Sony Bravia KLV-40ZX1 Bedienungsanleitung

KLV-40ZX1

4-146-299-11(1)

Printed in Japan

4-146-299-11(1)

APPROVED

Customer Support:

TA-2008/1457

TA-2008/1214

KLV-40ZX1

4-146-299-11(1)

KLV-40ZX1

LCD Colour TV

Operating Instructions

2GB

Introduction

Thank you for choosing this Sony product.

Before operating the TV, please read this manual thoroughly and

retain it for future reference.

Trademark information

sHDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

s“BRAVIA” and are trademarks of Sony

Corporation.

s“XMB” and “xross media bar” are the trademarks of Sony

Corporation and Sony Computer Entertainment Inc.

Notice for Identification Label

Labels for Model No. and Power Supply rating (in accordance with

applicable safety regulation) are in the following locations:

Monitor: at the inside of the terminal cover

Media receiver: on the underside

Notice for customers in the South

Africa

The Euro/South Africa converter plug should be fitted as follows.

Notice for customers in Thailand

This telecommunication equipment conforms to NTC technical

requirement.

1Insert the power supply or

CEE7 plug in to the

converter plug.

2Use an appropriate

screwdriver to attach the

screw tightly without

damaging the screw head.

3TEST: Grip the converter

plug, and pull the VDE

cord set/transformer to

ensure it is fully secure, if

not then increase the torque

setting and further tighten.

Re-test.

The converter plug is now

ready for use.

3GB

Table of Contents

Start-up Guide 4

Safety Information ..........................................................................................................................15

Precautions .....................................................................................................................................17

Remote and Unit Controls/Indicators............................................................................................18

Watching TV

Watching TV ....................................................................................................................................23

Using the Favourite list ..................................................................................................................25

Using Optional Equipment

Connecting Chart ............................................................................................................................26

Viewing Pictures from Connected Equipment .............................................................................28

Using USB Photo Viewer................................................................................................................29

Using BRAVIA Sync with Control for HDMI..................................................................................30

Using MENU Functions

Navigating through Media Receiver Home Menu (XMB™)..........................................................31

Settings............................................................................................................................................32

Navigating through Monitor Home Menu......................................................................................37

Additional Information

Specifications..................................................................................................................................43

Troubleshooting..............................................................................................................................45

Before operating the TV, please read the “Safety information” section of this manual.

Retain this manual for future reference.

4GB

Start-up Guide

1: Checking the unit and

accessories

Monitor (1)

Media receiver (1)

AC power cord for monitor

AC power cord for AC adaptor

AC adaptor for media receiver (1)

Remote RMF-GA001 (1)

Size AA batteries (R6 type) (2)

IR Blaster (Y-cable) (2)

Stand for media receiver (1)

Terminal cover (1)

Spacers (black) (4)

Table-Top Stand (1) and screws M5 × 8 (4)

Stand Support adaptor (1)

2: Installing the TV

The following steps must be performed to

correspond with the installation steps in the

instruction manual of the optional accessories.

Follow the instructions in this manual

referring to the instruction manual supplied

with the accessories.

Installing on a TV stand

1Remove the Table-Top Stand, accessory

box and accessory bag from the carton.

The screws and booklet can be found in

the accessory bag attached on the rear of

the monitor.

For product protection and safety reasons,

Sony strongly recommends that you use

the screws provided with the display.

• Do not remove the blue tape that secures the

plate on the rear of the monitor until you

finish installing the Table-Top Stand.

Table-Top Stand

Accessory box

Monitor

Accessory bag

5GB

Start-up Guide

2Place the Table-Top Stand on a level and

stable surface, then remove the stand

cover.

3Gently slide the monitor onto the neck of

the Table-Top Stand by aligning the F

mark of the plate to the top part of the

Table-Top Stand. Be sure to work with

two or more people.

4Attach the monitor to the Table-Top Stand

using the supplied screws. Attach the two

bottom screws first, then the top two

screws.

• If an electric screwdriver is used, set the

torque to tighten at approximately 1.5 N·m

{15 kgf·cm}.

• Do not put stress on the LCD panel or the

frame around the screen.

• Hold the Table-Top Stand firmly with both

hands.

5Connect the AC power cord (supplied) to

the AC IN jack.

• Insert the plug fully into the jack.

• When using with an HDMI equipment, also

connect the HDMI cable to the HDMI IN

jack (page 26).

Stand cover

Fmark

Top part

Top screws

Bottom screws

to AC power

outlet

(Continued)

6GB

6Attach the stand cover.

Hang the stand cover over the top of the

Table-Top Stand’s centre post, and then

push down to close until it clicks.

• Be sure not to pinch the AC power cord when

attaching the cover.

7Attach the terminal cover.

8Connect the TV to your AC power outlet

(110-240V AC, 50/60Hz).

Removing the Table-Top Stand

If the monitor is to be wall-mounted, remove

the Table-Top Stand.

1Place the monitor face down.

Lay a mat (packing sheet, etc.) on a table

wider than the monitor, then place the

monitor on the table with the stand

hanging over the edge of the table. Be

sure to work with two or more people.

2Remove the four screws from the Table-

Top Stand.

• Do not use the screws removed from the

Table-Top Stand for the Wall-Mount

Bracket.

• When you carry the monitor, move the

monitor with a mat laid below.

• Hold the Table-Top Stand firmly with both

hands.

Installing on a wall

Prepare the following items;

– SU-WL700 Wall-Mount Bracket (not supplied)

– SS-WAL700 Speaker System (not supplied)

– Spacers (black) (4) (supplied)

For 4-2 to 4-7 and 5-1 in the following

steps, refer to the corresponding part of the

instruction manual supplied with the Wall-

Mount Bracket.

1Place the supplied spacers (4-2).

1Remove the four screws from the rear of the

monitor.

2Place the spacers (black) on the screw holes

of the previous procedure.

to AC power outlet

Packing sheet, etc.

Screw

Spacer

7GB

Start-up Guide

2Follow steps 4-3 to 4-4 referring to the

instruction manual supplied with the

Wall-Mount Bracket.

When using only the Wall-Mount

Bracket

Proceed to the following step 5 in this

manual.

When using the Speaker System

Proceed to the following step 3 in this

manual.

3Lift the Lock Bracket to insert the Speaker

System (4-5).

4Fix the Speaker System with two screws

(supplied with the Speaker System).

5See the instruction manual supplied with

the Wall-Mount Bracket, and follow steps

4-6 to 4-7.

6Connect the AC power cord (supplied) to

the AC IN jack (5-1).

When installing the Speaker System

Fix the AC power cord with the two

hooks, and drop the lead down from the

right edge of the monitor.

• When using with an HDMI equipment, also

connect the HDMI cable to the HDMI IN

jack (page 26).

7Follow the instruction manual supplied

with the Wall-Mount Bracket to continue

installing this product on the wall.

• You cannot connect the cables to the monitor

after it is wall-mounted.

• When moving the monitor, lift it with a soft

cloth underneath to prevent damage. Do not

hold the speaker.

Mounting Bracket

Speaker System

Lock Bracket Insert to the joint of

the monitor

This part goes on top of the Mounting Bracket

Screws

AC IN

to AC power

outlet

8GB

3: Connecting an antenna/

Set Top Box/recorder (e.g.

DVD recorder) to the Media

Receiver

Connecting an antenna

Connecting a Set Top Box/recorder (e.g.

DVD recorder) with component video

Connecting a Set Top Box/recorder (e.g.

DVD recorder) with HDMI

• You can also connect equipment to the HDMI

input on the back side of the monitor.

Connecting the media receiver to the

AC power outlet

• Make sure to secure the AC power cord.

Media receiver

Antenna cable

(not supplied)

COMPONENT IN

RLP

Set Top Box/recorder (e.g. DVD recorder)

Component

video cable

(not

supplied)

Media receiver

Audio cable

(not supplied) Antenna

cable

(not supplied)

Antenna cable

(not supplied)

Set Top Box/recorder (e.g. DVD recorder)

HDMI cable

(not supplied)

Media receiver

Antenna cable

(not supplied)

Antenna cable

(not supplied)

DCIN 18V

Media receiver

to AC power

outlet

9GB

Start-up Guide

4: Preventing the monitor

from toppling over (only

when placing on a TV stand)

1Remove the screw from the Table-Top

Stand.

2Secure the Stand Support adaptor to the

Table-Top Stand.

3Attach a rope or chain to the adaptor, and

then secure it to the TV stand (not

supplied). Make sure that there is no

excess slack in the rope or chain.

1Install a wood screw (4 mm in diameter, not

supplied) in the TV stand.

2Install a machine screw (M6 × 12-15, not

supplied) into the screw hole of the monitor.

3Tie the wood screw and the machine screw

with a strong cord.

10 GB

5: Performing the initial set-

Inserting batteries into the remote

• Observe the correct polarity when inserting

batteries.

• Do not use different types of batteries together or

mix old and new batteries.

• Dispose of batteries in an environmentally

friendly way. Certain regions may regulate the

disposal of batteries. Please consult your local

authority.

• Handle the remote with care. Do not drop or step

on it, or spill liquid of any kind onto it.

• Do not place the remote in a location near a heat

source, a place subject to direct sunlight, or a

damp room.

Establishing the wireless

communication between the unit

• This unit should be placed in the same room.

• Keep about 30 cm to 20 m distance between the

monitor and media receiver when installing.

• Keep clear the area between the monitor and

media receiver. Otherwise the picture may

deteriorate.

• Rearrange the installation position of the monitor

and media receiver in case of fuzzy picture.

• Do not place either unit on a metallic rack.

• Do not use two units or more at the same time in

an area of radio interference.

1Press 1to turn on the unit power.

2Check the LINK indicator on the media

receiver.

If wireless communication between the

media receiver and monitor is established,

this indicator lights up.

Performing the initial set-up

When you switch on the unit for the first

time, the Language menu appears on the

screen.

Push and lift the cover to open.

POWER button

Media receiver

Monitor

POWER button

LINK

LINK indicator

1-9

MONITOR

HDMI 2HDMI 1

HDMI

HDMI 3

THEATRE

SYNC MENU

AUDIO

EXT

VIDEO COMPO-

NENT

Inhaltsverzeichnis

Sprachen:

Andere Sony LCD-Fernseher Handbücher

Sony

Sony BRAVIA KDL-46BX421 Bedienungsanleitung

Sony

Sony KDL-32BX326 Bedienungsanleitung

Sony

Sony KV-27FS16 - 27" Trinitron Wega Benutzerhandbuch

Sony

Sony XBR-49X835D Bedienungsanleitung

Sony

Sony BRAVIA KDL-50W65xA Bedienungsanleitung

Sony

Sony KDL-26S3000LI - 26" Bravia™ S-series Digital Lcd Television;... Bedienungsanleitung

Sony

Sony BRAVIA 4-178-827-15(1) Bedienungsanleitung

Sony

Sony KDL-22BX300 - Bravia Bx Series Lcd... Bedienungsanleitung

Sony

Sony BRAVIA KDL-32L4000 Bedienungsanleitung

Sony

Sony Bravia KDL-40D3500 Bedienungsanleitung

Sony

Sony KDL-32EX700 - Bravia Ex Series Lcd... Bedienungsanleitung

Sony

Sony BRAVIA KDL-37M3000 Bedienungsanleitung

Sony

Sony Bravia XBR-84X900 Bedienungsanleitung

Sony

Sony KDL-42V4100 Bedienungsanleitung

Sony

Sony BRAVIA KDL-46XBR9 Bedienungsanleitung

Sony

Sony BRAVIA KDL-32BX330 Bedienungsanleitung

Sony

Sony KDL-32S2400 - 32" Bravia Lcd Hdtv Bedienungsanleitung

Sony

Sony BRAVIA KD-43X7052 Betriebsanleitung

Sony

Sony Bravia KDL-52EX707 Bedienungsanleitung

Sony

Sony BRAVIA KDL-40XBR2 Bedienungsanleitung

Sony

Sony KDL-46HX750 Bedienungsanleitung

Sony

Sony BRAVIA KDL-32L4000 Bedienungsanleitung

Sony

Sony Bravia XBR-65HX925 Bedienungsanleitung

Sony

Sony KDL-32N4000 - 32" Class Bravia N Series Lcd... Bedienungsanleitung

Beliebte LCD-Fernseher Handbücher anderer Marken

LG 32LC4R* Bedienungsanleitung

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Toshiba

Toshiba 57X3000A Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Philips

Philips 47PFL7704D Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Philips

Philips 42PF7520D/79 Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung

Dynex

Dynex DX-L40-10A Kurzanleitung