right-click the file and select [copy]

from the menu

•Open the Memory Stick /

CompactFlash card / Microdrive

media drive

•Paste the copied file into the Memory

Stick / CompactFlash card /

Microdrive media’s root directory (i.e.,

do not copy it into a folder).

•After the copy-process is complete,

take out the Memory Stick / Memory

Stick PRO / CompactFlash card /

Microdrive media, in order to proceed

with the next step below.

Before you proceed: In order to establish a

properly set-up USB connection, please refer

to the instruction-manual of your camera!

•Connect your Cyber-shot camera to

your PC via the originally supplied

USB-cable, as explained in the

instruction-manual.

•Put the (new, or formatted)Memory

Stick / Memory Stick PRO /

CompactFlash card / Microdrive

media into your camera.

•Select the extracted firmware-file,

right-click the file and select [copy]

from the menu

•Open the Memory Stick /

CompactFlash card / Microdrive

media drive

•Paste the copied file to the Memory

Stick / CompactFlash card /

Microdrive media’s root directory (i.e.,

do not copy it into a folder).

•Turn the camera off, and disconnect

the USB-cable.

Step 3 -Install the firmware update file on your camera

Before you proceed: If the power runs out during the update, this can make your Cyber-shot

camera inoperable! Therefore please use the originally supplied AC adapter as power-source.

•Make sure the camera is powered, but switched off

•Insert the Memory Stick / Memory Stick PRO / CompactFlash card / Microdrive media

containing the firmware-file into your camera.

•Turn the camera’s mode-switch to SETUP.

•While pressing the menu button, turn the camera on.

•Although the firmware is already copied onto the Memory Stick / Memory Stick PRO /

CompactFlash card / Microdrive media, you will see the message "No file in this folder" on the

LCD screen. This is normal (so not a failure). Please go ahead with the next step."

•On the camera-screen-menu, select SETUP 2> VERSION.

•then it will show the CURRENT VERSION of the firmware.

•At „Version“, you will find a menu, where you need to select „Update“. „Access“ will be

shown on a blackscreen.

•If an error is shown at this step or during the rest of the updating-process, please refer to

the section „problems that may occur“ in this document.

•Check and compare the version-numbers that are shown. If the NEW VERSION number

is higher than the CURRENT VERSION number, select OK. Else select CANCEL and

stop the procedure, for you already have the latest version installed on your camera, or

you did not download the latest version from the website.

•Select OK again to proceed

•As the firmware update is executed, you will see three circle signs. The circle signs will

begin to blink and then turn on one-by-one. Once all three circles are lit, the update is

finished. The text „Finished –Turn off and on again“ appears on the screen.

Start

1/3 finished

2/3 finished

•Turn the camera off.

•Please push the "RESET" button with some sharp pointed item

Note that all settings except language and Video out will be initialised again after pushing the

"RESET" button.

("RESET" Button)

Step 4 -Check the firmware version in your camera

•Turn the mode-switch to SETUP.

•While pressing the menu button, turn the camera on.

•Select SETUP 2> VERSION and check the Version number.

•It should be the new one.

•Format Memory Stick / Memory Stick PRO / CompactFlash card / Microdrive media

after the completion of firmware update. –That’s it for the firmware update…

Problems that may occur

•Error 10

Cause: The update has failed.

Solution: Unplug AC power supply adapter.

Proceed: Re-updating (see next chapter)

•Error 20: No software file

Cause: No file was found on the Memory Stick /

Memory Stick PRO /

CompactFlash card / Microdrive media.

Proceed:Copy the firmware update file to your Memory Stick /

Memory Stick PRO / CompactFlash card / Microdrive media

(refer to Step 2)

If this doesn’t work,

proceed: Download the firmware update file to your PC

(refer to Step 1)

•Error 30: Format Memory Stick / CompactFlash card media before use

Cause: Other files or folders may exist on the MemoryStick /

Memory Stick PRO / CompactFlash card / Microdrive media

Solution: Follow the instruction manual that came with your Cyber-shot camera to

format the Memory Stick/ Memory Stick PRO / CompactFlash card /

Microdrive media.

Proceed:Copy the firmware update file to your Memory Stick /

Memory Stick PRO / CompactFlash card / Microdrive media

(refer to Step 2)

•Error 40: Invalid file

Causes: •The file on your Memory Stick/ Memory Stick PRO / CompactFlash card /

Microdrive media is not valid

•You tried to downgrade the camera

•You tried to upgrade your camera with the wrong software

•The file on the Memory Stick/ Memory Stick PRO / CompactFlash card /

Microdrive media is not containing firmware

•You already have the same version in the camera.

Proceed:Check the firmware version in your camera and Download the latest

firmware update file to your PC (refer to Step 1)

•If the circles are not fully lit, and they do not blink for over 30 seconds:

Cause: The update has failed.

Solution: Unplug AC power supply adapter.

Proceed: Re-updating (see next chapter)

Re-updating-procedure in case of error 10 or if the circles are not fully lit, and they do not

blink for over 30 seconds:Memory Stick PRO /CompactFlash card / Microdrive is not

available for re-updating.Only Blue Memory Stick is applicable for this operation.

•Leave the Memory Stick media in the camera.

•Unplug AC power supply adapter.

•Wait for 5 seconds.

•Plug in the AC power supply adapter.

•The red Memory Stick access lamp will turn on. The camera’s screen stays black.

•Approximately 2minutes later, the red Memory Stick access light will turn off.

Please push the "RESET" button with some sharp pointed item

Note that all settings except language and Video out will be initialised again after pushing the "RESET"

button.

("RESET" Button)

Check the firmware version in your camera

•Turn the mode-switch to SETUP.

•While pressing the menu button, turn the camera on.

•Select SETUP 2> VERSION and check the Version number.

•It should be the new one.

Possible problems during re-updating

If the access lamp of the Memory Stick blinks during re-updating or the access lamp doesn't

turn off after 3 minutes, a failure may have occurred with the camera or the Memory Stick

media.

Solution: Please contact a local Sony Service Center for repair options.

Sony, Cyber-shot and Memory Stick/ Memory Stick PROare registered trademarks of Sony Corporation, Japan.

Other names and products may be trademarks of their respective owners.

Andere Handbücher für Cyber-shot DSC-F828

Andere Sony Digitalkamera Handbücher

Sony

Sony DSC-TX9 Cyber-shot® Kurzanleitung

Sony

Sony DSC-N1 Betriebsanleitung

Sony

Sony SLT-A33 Bedienungsanleitung

Sony

Sony CYBER-SHOT W55 Bedienungsanleitung

Sony

Sony DSC-TX7 - Cyber-shot Digital Still Camera Bedienungsanleitung

Sony

Sony Multi Functional Digital Camera Bedienungsanleitung

Sony

Sony CYBER-SHOT DSC-W55 Bedienungsanleitung

Sony

Sony DSC-W170/R Bedienungsanleitung

Sony

Sony a7RIV Referenzhandbuch

Sony

Sony DSC-W180/R Bedienungsanleitung

Sony

Sony DynaView Plus SSC-DC693P Bedienungsanleitung

Sony

Sony ILCE-6000 Bedienungsanleitung

Sony

Sony Cyber-shot DSC-H100 Bedienungsanleitung

Sony

Sony Cyber-shot DSC-WX7 Bedienungsanleitung

Sony

Sony Cyber-shot DSC-T70 Bedienungsanleitung

Sony

Sony ILME-FR7 Referenzhandbuch

Sony

Sony Cyber-Shot DSC-HX90V Bedienungsanleitung

Sony

Sony DSC-W120/L Bedienungsanleitung

Sony

Sony Cyber-shot DSC-T100 Bedienungsanleitung

Sony

Sony DSC S730 - Cyber-shot Digital Camera Bedienungsanleitung

Sony

Sony Cyber-shot DSC-W370 Bedienungsanleitung

Sony

Sony Cyber-shot DSC-W320 Bedienungsanleitung

Sony

Sony Cyber-shot PRO DSC-D700 Bedienungsanleitung

Sony

Sony Syber-shot DSC-L1 Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Canon

Canon EOS ELAN7 Bedienungsanleitung

Samsung

Samsung SCC-C4253 Bedienungsanleitung

JVC

JVC GT-HM890 Bedienungsanleitung

GE POWER series E1486TW Bedienungsanleitung