Sony Trinitron CPD-1302 Bedienungsanleitung

SONY

TRINITRON®

Character Display

CPD·1302

Operating Instructions

page

Mode d'emploi page 14

Owner's Record

The model and serial numbers are located at the rear. Record the serial

number in the space provided below. Refer to these numbers whenever

you call upon your Sony dealer regarding this product.

Model No. CPD-1302 Serial No.

WARNING

To prevent fire

shock hazard, do not expose the unit

rain

moisture.

Dangerously high voltages are present inside the unit.

not open the cabinet. Refer servicing

qualified

personnel only.

INFORMATION

This equipment generates and uses radio frequency energy and if not

installed and used properly, that is, in strict accordance with the manufac·

turer's instructions, may cause interference to radio and television recep-

tion. It has been type tested and found to comply with the

limits

for a

Class B computing device in accordance with the specifications in Sub-

part J

Part

FCC Rules, which are designed to provide reasona·

ble protection against such interference

a residential installation.

However, there is no guarantee that interference will not occur in a par·

ticular installation. If this equipment does cause interference to radio or

television reception, which can

determined

turning the equipment

off

and on, the user is encouraged to try to correct the interference

one or more

the following measures:

Reorient the receiving antenna

Relocate the equipment with respect to the receiver

Move the equipment away from the receiver

Plug the equipment into a different outlet so that equipment and

receiver are on different branch circuits.

If necessary, the user should consult the dealer or an experienced

radio/television technician for additional suggestions. The user may find

the following booklet prepared by the Federal Communications Commis·

sion helpful:

"How

to identify and Resolve Radio·TV Interference Problems." This book·

let is available from the

U.S.

Government Pri(1ting Office, Washington,

20402, Stock No. 004·000-00345-4.

A shielded interface cable such as the SMF-series recommended on page

8 must be used with this equipment.

For the customers

Canada

This

apparatus

complies

with

the

Class

limits

for

radio

noise

emis-

sions

set

out

Radio

Interference

Regulations.

The CPD-1302 is a high resolution character display designed for use with

microcomputers.

character generators having either analog or

digital

RGB

output.

Features

• Super Fine Pitch Trinitron

character

display

with

an anti-glaring dark

screen.

• An RGB terminal which

allows

equipment

with

either analog

digi-

tal RGB

output

to be connected.

•

Compatible

with

the

IBM 3270

and

IBM

PC, AT,

and

PS/2

microcomputers

using

the

CGA, EGA, PGA,

MDA

and

VGA.

Table of Contents

Precautions .........................................................................................._...... 4

Location

and Function

Controls .........................................................5

Connections

...............................................................................................8

Use

theTirt-Swivel ................................................................................9

Specifications

..........................................................._................................

Timing Charts................................................_...........................................

Precautions

safety

• Operate the unit only on 120V

AC,

Hz.

• Should any liquid or solid object fall into the cabinet, unplug the unit

and have it checked by qualified personnel before operating it any

further.

• Unplug the unit from the wall outlet if it is not to

used for several

days.

• To disconnect the

power cord, pull it out by the plug. Never pull

the cord itself.

installation

• Allow adequate air circulation to prevent internal heat build·up.

Do not place the unit on surfaces (rugs, blankets, etc.) or near materi-

als (curtains, draperies) that may block the ventilation holes.

•

not install the unit in a location near heat sources such as radia-

tors or air ducts,

in a place subject to direct sunlight, excessive dust,

mechanical vibration or shock.

cleaning

To keep the unit looking brand-new, periodically clean it with a soft cloth.

Stubborn stains may

removed with a cloth lightly dampened with a

mild detergent solution. Never use strong solvents such as thinner or ben-

zine, or abrasive cleansers since these will damage the cabinet. As a safe-

ty precaution, unplug the unti before cleaning it.

repacking

not

throwaway

the carton and packing materials. They make

ideal

container in which to transport the unit. When shipping the unit to another

location, repack it as illustrated on the carton.

If you have any questions-about this unit, contact your authorized Sony

dealer.

Location and Function

Controls

[II POWER switch and indicator (green)

display

stand

(optional)

To turn on the power

the unit, press this

switch

to ON. The

indio

cator

will light up.

turn

off

the unit, press towards OFF.

80N

OFF

IT]

PICTURE control

Adjusts

the

contrast.

Turn

downwards

increase

contrast,

or up·

wards

for

less

contrast.

[I] BRIGHTNESS control

Normally keep this control at the center detent position. For a brighter

display, turn this knob downwards,

for a darker display, turn it

upwards.

Push upward

remove panel.

mH SHIFT (horizontal shift) control

Turn this control to center the displays of microcomputers, charac·

ter generators, etc. that are shifted toward the left or right side of

the screen.

mV SHIFT (vertical shift) control

Turn this control to eliminate any shifting in the vertical direction.

m H

SIZE

(horizontal size) control

Turn this control to adjust the horizontal

size.

[]]

V SIZE (vertical size) control

Turn this control to adjust the vertical size.

[!]

RGB input selectors

Depending on the RGB

output

the equipment you have connect-

ed, set these switches to one

the following four positions.

ANALOG: For

microcomputers

having analog

RGB

output, such

as those using the PGA card.

The position

the left switch

has no effect when the right

switch

set

ANALOG.

NORM-DIGITAL: For microcom-

puters having

TIL

RGB output,

such as the IBM

3270.

D1-DIGITAL:

For

microcom-

puters having

TIL

RGB and I

signal output, such as the IBM

PC,

AT and

using the stand-

ard color graphics card.

D2-DIGITAL: For

TIL

graphics

cards on the IBM

PC,

AT and

XT.

(automatic adjustment

be-

tween

EGA,

CGA

a[1d

MQA)

I I I

NORM 01

I I I

NORM

I I I

NORM

I I I

NORM 01

111

RGB

(input)

connector

(9-pin D-sub)

DIGITAL

101

ANALOG

DIGITAL

[g[J

ANALOG

DIGITAL

ANALOG

DIGITAL

[g[J

ANALOG

Allows a microcomputer having either analog or digital

RGB

output

connected.

Refer to page 8.

[1QJ

connector

Connect to the AC

outlet

with

the

supplied

AC power cord.

Connections

Use an appropriate optional color

monitor

cable

with

9-pin D-sub con-

nectors shown in the table.

sure to turn the power

the unit

off

before making any connections.

Equipment that can Monitor cable Position of

RGB

connected (optional) input selectors

used

the CPD·1302

IBM

PC,

AT,

SMF·512C D1-DIGITAL

with CGA

IBM

PC,

AT,

SMF-512C I D2-DIGITAL

with EGA, CGA, MDA

IBM 3270 SMF·514 NORM·DIGITAL

IBM

PC,

AT,

SMF·513 ANALOG

with

PGA

Rear

the CPD·1302

Microcomputer

Set

appropriate .

positions.

'(;0=

-~.

[]I'"

",-,

-""~--':-~---~

'---

___

to a

optional

~olor

monitor

cable

power wall

cord (supplied) outlet

1 Align the plug with the receptacle. 2 Plug in and tighten the

screws.

----

' , I

: To d:sconnect the plug, loosen the screws.

Note

The

monitor

cable should arrange the RGB output signals

the con-

nected equipment so that they match the signal assignment of the

RGB

connector

this unit (See page

11).

If you are not sure whether you

can use your computer or character generator with CPD·1302 or which

monitor

cable

use, consult your authorized Sony dealer.

Use of the Tilt-Swivel

With the optional Sony SU·542 tilt·swivel,

this

unit can

adjusted to

viewed at your desired angle within 90° horizontally and 15° vertically.

For details, read the instructions of the tilt·swivel.

Specifications

Picture tube

Viewable Pixels

Scanning frequency

Input

Power requirements

Power consumption

Dimensions

Weight

Supplied accessory

Optional

accessories

Super Fine Pitch Trinitron color tube

13-inch picture tube measured diagonally

degree deflection

Anti-glaring dark screen

Useful screen 274mm x 207mm

Phosphor

P22

Phosphor pitch 0.26mm

900 x 560

Vertical sync signal frequency:

50 -100

Horizontal sync signal frequency:

15.0

-34.0 kHz

AGB input (D-sub 9 pin) (Analog and

TTL

available)

120V AC, 50/60

W (maximum)

360

x 300 x 425 mm (w/h/d)

(14'/4

117/8

3/4 inches)

including projecting parts

14.5

(32

Ib)

AC power cord

(1)

Monitor cable (9·pin

....

9·pin)

SMF-512C

SMF-513

SMF-514

Tilt/Swivel SU-542

Display

Stand

Design and specifications subject

change without notice.

Andere Handbücher für Trinitron CPD-1302

Inhaltsverzeichnis

Sprachen:

Andere Sony Monitor Handbücher

Sony

Sony SS-SP50FW Bedienungsanleitung

Sony

Sony Trinitron CPD-E500 Bedienungsanleitung

Sony

Sony Trinitron CPD-100GS Gebrauchs- und Wartungshandbuch

Sony

Sony MFM-HT75W Bedienungsanleitung

Sony

Sony Multiscan GDM-2036S Bedienungsanleitung

Sony

Sony Trinitron PVM-3230 Bedienungsanleitung

Sony

Sony LMD-X310MD Bedienungsanleitung

Sony

Sony SDM-V76D Bedienungsanleitung

Sony

Sony Trinitron HMD-A100 Bedienungsanleitung

Sony

Sony LUMA LMD-1751 W Bedienungsanleitung

Sony

Sony Trinitron HMD-A200 Bedienungsanleitung

Sony

Sony MCM-2250NB Bedienungsanleitung

Sony

Sony GDM-90W01T5 Bedienungsanleitung

Sony

Sony FWD-42PX2 Benutzerhandbuch

Sony

Sony SDM-HS93/H Bedienungsanleitung

Sony

Sony CPD-100SF Bedienungsanleitung

Sony

Sony SDM-S74 Bedienungsanleitung

Sony

Sony XVM-F65 Produkthandbuch

Sony

Sony PVM-2541 PVM-1741 PVM-740 LMD-2451W LMD-1751W LMD-4251TD LMD-2451TD LMD-2341W LMD-2041W LMD-1541W LMD-940W LMD-1530W LMD-2110W... Bedienungsanleitung

Sony

Sony Trinitron CPD-E200 Bedienungsanleitung

Sony

Sony ELF-SR2 Bedienungsanleitung

Sony

Sony KV-32FS210 Bedienungsanleitung

Sony

Sony PR711-711T-E Bedienungsanleitung

Sony

Sony KV-24FS100 - 24" Fd Trinitron Wega Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung