Sony NSP-1 Betriebsanleitung

Sony Electronics Inc.

www.sony.com/nsp1

Sony NSP-1 / BZNP-D1 Tutorials

Revision 1.10 2/11/2005

Sony NSP-1 / BZNP-D1 Tutorials

- 2 -

Contents

1. Scope

2. NSP-1 related products

3. Update NSP-1 and BZNP-D1 when necessary

4. Equipment and Configuration

5. Setup of NSP-1

6. Setup of BZNP-D1

7. Ingest content

8. Create a playlist

9. Scheduling

10. Content Production guidelines

11. FAQ

12. Appendix

(A) Video file conversion with Canopus ProCoder Express

(B) Video file conversion with Discreet Cleaner XL

Sony NSP-1 / BZNP-D1 Tutorials

- 3 -

1. Scope

This document describes basic usage of Sony NSP-1 "Digital Signage Player" and BZNP-D1 software.

Please contact "The Product Operations Support Center (POSC)" at (800) 883-6817 about product related

questions. Please download sample content “Content4Tutorials.zip” from www.sony.com/nsp1.

2. NSP-1 related products

Product Name SRP1Description

NSP-1 $1,995 NSP-1 and BZNP-D1 software with 1 player license

BZNP-D1EXD $995

BZNP-D1 software with 10 player license and Canopus ProCoder

Express software

BZNP-DP10 $500 Additional 10 player license

BZNP-DP50 $1,000 Additional 50 player license

Sony NSP-1 is a network appliance (hardware) to play back video, graphic and text content.

Sony BZNP-D1 is system software to ingest content, create a playlist, schedule play out, distribute content and

monitor status. BZNP-D1 can manage up to 210 units of NSP-1. BZNP-D1 software can be purchased as

BZNP-D1EXD, a package product that consists of BZNP-D1 software, 10 player license and Canopus

ProCoder Express software.

Canopus ProCoder Express software can encode almost all types of video file to MPEG2 file that is

compatible with NSP-1.

When you purchase BZNP-D1EXD, you will receive a key code for 10 player license. If you need to manage

more than 10 NSP1s, you can add licenses by purchasing BZNP-DP10 (additional 10 player license) and/or

BZNP-DP50 (additional 50 player license).

3. Update NSP-1 and BZNP-D1 when necessary

This document is described based on NSP-1 (version 2.01) and BZNP-D1 (version 2.01).

Latest firmware of NSP1 and BZNP-D1 software can be downloaded from the following web site.

www.sony.com/nsp1

Please refer to a release note for details.

1as of 12/23/2004

Sony NSP-1 / BZNP-D1 Tutorials

- 4 -

4. Equipment and Configuration

4.1 Number of NSP-1 and software license

Here is a sample of required software license and number of NSP1

# of NSP-1 BZNP-D1EXD BZNP-DP10 BZNP-DP50

1 0 *200

2-10 1 0 0

11-20 1 1 0

21-60 1 0 1

61-110 1 0 2

111-160 1 0 3

161-210 1 0 4

4.2 Sample of system configuration and required equipment

Here is a sample of configuration for a small system.

PC (Hardware)

General spec Nothing special

Graphics/Sound card Microsoft DirectX compatible card is recommended

PC (OS)

OS Microsoft Windows XP professional *3

Direct X Microsoft DirectX 9.1 or later is required *4.

PC (Software)

2BZNP-D1 software w/ 1 player license comes with NSP1, though Canopus ProCoder Express software is not included.

3Sony does not guarantee, but BZNPD1 may run on Windows 2000 when gdiplus.dll is installed.

4How to check the version of DirectX

1. Click START button on Windows

2. Select RUN...

3. Type dxdiag, and click OK

4. Version number will be displayed at the System tab

Sony NSP-1 / BZNP-D1 Tutorials

- 5 -

Web browser Microsoft Internet Explorer 6.0 or later is recommended.

Windows Media Player Microsoft Windows Media Player version 9 or later is recommended

MPEG2 encoding

software

MPEG2 encoding software is required to utilize video file. Sony

certified followings.

- Canopus ProCoder Express 5

- Canopus ProCoder V2.0

- Discreet Cleaner XL

Network

100BT router/switch/hub Nothing special

Ethernet cable Regular straight cable to connect PC and NSP1 via router/switch/hub

Cross over cable to connect PC and NSP1 directly

Display for NSP1

Display Any kind of display with VGA (HD15) interface such as Plasma

display, LCD, or CRT monitor. NSP1 supports following resolutions.

VGA, WVGA (848x480), SVGA and XGA

Display cable VGA cable (HD15)

RS232C cable This is optional. RS232C cable is utilized to control a display.

5Canopus ProCoder Express is included in BZNPD1EXD

Sony NSP-1 / BZNP-D1 Tutorials

- 6 -

5. Set up NSP-1

You need to do followings using web browser.

•Confirm firmware version

•Set IP address of NSP1 if necessary

•Set Date and Time

•Set Screen resolution

Change Network settings of PC

- Start / Settings / Network Connections

- Right click “Local Area Connection” and Select

properties

- Select Internet Protocol (TCP/IP), Click

Properties

- Select “Use the following IP address”

- Enter “192.168.0.100” at IP address

- Enter “255.255.255.0” at Subnet mask

- Click OK, Click OK

- Start / Run…

- Type “cmd” and click OK then “cmd.exe”

window opens

- Type “ipconfig” and Confirm IP address and

Subnet mask

Confirm network connection

- In the cmd.exe window,

- Type ping 192.168.0.1

- Confirm “Reply from 192.168.0.1”

- When ping fails, please refer to this

foot note6.

Launch Web browser and connect to NSP1

- Launch Web browser such as Internet Explore

- Enter http://192.168.0.1:4980 at the address

- Then a login window is popped up

- Type “NSP1admin” at User name (case sensitive)

- Type “NSP1admin” at Password (case sensitive)

- Click OK

6“192.168.0.1” is factory default. If you are not sure the IP address of NSP1, here is a tip.

A) Change Dip SW-1 at the rear panel “ON”, and then turn on NSP1. IP address will be displayed after “Loading3…..”.

Then you can change Dip SW-1 “OFF”, and NSP1 resumes booting process.

B) Change Dip SW-3 at the rear panel “ON”, and then turn on NSP1. NSP1 will boot with an address of “192.168.0.1”.

Sony NSP-1 / BZNP-D1 Tutorials

- 7 -

Confirm firmware version of NSP1

- Click “System Settings”

- Check the Software Version

- If the Software Version is lower than 2.01, please

update NSP1 referring to a release note at

www.sony.com/nsp1,

Set Date and Time

1. Set Date and Time 7

2. Click Send

Set Display resolution and orientation

1. Set Display settings

Select resolution from VGA, WVGA, SVGA,

XGA and composite 8. WVGA (848x480) is

recommended to drive a plasma display because

square pixel ratio makes it easy to produce

content.

Select Orientation from Landscape or Portrait

(WVGA / Landscape is assumed in the

following trainings.)

2. Click Send

Reboot NSP1

1. Click Reboot

2. Click Reboot

7Time Zone does matter only when NTP is utilized to adjust date and time automatically over network. Currently NSP1

doesn’t support “Daylight Saving Time”. Followings are for normal time. -5 (EST). -6 (CST), -8 (PST).

8There is no simultaneous video output on “Composite video signal” and “Analog RGB - VGA (HD15) signal”

Sony NSP-1 / BZNP-D1 Tutorials

- 8 -

6. Set up BZNP-D1

6.1 Install BZNP-D1 software

BZNP-D1 can be downloaded from www.sony.com/nsp1. BZNPD1 can control only one NSP1 unless a key

code is installed. A 10 players’ key code comes with BZNPD1EXD. Install it as followings.

1. Launch BZNP-D1 software

2. Select Help / License settings from the menu

3. Click Add license

4. Type the key code and click OK

5. Click OK

Install Canopus ProCoder Express, if you purchased BZNPD1EXD. This software installs DirectShow

compatible MPEG2 codec software that is important to ingest MPEG2 video content.

6.2 BZNP-D1 GUI

6.3 Set up BZNP-D1

Following setups are required on BZNPD1 software before you do a regular operation.

•Register NSP1

•Create a group

•Setup a group

•Create a template

•Assign NSP1 to a group

6.3.1 Register NSP1

1. Select Setup / Group Setup

2. Click “New NSP1”

3. Enter “NSP-A” at NSP1 name

4. Enter “192.168.0.1” at IP address

5. Enter “NSP1user” at Password and Retype

Password if those are blank

6. Click Check Connection if the NSP1 is online

7. Click OK

Sony NSP-1 / BZNP-D1 Tutorials

- 9 -

6.3.2 Create and set up a group

1. Click “New Group” in Group Setup window

2. Enter “Tutorials” at “Group name”

3. Select “10:00:00” and “18:00:00” at Playout Time

4. Leave “00”00” at Sleep Time

5. Select “WVGA” at Screen Resolution and “Landscape”

at Screen Orientation (These must match to settings on

NSP1.)

6.3.3 Create a Template

1. Click “Template Settings” in Edit Group window

2. Type “Tutorials” at Template

3. Enter following numbers at X, Y, W and H

4. Click OK in “Template Settings” window

5. Click OK in “Edit Group” window

6.3.4 Assign NSP1 to a group

1. Click “Tutorials” on the right side in

the “Group Setup” window

2. Click “NSP-A” on the left side

3. Click Add

4. Close this window

6.4 Group

In order to simplify operations, creating playlists, scheduling playout and distributing content are based on

groups. If you do NOT purchase BZNPD1EXD and install a license, you can create only one group.

6.5 Template

NSP1 can play back several types of content with layered. In order to make authoring easy, you can create a

template of content arrangement in advance, and you can apply it to each group of NSP1 as a default.

It is not mandatory to create a template and assign it to a group, because you can change display arrangement

while you create a playlist, but you will realize that a template can save your time to create a playlist.

Sony NSP-1 / BZNP-D1 Tutorials

- 10 -

7. Ingest content

The following procedures are based on WVGA / Landscape setting. Please refer to chapter 5 and 7 for details.

Sample content that is utilized in these trainings can be downloaded as “Content4Tutorials.zip” from

www.sony.com/nsp1. Please unzip the file onto your local hard disk drive.

You can ingest content by dragging it from Explorer to upper window of BZNPD1 software. Please note that

BZNPD1 software does NOT copy content but creates a link to the original file. So if you have content on CD-

ROM or DVD-ROM, it is suggested to copy them to a local hard disk drive in advance.

Ingest Video content

1. Select Video tab

2. Drag AWSG500.mpg and J30.mpg files in video folder from Explorer and drop to the Content

Management window

3. In case Duration shows “00:00:00”9, double click the duration and enter “00:00:15”

Preview Video content

1. Right click the video content and select “Send to NSP1 and Preview”

Ingest Graphics content

1. Select Graphics tab

2. Drag BG-AWSG.bmp, BG-HDV.bmp, BG-NH-A.bmp and BG-NH-B.bmp files in Graphics folder

from Explorer and drop to the Content Management window

Ingest Flash content

1. Select Flash tab

2. Drag LED_CLOCK.swf file in Flash folder from Explorer and drop to the Content Management

window

9Duration may show “00:00:00” in the following case.

A) Direct Show compatible MPEG2 codec is not installed. (Canopus ProCoder Express includes this.).

B) Direct Show incompatible codec has higher "merit" value

C) MPEG4 (.mp4) file is ingested

Andere Handbücher für NSP-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Medienplayer Handbücher

Sony

Sony DSX-A400BT Bedienungsanleitung

Sony

Sony FMP-X5 Bedienungsanleitung

Sony

Sony XDS-PD1000C Bedienungsanleitung

Sony

Sony HAP-S1 Bedienungsanleitung

Sony

Sony DFP-R3000 Bedienungsanleitung

Sony

Sony DSX-A202UI Bedienungsanleitung

Sony

Sony NSZ-GX70 Bedienungsanleitung

Sony

Sony NWZ-S515 Bedienungsanleitung

Sony

Sony Betacam SX DNW-A22 Bedienungsanleitung

Sony

Sony Walkman NWZ-S754 Bedienungsanleitung

Sony

Sony SMP-NX20 Bedienungsanleitung

Sony

Sony pavit AZ-BS1 Bedienungsanleitung

Sony

Sony NSZ-GS8 Bedienungsanleitung

Sony

Sony CLIE PEG-N710C Bedienungsanleitung

Sony

Sony NW-A100TPS Bedienungsanleitung

Sony

Sony DVP-NW50 - In-wall Dvd Player Benutzerhandbuch

Sony

Sony NW-ZX706 Bedienungsanleitung

Sony

Sony Walkman NW-E303 Bedienungsanleitung

Sony

Sony RM-PP1 Bedienungsanleitung

Sony

Sony DSX-A35U Bedienungsanleitung

Sony

Sony NSZ-GS7 Bedienungsanleitung

Sony

Sony HAP-S1 Bedienungsanleitung

Sony

Sony NSZ-GS7 Bedienungsanleitung

Sony

Sony XAV-W650BT Bedienungsanleitung

Beliebte Medienplayer Handbücher anderer Marken

Visual Land

Visual Land Impulse Bedienungsanleitung

limHD

limHD 200i Bedienungsanleitung

Transcend

Transcend DMP10 Bedienungsanleitung

Philips

Philips GoGear Muse SA2MUS08 Bedienungsanleitung

Fantec

Fantec MM-HDRL Bedienungsanleitung

Dune HD

Dune HD Duo 4K Bedienungsanleitung

IAdea

IAdea HMP-505S Bedienungsanleitung

Camos

Camos MMS-1000 Bedienungsanleitung

Energy

Energy 75 Series Bedienungsanleitung

Z3 Technology

Z3 Technology DME-03 Bedienungsanleitung

Meicheng

Meicheng HD-1080K12 Bedienungsanleitung

DENAFRIPS

DENAFRIPS ARCE Bedienungsanleitung

Topaz

Topaz CMS Media Player Gebrauchsanweisung

InFocus

InFocus LightCast Bedienungsanleitung

IconBiT

IconBiT XDS1003D Bedienungsanleitung

Quanmax

Quanmax QDSP-2090 Series Bedienungsanleitung

Samsung

Samsung MP-80S Bedienungsanleitung

Trigon Elektronik

Trigon Elektronik CHRONOLOG Bedienungsanleitung