Sony SBH90C Bedienungsanleitung

User guide

2-way Style USB Audio &

Bluetooth®Headset

SBH90C

Contents

Introduction...................................................................................3

Function overview.............................................................................3

Hardware overview........................................................................... 3

Basics.............................................................................................5

Charging............................................................................................5

Turning on and o............................................................................ 5

Adjusting the volume....................................................................... 5

Wearing instruction.......................................................................... 6

Getting started.............................................................................. 7

Connecting your headset using the dedicated headphone

cable.................................................................................................. 7

Pairing your headset with an Android or iOS device....................... 7

Resetting your headset.................................................................... 8

Using your headset.......................................................................9

Using your headset for phone calls..................................................9

Using your headset to listen to music..............................................9

Using the voice assistant function..................................................10

Using Multipoint mode................................................................... 10

Legal information......................................................................... 11

Declaration of Conformity for SBH90C............................................12

Introduction

Function overview

Your 2-way Style USB Audio & Bluetooth® Headset SBH90C lets you listen to music

in Hi-Res when plugged in with the dedicated headphone cable or listen wirelessly

with Bluetooth. You can also handle calls hands-free and use the voice assistant

when paired with a compatible Android™ or iOS device. You can connect your

headset with up to two compatible devices at the same time. This lets you receive

calls from both devices without having to disconnect and reconnect.

Hardware overview

1. Neckband Wear the headset on your neck.

2. LED indicator The LED colour indicates the battery level:

•Green: 80% or more.

•Orange: 15% - 80%.

•Red: Less than 15%.

The LED ﬂash frequency indicates status:

•Flashes slowly three times when you press the power

key to check the battery level.

•Repeatedly ﬂashes twice in blue when in pairing mode.

•Repeatedly ﬂashes four times in green during incoming

calls.

3. Power key Short press to:

•Check the battery level.

Long press for 1 second to:

•Power on and attempt to connect.

•Power o.

Long press for 7 seconds to:

•Power on and enter pairing mode.

Long press for 10 seconds to:

•Reset your headset.

This is an internet version of this publication. © Print only for private use.

4. NFC detection

area

Touch other devices to this area to use NFC.

5. Microphone Make phone calls or use the voice assistant.

6. Volume key Press to increase the volume.

7. Volume key Press to decrease the volume.

8. Multi-function

key

Short press to:

•Answer or end a call.

•Play or pause the current music track.

•Attempt to reconnect (for Bluetooth connection only).

Long press for 1 second to:

•Reject incoming calls.

•Mute or unmute the microphone during a call.

•Activate the voice assistant.

Quickly press twice to:

•Switch between calls (for Bluetooth connection only).

•Skip to the next music track.

Quickly press three times to:

•Skip to the previous music track.

9. Charger/USB

port

Insert a USB Type-C cable to charge the battery.

10. Headphone Use the magnetic earbuds to avoid tangling the cables

when the headset is not used.

The power key is disabled and some of the functions for the multi-function key may not

work when the headset and device are connected with the dedicated headphone cable.

This is an internet version of this publication. © Print only for private use.

Basics

Charging

Before using your headset for the ﬁrst time, it is recommended to charge it with a

Sony charger. The LED indicator turns green when the battery is fully charged.

A drained headset needs to charge for up to 2 hours to be fully charged. Battery

life is approximately 7.5 hours while listening to music or approximately 9 hours

while handling calls if the temperature is 25 °C (77 °F).

Your headset has a capless USB port. The USB port must be completely dry before a cable

can be connected for charging.

To charge your headset

1Connect one end of the charging cable to the charger or the USB port of a

computer.

2Connect the other end of the cable to the USB port on your headset.

For the recommended charger, see

http://www.sonymobile.com/products/accessories/

Turning on and o

To turn on your headset

•Long press the power key for 1 second. The LED indicator ﬂashes twice in

green.

To turn o your headset

•Long press the power key for 1 second. The LED indicator ﬂashes once in

green.

If your headset is left idle for 10 minutes, it turns o automatically.

Adjusting the volume

To change the volume

•During a call or when listening to music, press the volume key or to

increase or decrease the volume.

Avoid using your headset on high volume, as this may cause permanent hearing damage or

disturb others around you.

This is an internet version of this publication. © Print only for private use.

Wearing instruction

Wear your headset on your neck and insert the headphones into both ears. When

wearing your headset, carry your Android or iOS device on the left side of your

body to facilitate pairing.

Do not use strong force to bend the neckband. If the neckband breaks, stop using the

device to avoid injury.

For your safety, do not use your headset to handle calls while you are driving. To prevent

accidents, it is not recommended to use your headset while walking, running or cycling.

This is an internet version of this publication. © Print only for private use.

Getting started

Connecting your headset using the dedicated headphone cable

To connect your headset using the dedicated headphone cable

1Connect the dedicated headphone cable to the device.

2Connect the dedicated headphone cable to the USB Type-C port of your

headset. See the user manual of the device for details about USB

connection.

Depending on the device, the multi-function key may not work as intended when your

headset and device are connected using the dedicated headphone cable. Incoming call

signals may also be emitted from or displayed as notiﬁcations on the device instead of your

headset.

You can charge your headset while connected to a device using the dedicated headphone

cable.

Pairing your headset with an Android or iOS device

To pair your headset with an Android device, you can use either One-touch

connection (NFC) or Bluetooth. To pair your headset with an iOS device, use

Bluetooth. If a passcode is required while pairing, enter “0000”.

After you pair your headset with an Android or iOS device, the information is

saved. Your headset can save up to eight paired devices.

Whenever the most recently paired device is in range, your headset tries to

reconnect automatically.

If a cable is connected to the USB port to charge or to listen, you cannot pair your headset

using Bluetooth.

This is an internet version of this publication. © Print only for private use.

To pair with an Android device using One-touch connection (NFC)

1Make sure that your headset is fully charged.

2On the Android device, make sure that NFC is turned on and the screen is

unlocked.

3Touch the NFC area of your headset against the NFC detection area of the

Android device.

4Follow the on-screen instructions on the Android device to complete the

pairing.

To pair your headset with an Android or iOS device using Bluetooth

1Make sure that your headset is fully charged and turned o.

2On the Android or iOS device, make sure that Bluetooth is turned on.

3Long press the power key for approximately 7 seconds.

4Scan for available Bluetooth devices on the Android or iOS device, then

select SBH90C.

The headset automatically enters pairing mode when it's powered on for the ﬁrst time.

Resetting your headset

You can perform a hardware reset or a factory reset on your headset.

Perform a hardware reset if your headset stops responding. When performing a

hardware reset, information about paired devices is not lost. Perform a factory

reset if your headset behaves unexpectedly. Factory reset restores your headset to

its original settings and information about paired devices is lost.

To perform a hardware reset on your headset

•Long press the power key for 10 seconds.

To perform a factory reset on your headset

1Turn o your headset.

2Long press the power key and the multi-function key at the same

time for 1 second. The LED indicator will ﬂash four times in green.

This is an internet version of this publication. © Print only for private use.

Using your headset

Using your headset for phone calls

For your safety, do not use your headset to handle calls while you are driving. To prevent

accidents, it is not recommended to use your headset while walking, running or cycling.

For these functions to work, you must use an Android or iOS device that supports

the relevant functions, for example, call handling.

To answer a call

•When you hear an incoming call signal, short press the multi-function key .

To end a call

•During an ongoing call, short press the multi-function key .

To reject a call

•When you hear an incoming call signal, long press the multi-function key

for 1 second.

To answer a second call

•When you hear an incoming call signal during an ongoing call, short press the

multi-function key to answer the second call. The ongoing call is put on

hold.

To reject a second call

•When you hear an incoming call signal during an ongoing call, long press the

multi-function key for 1 second to reject the second call.

To switch between ongoing calls

•Quickly press the multi-function key twice. The other call is put on hold.

To mute the microphone during a call

•Long press the multi-function key for 1 second. You will hear beeps.

To unmute the microphone, long press the key again for 1 second until you

hear beeps.

Using your headset to listen to music

When your headset is connected to an Android or iOS device, you can play audio

content such as music from the Android or iOS device using your headset. Open

the relevant application on the Android or iOS device to start listening to audio

content.

To pause or skip music tracks

1When listening to music, short press the multi-function key to pause

the track. Short press again to resume.

2Quickly press the multi-function key twice to skip to the next track.

3Quickly press the multi-function key three times to go back to the

previous track.

This is an internet version of this publication. © Print only for private use.

Using the voice assistant function

To start the voice assistant

•Long press the multi-function key for 1 second to talk to the voice

assistant.

For these functions to work, you must use an Android or iOS device that supports the

relevant functions. Follow the on-screen instructions on the Android or iOS device.

Using Multipoint mode

You can use Multipoint mode to pair your headset with two compatible Android or

iOS devices at the same time. This lets you receive calls from both paired devices

without having to disconnect and reconnect.

In Singlepoint mode, your headset pairs with only one Android or iOS device.

Singlepoint mode is enabled by default. If you want to stay in Singlepoint mode

but change to a new Android or iOS device, disconnect your headset from the ﬁrst

device then pair it with the new device.

The voice assistant feature is not available in Multipoint mode.

To activate Multipoint mode

1Turn o your headset.

2Long press the volume key and the power key until the LED indicator

ﬂashes quickly twice in green, then ﬂashes slowly twice in green to indicate

that Multipoint mode is turned on.

3When the LED indicator ﬂashes in blue, pair your headset with an Android or

iOS device.

See

Pairing your headset with an Android or iOS device

on page 7 for details on how to

pair.

To activate Singlepoint mode

1Turn o your headset.

2Long press the volume key and the power key until the LED indicator

ﬂashes quickly twice in green, then ﬂashes slowly once in green to indicate

that Singlepoint mode is turned on.

When you turn o Multipoint mode, your headset remains paired with the most recently

paired device.

This is an internet version of this publication. © Print only for private use.

Inhaltsverzeichnis

Andere Sony Headset Handbücher

Sony

Sony WF-SP800N Bedienungsanleitung

Sony

Sony SBH56 Bedienungsanleitung

Sony

Sony MDR-XB950BT Bedienungsanleitung

Sony

Sony DRBT160AS - Bluetooth Stereo Headset Bedienungsanleitung

Sony

Sony Xperia Ear Duo Betriebsanleitung

Sony

Sony CECHYA-0083 Bedienungsanleitung

Sony

Sony DR-350USB Bedienungsanleitung

Sony

Sony DRBT140Q - Bluetooth Wireless Stereo Headset Bedienungsanleitung

Sony

Sony DR-BT21G - Stereo Bluetooth Headset; Neckband... Bedienungsanleitung

Sony

Sony MDR-ZX770BN Bedienungsanleitung

Sony

Sony WF-XB700 Bedienungsanleitung

Sony

Sony WF-SP900 Referenzhandbuch

Sony

Sony DR-BTN200 Bedienungsanleitung

Sony

Sony DR-BTN200M Bedienungsanleitung

Sony

Sony WH-1000XM2/B Referenzhandbuch

Sony

Sony WH-CH510 Referenzhandbuch

Sony

Sony MDR-AS600BT Bedienungsanleitung

Sony

Sony h.ear in 2 WI-H700 Bedienungsanleitung

Sony

Sony DR-E10iP Bedienungsanleitung

Sony

Sony WF-1000XM4 Bedienungsanleitung

Sony

Sony WI-XB400 Referenzhandbuch

Sony

Sony DR-350USB Bedienungsanleitung

Sony

Sony MDR-ZX780DC Bedienungsanleitung

Sony

Sony MDR-XB95081 Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung