Sony MBH10 Bedienungsanleitung

User guide

Mono Bluetooth™Headset

MBH10

Contents

Function overview..........................................................................3

Accessory overview.......................................................................4

Basics.............................................................................................5

Charging the battery..........................................................................5

Turning the headset on and off..........................................................5

Pairing the headset with compatible devices....................................5

Adjusting the volume.........................................................................6

Wearing instruction............................................................................6

Call handling...................................................................................7

Multipoint technology.....................................................................8

Troubleshooting.............................................................................9

I cannot answer a second call...........................................................9

The headset turns off automatically...................................................9

Unexpected behaviour.......................................................................9

No connection between headset and other device...........................9

Legal information..........................................................................10

Declaration of Conformity for MBH10 .........................................11

This is an Internet version of this publication. © Print only for private use.

Function overview

With the Mono Bluetooth™ Headset MBH10, you can control incoming and

outgoing phone calls while you listen to music from your phone. You can connect

your Bluetooth™ headset to two Bluetooth™ devices at the same time so that you

can receive calls from two phones without having to disconnect and reconnect.

This is an Internet version of this publication. © Print only for private use.

Accessory overview

1. Ear speaker

2. Volume key

3. Microphone

4. Ear hook

5. Notification light

6. Power key/Call key

7. Ear speaker cover

8. Micro USB port

9. NFC detection area

Compatibility information for your accessory is available at www.sonymobile.com/support.

This is an Internet version of this publication. © Print only for private use.

Basics

Charging the battery

Before using the Mono Bluetooth™ Headset MBH10 for the first time, you need to

charge the headset for approximately 2.5 hours. Sony chargers are recommended.

To charge the battery

1Plug one end of the USB cable into the charger (or into the USB port of a

computer).

2Plug the other end of the cable into the Micro USB port on your Mono

Bluetooth™ Headset MBH10.

Turning the headset on and off

To turn on the headset

•Press and hold down the Power key until the notification light turns green.

To turn off the headset

•Press and hold down the Power key until the red notification light flashes once.

Pairing the headset with compatible devices

Before you can use the headset, you need to pair it with a Bluetooth™ compatible

device, for example, a phone. There are two ways to pair the headset: manually, and

automatically using NFC. After successful pairing, the headset connects to the

Bluetooth™ compatible device as soon as the headset is turned on and within range.

After that, you can also pair the headset with a second Bluetooth™ compatible

device in the same way.

To manually pair the headset with a Bluetooth™ device

1Make sure the Bluetooth™ device has the Bluetooth™ function turned on.

2Turn off the headset.

3Headset: Press and hold down the Power key until a green notification light

starts flashing rapidly.

4Bluetooth™ device: Scan for Bluetooth™ devices, then select MBH10 in the

list of available devices.

5Bluetooth™ device: Follow the pairing instructions that appear. If a passcode

is required, enter "0000".

This is an Internet version of this publication. © Print only for private use.

To automatically pair your headset with a Bluetooth™ device

1Make sure that the Bluetooth™ device has the NFC function turned on and

that the screen is active and unlocked.

2Place the Bluetooth™ device over your headset so that the NFC detection area

of each device touches the other.

3Follow the pairing instructions that appear on the Bluetooth™ device. If a

passcode is required, enter "0000".

The device used in this illustration is for illustration purposes only and may not accurately

depict the actual device used.

You can pair your headset with a compatible device using NFC even when the headset is

turned off.

Adjusting the volume

To change the call volume

•During a call, press the Volume key.

You hear a slightly longer, higher-pitched beep when the volume reaches the maximum level.

After the volume reaches the maximum level, the volume goes down if you keep pressing the

Volume key.

Wearing instruction

You can wear the headset with or without the ear hook, and on either the left or right

ear.

This is an Internet version of this publication. © Print only for private use.

Call handling

To answer a call with the headset

•When you hear an incoming call signal, press the Call key.

To end a call

•During an ongoing call, press the Call key.

To reject a call

•When you hear an incoming call signal, press and hold down the Call key.

To mute the microphone during a call

•Press and hold down the Volume key.

When the microphone is muted, press and hold down the Volume key again to activate the

microphone.

To answer a second call

•When you hear an incoming call signal during an ongoing call, press the Call

key. The ongoing call is put on hold.

To reject a second call

•When you hear an incoming call signal during an ongoing call, press and hold

down the Call key.

To switch between two calls

•Press and hold down the Call key.

This is an Internet version of this publication. © Print only for private use.

Multipoint technology

Use Multipoint technology to connect your headset to two Bluetooth™ devices at the

same time. For example, if you connect your headset with two phones, you can

receive calls from both phones without having to disconnect and reconnect.

If you prefer that your headset connects to just one Bluetooth™ device at any given

time, you can use Singlepoint mode instead. Singlepoint mode is enabled by default.

Before pairing your headset with a new device in Singlepoint mode, make sure that

you disconnect it from other devices.

Multipoint mode consumes more battery power than Singlepoint mode.

To connect your headset to two devices at the same time

1Make sure that the headset is turned off and that the two Bluetooth devices

have the Bluetooth™ function turned on.

2Press and hold down the Volume key while turning on the headset. After

Multipoint mode is activated, a yellow notification light will flash twice.

3Pair and connect your headset to the two Bluetooth™ devices, one after the

other.

4To deactivate Multipoint mode, press and hold down the Volume key again

while turning on the headset. After Multipoint mode is deactivated, a yellow

notification light will flash once.

In Multipoint mode, if the connection to the first Bluetooth™ device is lost when you connect

to a second device, restart your headset.

This is an Internet version of this publication. © Print only for private use.

Troubleshooting

I cannot answer a second call

•Make sure that your calling device supports the Bluetooth™ headset profile.

•Make sure that the correct calling device is selected.

The headset turns off automatically

•If the headset beeps several times shortly before turning off, the battery level is low.

Charge the battery.

Unexpected behaviour

•Restart the headset.

No connection between headset and other device

•Make sure that the headset is charged and within range of the device that you want

to connect to. A maximum distance of 10 metres (33 feet), with no solid objects in

between, is recommended.

•Disable the Bluetooth™ function in the other device so that all connections are

closed, then re-enable the Bluetooth™ function and pair the headset with the device

again.

This is an Internet version of this publication. © Print only for private use.

Legal information

Sony MBH10

Prior to use, please read the Important information leaflet separately provided.

This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any

warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of

current information, or improvements to programs and/or equipment, may be made by Sony Mobile

Communications AB at any time and without notice. Such changes will, however, be incorporated into new

editions of this User guide.

©Sony Mobile Communications AB, 2012

Publication number: 1276-4920.1

Interoperability and compatibility among Bluetooth™ devices varies. Device generally supports products

utilizing Bluetooth spec. 1.2 or higher, and Headset or Handsfree profile.

Sony is the trademark or registered trademark of Sony Corporation. Bluetooth is the trademark of the

Bluetooth (SIG) Inc. and is used under license. All other marks are the property of their respective owners. All

rights reserved.

All product and company names mentioned herein are the trademarks or registered trademarks of their

respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of

their respective owners.

Visit www.sonymobile.com for more information.

All illustrations are for illustration only and may not accurately depict the actual accessory.

This is an Internet version of this publication. © Print only for private use.

Andere Handbücher für MBH10

Inhaltsverzeichnis

Andere Sony Headset Handbücher

Sony

Sony BC-WF1000X Bedienungsanleitung

Sony

Sony MDR-ZX750BN Bedienungsanleitung

Sony

Sony DR-310DP/PNK Bedienungsanleitung

Sony

Sony WH-CH500 Bedienungsanleitung

Sony

Sony Float Run Referenzhandbuch

Sony

Sony DR-BTN200 Bedienungsanleitung

Sony

Sony DR-BT21IK/B - Wireless Transmitter And Bluetooth... Bedienungsanleitung

Sony

Sony STH40D Bedienungsanleitung

Sony

Sony DR-BT101 Bedienungsanleitung

Sony

Sony MDR-1ABT Bedienungsanleitung

Sony

Sony WH-1000XM2/B Referenzhandbuch

Sony

Sony MDR-ZX750BN Bedienungsanleitung

Sony

Sony PLAYSTATION 3 CECHYAS-0075 Bedienungsanleitung

Sony

Sony DR-EX14VP Bedienungsanleitung

Sony

Sony DR-EX13DPV Bedienungsanleitung

Sony

Sony DR-EX14VP/VLT Bedienungsanleitung

Sony

Sony PlayStation CECHYA-0086 Bedienungsanleitung

Sony

Sony WIC400/L Referenzhandbuch

Sony

Sony DR-350USB Bedienungsanleitung

Sony

Sony WH-CH720N Referenzhandbuch

Sony

Sony XBA-4iP Bedienungsanleitung

Sony

Sony WF-XB700 Bedienungsanleitung

Sony

Sony DR-EX12iP Bedienungsanleitung

Sony

Sony WH-CH500 Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung