Sony UWP-X5 Bedienungsanleitung

Wireless Microphone

Package

2-698-941-31 (1)

UWP-X5

Operating Instructions

Before operating the unit, please read this manual

thoroughly and retain it for future reference.

Table of Contents

Configuration of the Package ................................................ 4

Features ...................................................................................5

Precautions ..............................................................................5

Parts Identification .................................................................6

Body-pack transmitter (UTX-B1) .....................................6

Diversity tuner module (URX-M1) ..................................8

Head-set type microphone (supplied) ...............................8

Power Supply ..........................................................................9

Inserting the batteries ........................................................9

Battery indication ............................................................10

Attachment and Installation Procedures ............................11

Attaching the supplied accessories to the body-pack

transmitter (UTX-B1) .....................................................11

Installing a diversity tuner module (URX-M1) ..............13

Settings ...................................................................................15

Setting the transmission channel (UTX-B1 only) ..........15

Setting the reception channel (URX-M1 only) ...............15

Detecting and selecting the available channels

automatically (URX-M1 only) .......................................17

Setting the attenuation level of the audio input (UTX-B1

only) ................................................................................17

Resetting the accumulated battery use time indication

(UTX-B1 only) ...............................................................18

Setting the RF output power level (UTX-B1 only) ........18

Operation ...............................................................................19

System Configuration........................................................... 20

Error Messages ..................................................................... 21

Troubleshooting .................................................................... 22

Specifications .........................................................................24

Appendix................................................................................ 26

Wireless microphone system frequency list ...................26

4Configuration of the Package

Configuration of the Package

The UWP-X5 consists of a body-pack transmitter (UTX-B1), a diversity tuner module (URX-

M1) and their accessories. By installing the tuner module into the tuner base unit or the

powered mixer, the system construction to meet the desired purpose of use and required

system scale becomes possible.

Body-pack transmitter (UTX-B1) (1) Diversity tuner module (URX-M1) (1)

Supplied accessories

Head-set type microphone (1)

Clip (1)

Operating Instructions (1)

Belt clip (1)

Headband (1)

Features / Precautions

Features

The UWP-X5 Wireless Microphone

Package consists of a transmitter (body-

pack transmitter (UTX-B1)), a receiver

(diversity tuner module (URX-M1)), and

the accessories. The UWP-X5 can be used

with the tuner base unit or the powered

mixer for AV presentations.

The UWP-X5 is not compatible with

conventional WRT series transmitters,

WRR series tuners, or WRU series tuner

units.

The featured components of the package are

described below.

Body-pack transmitter (UTX-

B1)

This is a small and lightweight transmitter

with a crystal-controlled PLL (phase lock

loop) synthesized system and a BMP-type

microphone input connector. The RF power

output can be set at 10 mW or at 2 mW.

Diversity tuner module (URX-

M1)

This tuner module can be incorporated into

the MB-X6 Tuner Base Unit or SRP-X500P

Powered Mixer.

Head-set type microphone

(supplied)

This electret condenser microphone is

equipped with the omni-directional capsule

to obtain sound with clarity and quality, ear

clip to easily wear on either ear, and flexible

boom allowing you to finely adjust the

position and angle of the microphone.

Precautions

• The UWP-X5 units must be used within

a temperature range of 0°C to 40°C (32°F

to 104°F).

• Operating the UWP-X5 units near

electrical equipment (motors,

transformers, or dimmers) may cause it to

be affected by electromagnetic induction.

Keep the UWP-X5 units as far from such

equipment as possible.

• The presence of the lighting equipment

may produce electrical interference over

the entire frequency range. Position the

UWP-X5 units so that interference is

minimized.

• To avoid degradation of the signal to-

noise ratio, do not use the UWP-X5 units

in noisy places or in locations subject to

vibration, such as the following:

- near electrical equipment, such as

motors, transformers or dimmers

- near air conditioning equipment or

places subject to direct air flow from

an air conditioner

- near public address loudspeakers

- where adjacent equipment might

knock against the tuner

Keep the UWP-X5 units as far from such

equipment as possible or use buffering

material.

• Clean the surface and the connectors of

the UWP-X5 units with a dry, soft cloth.

Never use thinner, benzene, alcohol or

any other chemicals, since these may mar

the finish.

Note

6Parts Identification

Parts

Identification

Body-pack transmitter

(UTX-B1)

aAntenna

bAudio input connector

Connect the supplied head-set type

microphone here.

cPower indicator

Lights up red when the transmitter is tuned

on.

To prevent electromagnetic

interference from portable

communication devices

The use of portable telephones and

other communication devices near

the UWP-X5 products may result in

malfunction and interference with

audio signals. It is recommended that

portable communication devices near

the UWP-X5 products be turned off.

Parts Identification

dDisplay section

AAF (audio frequency) indication

Appears whenever the input audio signal is

stronger than the reference level.

BRF (radio frequency) indication

Appears during signal transmission from

the antenna.

CRF (radio frequency) level

indication

Shows the RF output level setting.

For details, see “Setting the RF output power level

(UTX-B1 only)” on page 18.

DBATT (battery) indication

Shows the battery condition.

For details, see “Battery indication” on page 10.

ECH (channel) indication

Shows the transmission channel. Each time

you press the SET button in transmission

mode, the channel indication changes as

follows.

For details, see “Settings” on page 15.

e+ (+ selection) / – (– selection/reset)

buttons

Press these buttons to set the transmission

channel, frequency, or attenuation level of

the input signal.

The “–” button resets the accumulated

battery use time to “00:00”.

fBattery compartment

Accommodates two LR6 (size AA) alkaline

batteries.

For details on how to insert the batteries, see

“Power Supply” on page 9.

gSET button

Press to change and enter display

parameters.

For details, see “Settings” on page 15.

hPOWER switch

Turns the power of the transmitter ON or

OFF.

ABD

AF RF

BATT

Transmission

channel

Transmission

frequency

Accumulated

battery use

time

Attenuation

level of the

input signal

Press

the

SET

button.

8Parts Identification

Diversity tuner module

(URX-M1)

aSET button

Press to change display parameters.

For details, see “Settings” on page 15.

bRF (radio frequency) indicator

The color indicates the strength of the

RF input signal.

On in green: RF input is 25 dBµ*

or more.

Off: RF input is less than 25 dBµ*.

* 0 dBµ = 1 µVEMF

cDisplay section

ARF (radio frequency) indications

The number of dots indicates the RF input

level.

BAF (audio frequency) indication

Appears whenever the output audio signal

is stronger than the reference level.

CGP (group)/CH (channel) indication

Shows the reception channel group and

channel number. Each time you press the

SET button, the channel indication changes

as follows.

For details, see“Settings” on page 15.

d+ (+ selection) / – (– selection/reset)

buttons

Press these buttons to set the reception

channel and frequency.

Head-set type microphone

(supplied)

Reception

channel group

and number

Reception

frequency

Press

the

SET

button.

Power Supply

aEar clip

bCase

cMicrophone cable

dHeadband (supplied)

eConnector (mini phono plug with a

lock mechanism)

fClip (supplied)

gBoom

hCapsule case

Power Supply

This section explains the power supply for

each component.

Diversity tuner module (URX-

M1)

When incorporated into another component

(e.g., MB-X6, SRP-X500P, etc.), the tuner

module draws its power from that

component.

For details on the power supply to the diversity tuner

module, refer to the operating instructions of the

component in which the diversity tuner module is

installed.

Body-pack transmitter (UTX-

B1)

The body-pack transmitter can be powered

by two LR6 (size AA) alkaline batteries for

about six hours of continuous operation (at

25 ºC (77ºF)). Details on inserting the

batteries and the battery condition

indication are given below:

Inserting the batteries

1Slide the latches on both sides of the

transmitter at the same time and open

the battery compartment.

Latch

10 Power Supply

2Align two new LR6 (size AA) alkaline

batteries with the polarity markings

and insert them into the battery

compartment, and then close the cover.

Battery indication

When you turn the power on, the battery

condition is shown by the BATT indication

in the display section.

When the indication in column 4 starts to

flash, replace the batteries with new ones.

Be sure to check the expiration date printed

on the new batteries before using them.

The indicated battery condition may not be

correct if the batteries were not new when

installed. If you plan to use the component

for a long period, it is recommended that

you replace the batteries with brand new

ones.

Notes on battery

Batteries may leak or explode if mistreated.

Be sure to follow these instructions.

• Be sure to install the batteries with the

correct polarity.

• Always replace the two batteries

together.

• Do not use different types of batteries or

old and new one together.

• The batteries are not rechargeable.

• When not using the component for a long

period of time, remove the batteries to

avoid leakage. If the batteries do leak,

clean all leakage from the battery

compartment and the component.

Leakage left in the compartment and the

component may cause poor battery

contact. If there seems to be poor battery

contact, consult your Sony dealer.

BATT

indication

Battery status

1Lights

Good

2Lights

Less than 50%

charged

3Lights

Less than 20%

charged

4 Flashes Almost drained

Note

Andere Handbücher für UWP-X5

Inhaltsverzeichnis

Andere Sony Mikrofonsystem Handbücher

Sony

Sony UWP-D21 Bedienungsanleitung

Sony

Sony DWZB70HL Bedienungsanleitung

Sony

Sony WRT-847B Bedienungsanleitung

Sony

Sony UWP-V1 Bedienungsanleitung

Sony

Sony URXM2/3032 Bedienungsanleitung

Sony

Sony UWP-D21 Bedienungsanleitung

Sony

Sony DWZM50 Bedienungsanleitung

Sony

Sony UWP-V1 Bedienungsanleitung

Sony

Sony IPELA PCS-G70 Bedienungsanleitung

Sony

Sony DWZ-B50GB Bedienungsanleitung

Sony

Sony DWM02/14 Bedienungsanleitung

Sony

Sony DWZB30GB Bedienungsanleitung

Sony

Sony UTX-H2/U3032 - UWP Series Handheld... Bedienungsanleitung

Sony

Sony UWP-D11 Bedienungsanleitung

Sony

Sony UWP-C1 Bedienungsanleitung

Sony

Sony UWP-V1 Bedienungsanleitung

Sony

Sony DWZB30GB Bedienungsanleitung

Sony

Sony DWZB30GB Bedienungsanleitung

Sony

Sony DWM02/14 Bedienungsanleitung

Sony

Sony DWZM50 Bedienungsanleitung

Sony

Sony UWPV6/4244 Bedienungsanleitung

Sony

Sony DWZB70HL Bedienungsanleitung

Sony

Sony DWZM50 Bedienungsanleitung

Sony

Sony WRT-810A Bedienungsanleitung

Beliebte Mikrofonsystem Handbücher anderer Marken

Paso

Paso R824 Bedienungsanleitung

Naxa

Naxa NAM-982 Bedienungsanleitung

Motorola

Motorola PMNN4461 Bedienungsanleitung

Xvive

Xvive U3 Bedienungsanleitung

Tekon

Tekon DUOS Bedienungsanleitung

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Bedienungsanleitung

Devine

Devine WMD-IE Bedienungsanleitung

LG LF-D7150 Bedienungsanleitung

GE S768DAV Bedienungsanleitung

LD U305 HBH 2 Bedienungsanleitung

Chainway

Chainway URA8 Bedienungsanleitung

ORATOR

ORATOR D860TD Bedienungsanleitung

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Bedienungsanleitung

Alpha Technologies

Alpha Technologies RBMS Bedienungsanleitung

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Bedienungsanleitung

Shure

Shure UA844 Bedienungsanleitung

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Bedienungsanleitung

Pyle

Pyle PDWM5000 Bedienungsanleitung