Sony SRX-R515P Bedienungsanleitung

Bulletin No.: 036 19

February, 2013

SRX-R515P

DCinema Bulletin Archive:

https://filex.sony-europe.com/

SRX-R515P v1.00.0 Networking Functionality

Overview

The SRX-R515P with v1.00.0 software is now available but cannot be connected to the Sony

TMS until the next version up. The SRX-R515P however is still capable of being controlled

over the network and accessing DCP and KDMs from a central storage device. This allows

the R515 to be installed at inaccessible locations, such as projection pods, but still able to be

operated over the network. Below is a list of functions that are described in this document:

Network overview of SRX-R515P

Configuring SRX-R515P IP addresses

Configuring Storage Server IP addresses

Accessing the R515 GUI over the network

Setting up a folder share for DCP/KDM ingest over the network

Configuring R515 to access a folder share for DCP/KDM ingest

Configuring R515 to access a FTP server for DCP/KDM ingest

Note. It is not recommended to perform ingesting operations or SPL editing during

play-out when using SRX-R515P v1.00.0 software. This is expected to be improved in

the next firmware version.

Bulletin No.: 036 19

February, 2013

SRX-R515P

DCinema Bulletin Archive:

https://filex.sony-europe.com/

Network Overview of SRX-R515P

When connecting the SRX-R515P to a network there are two required network connections

to the XCT-S10 server, and one network connection between the XCT-S10 and the XCT-

M10 (IMB).

XCT‐S10(Server)–NetworkPorts

Figure 1 - XCT-S10 rear view

10 – SPARE Port – Available for future expansion

11 – DATA Port – Used for the transfer of DCPs via FTP or file share

12 – CTRL Port – Used for control data such as accessing the GUI or audio processor

control.

13 – PRJ Port – Used for communication data between the Server and the IMB.

XCT‐M10(IMB)–NetworkPorts

Figure 2 - XCT-M10 rear view

1 – NETWORK – Used for communication data between the Server and the IMB.



Bulletin No.: 036 19

February, 2013

SRX-R515P

DCinema Bulletin Archive:

https://filex.sony-europe.com/

ConnectingR515toaWindowsstoragedevice

The diagram below shows a typical example of a storage device connected to 2x SRX-

R515P projectors.

SRX‐R515

XCT‐M10(IMB)

XCT‐S10(Server)

SRX‐R515

XCT‐M10(IMB)

XCT‐S10(Server)

GbNETWORKSWITCH

PRJ

NETWORK

PRJ

NETWORK

CTRL DATA CTRL DATA

ServerStoragewith

XXTB

Projector1

CTRLPortIP– 192 .168 .101 .11

DATAPortIP – 192.168.201.11

Projector2

CTRLPortIP– 192.168.101.12

DATAPortIP – 192.168 .201.12

NB.DATAportIPAddress

mustbeonadifferentsubnet

totheCTRLportIPAddress .

TheSwitchcanbeconfiguredforseparate

VLANsforthecontrolanddatatraffic .This

isuptotheinstaller /customerpreference .

IftheStoragedevicehastwoNICsyoumay

wishtosetonetotheCTRLsubnetandthe

othertotheDATAsubnet .IfonlyoneNICis

availablesettwoIPaddressesfortheoneNIC .

Server

CTRLIP– 192.168.101.5

DATAIP – 192.168 .201 .5

Figure 3 - Network Storage connection example

The XCT-S10 requires that the CTRL IP address and the DATA IP address are required to

be on separate subnets. This can be used to separate CTRL and DATA traffic through the

use of VLANs on a switch.

Bulletin No.: 036 19

February, 2013

SRX-R515P

DCinema Bulletin Archive:

https://filex.sony-europe.com/

Configuring SRX-R515P IP addresses

To configure the IP address of the SRX-R515P login to the GUI on the touchscreen. Go to

Configuration > System > Network.

Select Manual IP Address. In the screen shot below the following details were used.

SMSServerSetting

IP Address – 192.168.101.111

Subnet Mask – 255.255.255.0

Default Gateway – 0.0.0.0

DataPortSetting

IP Address – 192.168.201.111

Subnet Mask – 255.255.255.0

Default Gateway – 0.0.0.0

Figure 4 - IP Settings for SRX-R515P

Bulletin No.: 036 19

February, 2013

SRX-R515P

DCinema Bulletin Archive:

https://filex.sony-europe.com/

Configuring Storage Server IP Addresses

The storage server or PC that you wish to connect to the R515 will require an IP address on

the same subnet as the CTRL Port to access the GUI, and an IP address on the same

subnet as the DATA port for the server to be seen as a DCP/KDM source.

This can be achieved in two ways either give separate IPs to two NICs on the server, or

configure one NIC with two IP addresses. Below is the procedure to configure one NIC with

two IP addresses on Windows Server 2008 R2.

ConfiguringtwoIPaddressesonWindowsServer2008

Log on to the server/PC you wish to access the R515 from.

Go to Start Menu > Control Panel > Network and Sharing Centre > Network Adapters.

Right Click on the Network adapter and select Properties > Internet Protocol Version 4

properties.

The following screen will appear.

Figure 5 IP4 properties

Select ‘Use the following IP Address’ and enter an IP in the CTRL in Subnet range. Since

the CRTL in IP is 192.168.101.111 this was chosen as 192.168.101.5.

To add a second IP address to the NIC click the ‘Advanced’ button, then click add to the IP

address section. Since the DATA in IP is 192.168.201.111 this was chosen as

192.168.201.5.

Bulletin No.: 036 19

February, 2013

SRX-R515P

DCinema Bulletin Archive:

https://filex.sony-europe.com/

Figure 6 - Adding 2nd IP address to Server

Accessing SRX-R515P GUI over the network

Once the IP addresses are set on the projector and the server/PC you are ready to access

the R515 GUI on the remote server/PC.

You are required to install the latest Chrome or Firefox v14 and above browser for this

purpose, Internet Explorer does not work.

Enter the following address into the browser:

https://xxx.xxx.xxx.xxx/EvansGUI/run.html

xxx.xxx.xxx.xxx = IP address of CTRL in port of projector

A certificate issue with the website may occur, press “proceed anyway” to continue to the

GUI screen. Please see the SRX-R515P installation manual for more details on how to avoid

this message.

Bulletin No.: 036 19

February, 2013

SRX-R515P

DCinema Bulletin Archive:

https://filex.sony-europe.com/

Setting up a folder share for DCP/KDM ingest over the network

On the server/PC you wish to setup a folder for ingesting DCP and KDM content to the R515

follow the steps below.

1- Right click on the desktop and create a new folder.

2- Rename the folder ‘library1’

3- Right Click on the folder and select ‘share with’ then ‘specific people’

4- Enter everyone with read/write permissions.

5- Click share and note the share location. Substitute the Server/PC with the DATA IP

address of the server.

a. E.g. \\192.168.201.5\library1

6- This will give all users of the server/PC access to this share folder.

7- Copy DCPs into this folder which you wish to share with the SRX-R515P (make sure

you copy them into separate folders).

8- Inside this Library1 folder if you create a folder named ‘KDM’ you can place KDMs in

this folder which can be browsed to for KDM ingest.

Bulletin No.: 036 19

February, 2013

SRX-R515P

DCinema Bulletin Archive:

https://filex.sony-europe.com/

Configuring R515 to access a folder share for DCP/KDM ingest

1- Login to the R515 GUI using the webpage address

2- Go to Configuration tab > Library tab > Folders tab

3- Enter the following information

a. Name – Library1

b. Storage Type – Network Folder

Bulletin No.: 036 19

February, 2013

SRX-R515P

DCinema Bulletin Archive:

https://filex.sony-europe.com/

c. Usage – ANY

d. Local Path - /mnt/Library1

e. Device/Network Path - //192.168.201.5/Library1

i. Not these are forward slashes, and the IP is the DATA IP of

Server/PC

f. Domain – enter domain of Server/PC

g. Username - enter user of Server/PC

h. Password - enter password of Server/PC

4- Click ‘New’ next to source list at the top left to apply settings

5- The source is now shown in the list

Figure 7 - Source List

6- Shutdown the SRX-R515P via the GUI (grey box at the top right) and turn off

projector head breaker. Power on the projector head breaker and then the XCT-S10.

Figure 8 - Power off button

Be aware that the GUI will disconnect once it begins to shut down and will remain on

this same screen when it is viewed remotely via a browser. It will not show you when

the R515 has completed the shutdown. Typically a shutdown takes a few minutes.

7- Login and go to Library > External Folder list then click ‘Open’. A list of DCPs will be

shown. Select and open required DCP folder, then select DCP file and click Ingest.

Bulletin No.: 036 19

February, 2013

SRX-R515P

DCinema Bulletin Archive:

https://filex.sony-europe.com/

Figure 9 - External Folder DCP List via Network Share

A typical network share ingest speed is around 40-50MB/s which will result in a typical 2hour

feature to be ingested in around 1 hour.

Andere Handbücher für SRX-R515P

Andere Sony Heimkinosystem Handbücher

Sony

Sony HT-6900DP Bedienungsanleitung

Sony

Sony DAV-FC8 - Dvd Dream System Bedienungsanleitung

Sony

Sony DAV-JZ8888K Bedienungsanleitung

Sony

Sony DAV-DZ340 Bedienungsanleitung

Sony

Sony HT-S20R Benutzerhandbuch

Sony

Sony Bravia Theater DAVHDZ273 Bedienungsanleitung

Sony

Sony BDV-NF620 Bedienungsanleitung

Sony

Sony BDV-IT1000ES Bedienungsanleitung

Sony

Sony SA-VE315 Bedienungsanleitung

Sony

Sony HT-DDW685 Bedienungsanleitung

Sony

Sony BDV-N590 Bedienungsanleitung

Sony

Sony HT-DDW750 Bedienungsanleitung

Sony

Sony 3-285-995-11(1) Bedienungsanleitung

Sony

Sony HT-XT1 Benutzerhandbuch

Sony

Sony HT-DDW650 Bedienungsanleitung

Sony

Sony DAV-HDX265 - Bravia Theater Home System Kurzanleitung

Sony

Sony DAV-FX100W - Wireless Dvd Dream System Bedienungsanleitung

Sony

Sony DAV-DZ120 Bedienungsanleitung

Sony

Sony 4-178-247-13(2) Bedienungsanleitung

Sony

Sony HT-SF2000 Bedienungsanleitung

Sony

Sony DAV X1 - Platinum DVD Dream Home Theater... Bedienungsanleitung

Sony

Sony DAV-DZ340K Technisches Datenblatt

Sony

Sony HT-XT100 Bedienungsanleitung

Sony

Sony HT-XT3 Benutzerhandbuch

Beliebte Heimkinosystem Handbücher anderer Marken

Samsung

Samsung HT-ES4200K Bedienungsanleitung

Harman Kardon

Harman Kardon HS 100 Bedienungsanleitung

Samsung

Samsung HT-P10 Bedienungsanleitung

Philips

Philips HTS5131 Betriebsanleitung

Goodmans

Goodmans GDVD19SWS Bedienungsanleitung

Moxi

Moxi media center Bedienungsanleitung

Samsung

Samsung HT-EM35 Bedienungsanleitung

LG HE903PAW Bedienungsanleitung

Bose

Bose SoundTouch 520 Bedienungsanleitung

Manta

Manta GK-500 Bedienungsanleitung

Sharp

Sharp SBW800 Bedienungsanleitung

Philips

Philips HTS3541 Bedienungsanleitung

LG LHT799 Bedienungsanleitung

Samsung

Samsung HT-TWZ415 Bedienungsanleitung

Loewe

Loewe REFERENCE 52 SL FHD+ 200 NMP Bedienungsanleitung

Samsung

Samsung AH68-02166R Bedienungsanleitung

RCA

RCA 600-Watt Bedienungsanleitung

Samsung

Samsung HT-DS630T Bedienungsanleitung