Sony Trinitron CRT Monitor Bedienungsanleitung

English8188

¨¨¨

English

TABLE OF CONTENTS

SAFETY INSTRUCTIONS .................................................................. 2

INTRODUCTION ............................................................................. 4

Package Contents ..................................................................... 4

Installing or Removing the Tilt/Swivel Base ............................ 5

Specifications ........................................................................... 6

Recommended Use of the Monitor .......................................... 7

CONTROLS AND ADJUSTMENTS ................................................... 8

Front User Controls. ................................................................ 8

"General" ................................................................................. 9

"Picture" .................................................................................. 9

"Geometry" .............................................................................. 9

"Color" ..................................................................................... 9

"Advance" .............................................................................. 10

"Porperty" .............................................................................. 10

"Signal" .................................................................................. 11

Contrast ................................................................................. 11

Energy Declaration ................................................................ 11

TECHNICAL INFORMATION ......................................................... 12

Compatibility ......................................................................... 12

Pin Assignment ............................................................... 12

Preset Timing Chart ........................................................ 13

TROUBLESHOOTING .................................................................... 14

DIMENSION .................................................................................. 15

PLUG & PLAY: DISPLAY DATA CHANNEL (DDC) ........................ 16

MANUFACTURER'S LIMITED WARRANTY. .................................. 16

¨¨¨

English

SAFETY INSTRUCTIONS

1. Please read carefully all of these instructions below and keep the manual

for later use.

2. Please install the swivel base for this product before using it.

3. The voltage ratings and the rated frequency are on the overlay centered

at the rear side of this product. Do not connect with any other sources

of voltage or frequency, and, please follow all warnings and instructions

marked on the product.

4. Unplug this product from the wall outlet before cleaning and use a

damp cloth to clean it. Do not use liquid cleaners or aerosol cleaners.

5. Do not expose this product to rain or moisture.

6. Do not place this product on an unstable cart, stand, or table. The

product may fall, causing serious damage to the product.

7. Do not block or cover ventilating openings with cloth or other material.

Neither should this product be placed near or over a radiator or a heat

unless proper ventilation is provided.

8. This product is equipped with a 3-wire grounding model plug. This

plug will only fit into a grounding-model power outlet. This is a safety

feature. If you are unable to insert the plug into the outlet, contact

your electrician to replace your obsolete outlet. Do not defeat the safety

purpose of the grounding-model plug. Choose a Tandem Blade

attachment plug configuration power cord for 230V AC input.

Due to the safety requirements of different areas, please select a suitable

power cord according to the following rules, in addition to the electric

rating:

A. Northern America area: Please select a UL listed and CSA certified

power cord.

B. Germany: Please select a VDE certified power cord.

C. Nordic countries: Please select a power cord certified by SEMKO,

NEMKO, DEMKO or FIMKO.

D. The other areas: Please select a power cord suitable to the local

power system and power outlet.

English8388

¨¨¨

English

SAFETY INSTRUCTIONS

Usually when this product is sold a suitable power cord is provided by

the manufacturer. However, this product is sometimes resold or

transported to another area with a different power system and safety

requirements. Please pay attention to the selection of a suitable power

cord.

The plug on the power cord is intended to serve as the disconnect

device, the socket-outlet shall be installed near the equipment and

shall be easily accessible.

9. Do not allow anything to rest on the power cord. Do not locate this

product where persons can walk on the cord.

10. Never push objects of any kind into this product through cabinet slots

as they may touch dangerous voltage points or short out parts that

could result in the risk of fire or electric shock. Never spill liquid of

any kind on the product.

11. Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points, or other risks.

Refer all servicing to service personnel.

12. Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions.

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. If when the operating instructions are followed, the product does

not operate normally, adjust only those controls that are covered

by the operating instructions since improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified technician to restore the product to normal operation.

E. If the product has been dropped or the cabinet has been damaged.

F. If the product exhibits a distinct change in performance, indicating

a need for service.

¨¨¨

English

Introduction

The monitor is a multiple frequency high-resolution color monitor for IBM

compatible PC's or Macintosh and workstation systems. The monitor is

equipped with microprocessor based intelligence and multiple frequency

scanning capability, allowing it to provide maximum compatibility for various

system platforms.

The monitor uses the latest screen technology including a 0.24mm AG

Trinitron® CRT to display crisp text and vivid color graphics. The full-function

digital control and On-Screen Display (OSD) system provides easy adjustment

of image geometry and color settings for different display modes with the

precision of a fixed frequency monitor.

The monitor also has full ergonomic features. In addition to the friendly controls

and user comfort features, the emission level of the electric and magnetic field

is kept low to meet the Swedish MPR II and TCO standards.

The monitor is also equipped with energy saving functions; it is compatible

with the VESA power saving standards.

INTRODUCTION

Package Contents

The following lists all of the items included in the monitor package box. Please

save the original box and packing materials for future transportation or shipment

of the monitor.

Rear View

Front View

User's Manual

Power Cord

PR705F

User's Manual

English8588

¨¨¨

English

Installing or Removing the Tilt/Swivel Base

1.Turn off the system and all attached peripherals.

2.Carefully set the monitor upside down.

Remove the Tilt/Swivel Base:

1.Squeeze and hold the latches.

2.Pull the tilt/swivel base to the rear of the monitor and lift to remove the

base.

Installing the Tilt/Swivel Base:

1.Align the base with the slots on the bottom of the monitor and insert the tilt/

swivel base into the slots.

2.Push the tilt/swivel base firmly toward the front of the monitor until the

latches click into the locked position.

INTRODUCTION

Install Remove

¨¨¨

English

INTRODUCTION

Specifications

Note: Specifications are subject to change without notice.

Color Picture Tube 43.1 cm / 17" (16" viewable screen size) diagonal

measurement, 90 degree deflection, Trinitron® CRT,

anti-glare, anti-reflection, anti-static

AG Pitch 0.24 mm, (at center)

Input Signal Video: 0.7 Vp-p/75 ohm, analog positive

Sync: Separate Sync.: TTL Level

Horizontal Sync.: positive/negative

Vertical Sync.: positive/negative

Composite Sync.: TTL Level, positive/negative

Scan Frequency Horizontal: 30 to 85 kHz automatically

Vertical: 50 to 160 Hz automatically

Max. Resolution 1600 x 1200 pixel, non-interlaced

Display Colors Analog input, unlimited colors

Pixel Rate 175.5 MHz

Plug & Play DDC 1 / DDC 2B

Power Supply 100-120 VAC/200-240 VAC, 50/60 Hz (automatically)

Power Consumption 110W max.

Dimensions 418(W) x 430(H) x 447(D) mm

Weight 23 kgs(G.W.), 20 kgs(N.W.)

Environment Operating Temperature: 0°C to 35°C

Consideration Humidity 20% to 80%

Storage Temperature: 20°C to 60°C

Humidity 10% to 90%

English8788

¨¨¨

English

Recommended Use of the Monitor

When setting up and using the monitor, pay special attention to the following

for optimum performance:

 Do not use your monitor against a bright background or where sunlight or

other light sources will shine directly on the screen.

 The monitor should be placed just below eye level (10°~15°) for optimum

viewing.

 Set the monitor's brightness to match ambient room light.

 For optimum focus, the contrast control should not be set to the maximum

level unless the input signal level is extremely low. Also, the brightness

control should be set to a point where the overall background area just

begins to disappear.

 Allow adequate ventilation around the monitor so that the heat from the

monitor can be properly dissipated.

 Neither the monitor itself, nor any other heavy objects, should rest on the

power cord. Damage to the power cord can cause fire or an electric shock.

 Keep the monitor away from high-capacity transformers, electrical motors,

or other strong magnetic fields.

 Your monitor should not be used in damp, dusty, or dirty areas.

 Handle your monitor with care when transporting it.

INTRODUCTION

CAUTION

 Do not scrape or knock the surface of the CRT with a pen, a

screwdriver and so on.

 Clean the CRT surface with a lint-free, nonabrasive, soft cloth, do

not use a solution or glass cleaner containing corpuscles like

abrasives, alcohols and alkalines.

¨¨¨

English

CONTROLS AND ADJUSTMENTS

Controls and Adjustments

Once you have installed the monitor with your system, please read the

instructions of this section which give you some guidelines on how to use the

monitor more efficiently. It leads you through the various function of the user

controls and explains how to adjust the monitor to your personal preference.

Front User Controls

1. Power Switch

To turn the monitor on or off.

2. Power LED Indicator

As long as the monitor is powered, this indicator is lit. In normal operation, it

lights green. While in power saving mode, the indicator will turn to amber.

3. Adjust Keys

To adjust the parameter of the selected function.

To adjust the contrast level of the screen.

4. Menu Key

To display and select the "General", "Picture", "Geometry", "Color",

"Advance", "Property", "Signal" functions.

Power Saving Note:

This monitor is equipped with a automatic power-saving circuitry design that

will work with any computer which meets the VESA DPMS standard. It also

meets the ENERGY STAR low power state definition.

English8988

¨¨¨

English

D. Color

C. Geometry

B. Picture

A.General

CONTROLS AND ADJUSTMENTS

a. Press "4"to select Brightness or Contrast.

b. Press "+" or "" to preferred picture.

a. Press "4"to select Vertical and Horizontal position,

Vertical and Horizontal size.

b. Press "+" or "" to preferred picture.

a. Press "4"to select Side-pin, Balance, Keystone,

Parallel and Rotate.

b. Press "+" or "" to preferred picture.

a. Press "4"to select various white color temperature

standards.

b. In User item presss "+" to confirm action color

adjustment.

c. Press "4" to select Red, Green and Blue.

d. Press "+" or "" increase or decrease density.

(1) Press "3" or "4" to open the On-Screen menu function. Seven adjustment

functions will appear on the On-Screen menu.

Press "3" key to scroll down through the selections.

¨¨¨

English

CONTROLS AND ADJUSTMENTS

F. Property

F-1. Status

F-2. Recall

E. Advance

a. Press "4"to select Moire or Degauss.

b. Press "+" to proceed.

c. Press "+" or "" to preferred picture.

Press "4"to select Status, Recall or Language sub-

manual.

The status show the current input signal information

such as Resolution, Horizontal Frequency and Vertical

Frequency.

Confirm the Recall action by pressing the "+" or cancel

the action by pressing the "".

Caution:

1. If moire reduction is overdone, picture quality,

i.e. focus and vertical line stability will both be

effected.

2. Proper adjustment is recommended for not

effecting picture perfermance.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Monitor Handbücher

Sony

Sony LMD-151MD Bedienungsanleitung

Sony

Sony CPD-100GST Bedienungsanleitung

Sony

Sony LPU-1601 Bedienungsanleitung

Sony

Sony CPD-9000 Operating Instructions (primary... Bedienungsanleitung

Sony

Sony MCM-2250NB Bedienungsanleitung

Sony

Sony SSM-175 Bedienungsanleitung

Sony

Sony SDM-S76D Bedienungsanleitung

Sony

Sony Multiscan SDM-N50R Bedienungsanleitung

Sony

Sony LMD-A240 Bedienungsanleitung

Sony

Sony Trinitron HMD-A100 Bedienungsanleitung

Sony

Sony XVM-F65 Bedienungsanleitung

Sony

Sony SDM-P232W - PREMIERPRO - 23" LCD Monitor Bedienungsanleitung

Sony

Sony SDM-S75NB Bedienungsanleitung

Sony

Sony LMD-1950MD Bedienungsanleitung

Sony

Sony GDM-17SE1/P Bedienungsanleitung

Sony

Sony lmd-b170 Bedienungsanleitung

Sony

Sony Trinitron PVM-14M2U Bedienungsanleitung

Sony

Sony PVM-2541 PVM-1741 PVM-740 LMD-2451W LMD-1751W LMD-4251TD LMD-2451TD LMD-2341W LMD-2041W LMD-1541W LMD-940W LMD-1530W LMD-2110W... Bedienungsanleitung

Sony

Sony SDM-X202 Bedienungsanleitung

Sony

Sony FWD-42PX2 Bedienungsanleitung

Sony

Sony SDM-S75DS Bedienungsanleitung

Sony

Sony PLM-A55 - Glasstron - 0.7" TFT Active Matrix Head Mounted... Bedienungsanleitung

Sony

Sony SDM-S74 Bedienungsanleitung

Sony

Sony Trinitoron CPD-G220 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung