Sony CLIE PEG-T415 Bedienungsanleitung
© 2001 Sony Corporation
CLIÉ Remote
Commander
Version 1.0
Operating Instructions
A-BOM-100-12(1)
2
On the supplied software
• Copyright laws prohibit reproducing the
software or the software manual in whole
or in part, or renting the software without
the permission of the copyright holder.
• In no event will SONY be liable for any
financial damage or loss of profits,
including claims made by third parties,
arising out of the use of the software
supplied with this player.
• In the event a problem occurs with this
software as a result of defective
manufacturing, SONY will replace it at
SONY’s option or issue a refund. However,
SONY bears no other responsibility.
• The software provided with this player
cannot be used with equipment other than
that which it is designated for use with.
• Please note that, due to continued efforts to
improve quality, the software specifications
may be changed without notice.
Program © 2001 Sony Corporation
Documentation © 2001 Sony Corporation
Sony and Jog Dial are trademarks of Sony
Corporation.
Graffiti, HotSync, and Palm OS are registered
trademarks, and the HotSync logo and Palm are
trademarks of Palm, Inc. or its subsidiaries.
Adobe and Adobe Acrobat Reader are
trademarks of Adobe Systems Incorporated.
This product includes fonts owned by
TypeBank Co., Ltd. under license.
All other trademarks are trademarks of their
respective owners.
CAUTION
Please contact your nearest Sony dealer
regarding the problem you are experiencing
with your Sony product.
3
Table of contents
What you can do with the CLIÉ
Remote Commander ............................ 4
Installing .............................................. 5
Preparing the CLIÉ Remote
Commander for your use ..................... 6
Assigning devices to the CLIÉ Remote
Commander ........................................... 6
Assigning operations to the application
buttons and Jog Dial navigator .............. 9
Using the CLIÉ handheld as a remote
commander ........................................ 11
Remote-controlling a device ................ 11
Viewing the device name assigned to
each quick-start button ........................ 12
CLIÉ Remote Commander
menu items ........................................ 13
Appendix ............................................ 14
Manufacturing companies supported
by the CLIÉ Remote Commander
application ........................................... 14
4
Chapter 4
What you can do with the CLIÉ Remote
Commander
The CLIÉ Remote Commander is an application you can install on your
CLIÉ handheld to enable the CLIÉ handheld to function as a remote
commander.
A single remote control for multiple devices
You can control a variety of remote-controlled devices (e.g. TV, VCR, DVD
player) with a single CLIÉ handheld, switching among them with a tap on
the quick-start buttons.
Customizable to suit your needs
If the four quick-start buttons are not enough to suit your needs, you can
always set more devices and select them from the Select menu.
You don’t even need to look at the screen...
You can assign operations to the Jog Dial™navigator or to the application
buttons on the front panel. For example, if you assign “increase volume” of a
certain device to the upward rotation of the Jog Dial navigator, you can
always change the volume of that device in that way without switching the
control screen.
5
Chapter 4
Installing
You can install the CLIÉ Remote Commander application via your
computer’s hard disk. Before installation, be sure to have the Palm Desktop
for CLIÉ software installed on your computer, and have the CLIÉ handheld
seated correctly in the cradle.
1Double-click the Palm Desktop for CLIÉ icon on the Windows
desktop.
The Palm Desktop for CLIÉ software starts.
2Click Install.
The Install Tool dialog box appears.
3Select a user name from the user list.
4Click Add.
Make sure that the Add-on folder is selected.
If the Add-on folder is not selected, select it manually.
At the default setup, the Add-on folder is stored in the Sony Handheld
folder of the Program Files folder.
5Double-click the RMC folder.
6Double-click the following folder.
•For PEG-T615C: Color folder
•For PEG-T415: Mono folder
7Double-click the following file.
•For PEG-T615C: CLIÉ_RMC.prc
•For PEG-T415: CLIÉ_RMC_m.prc
The selected file is added to the File Name list.
8
Repeat steps 4 to 6, and double-click the necessary define files
with the name “-def.prc” (e.g. TVdef.prc) for PEG-T615C, or
“-def_m.prc” (e.g. TVdef_m.prc) for PEG-T415.
The files are added to the File Name list.
9Click Done.
10
Press the HotSync button on the cradle.
Files specified in steps 7 and 8 are installed on your CLIÉ handheld
during the HotSync operation.
Note
The CLIÉ Remote Commander application does not start unless the
“-def.prc” applications are installed on your CLIÉ handheld.
6
Chapter 4
Preparing the CLIÉ Remote Commander for
your use
Assigning devices to the CLIÉ Remote Commander
Note
To check whether the manufacturer of your remote-controlled device is supported by
the CLIÉ Remote Commander application, refer to the “Appendix” on page 14.
1On the Application Launcher screen, rotate the Jog Dial™
navigator to select CLIÉ RMC and press the Jog Dial navigator.
Or, tap the CLIÉ RMC icon on the Application Launcher
screen.
The CLIÉ Remote Commander application starts and a list of the pre-
assigned device is displayed.
2Tap New.
The New Entry screen is displayed.
Continued on next page
7
Chapter 4
3Tap the arrow Vnext to the following items and select the
appropriate settings for your device(s).
•Category: Select the device you want to remote-control. Select from
TV, VCR, DVD, AV-AMP (amplifier).
•Maker: Select the manufacturing company of the remote-controlled
device from the drop-down list.
•Mode: Select the remote control mode from the drop-down list
(different models may require a different mode in order to operate).
•Button: Select which quick-start button you wish to assign the device
to. Choose the letter from the drop-down list, or select none.
4Point the IR port of the CLIÉ handheld toward the device you
want to remote-control and tap Test (power on/off).
If the device does not respond to the CLIÉ Remote Commander, select a
different mode type in step 3.
5In the Name box, enter a name for this remote control setting
(e.g. VCR in the den).
6Tap OK.
The remote control setting is assigned to the selected quick-start button,
and the control screen for the assigned device appears.
7To assign more devices to the other quick-start buttons, tap
Select on the control screen and repeat steps 2 to 5.
Note
Even if the manufacturer of the device is listed on the supported manufacturer list on
page 14, some devices cannot be remote-controlled depending on its model or the year
of its production.
Preparing the CLIÉ Remote Commander for your use
Example of the VCR remotes
8
Chapter 4
Changing the remote control setting
1Tap Menu on the control screen of the device of which
you want to change the remote control settings.
2Tap Detail from the Options menu.
The Detail screen appears.
3Make changes as necessary and tap OK.
The CLIÉ RMC dialog box appears.
4Tap OK.
The new remote control setting is set, and the control screen for the
assigned device appears.
Deleting a remote control setting
Tap Delete in step 2 of “Changing the remote control setting” and tap OK.
Preparing the CLIÉ Remote Commander for your use
9
Chapter 4
Assigning operations to the application buttons and Jog
Dial navigator
You can assign operations to the Jog Dial™navigator or to the application
buttons on the front panel. This is convenient for those operations you
perform most (e.g. adjusting the TV volume), since you do not even have to
take out the stylus to operate.
1On the Application Launcher screen, rotate the Jog Dial™
navigator to select CLIÉ RMC and then press the Jog Dial
navigator. Or, tap the CLIÉ RMC icon on the Application
Launcher screen.
CLIÉ Remote Commander starts and the control screen of the last used
device is displayed.
2Tap Menu .
3Tap Key Assignment from the Options menu.
The Key Assignment screen appears.
4If the check box for Use Key Assignment at the bottom right
corner is not selected, tap to select it.
If the check box is unmarked, application buttons and Jog Dial navigator
cannot be used in the CLIÉ Remote Commander application even if
operations are assigned to them.
Continued on next page
Preparing the CLIÉ Remote Commander for your use
10
Chapter 4
5Tap the box next to each assignable button (e.g. JOG Up).
The Key Assignment dialog box for each button appears.
6Tap the arrow Vnext to Entry, and select the name of the
remote control setting you wish to assign to the key.
7Tap the arrow Vnext to Function, and select the operation
you want to assign to that button.
8Tap OK.
9Repeat steps 3 to 8 until you have finished setting all the
functions that you want.
Preparing the CLIÉ Remote Commander for your use
Andere Handbücher für CLIE PEG-T415
5
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Sony PDA Handbücher
Sony
Sony PEG-SJ30 - Clie Color Handheld Benutzerhandbuch
Sony
Sony PEG-N710C Add-on Application Bedienungsanleitung
Sony
Sony COM-2 Supplement 1 Bedienungsanleitung
Sony
Sony PEG-S320 Add-on Application Bedienungsanleitung
Sony
Sony PEG-N710C Audio Player v2.0 Bedienungsanleitung
Sony
Sony CLIE PEG-T415 Bedienungsanleitung
Sony
Sony PEG-SJ30 - Clie Color Handheld Bedienungsanleitung
Sony
Sony CLIE PEG-N710C Bedienungsanleitung
Sony
Sony PEG-UX50 - Clie Handheld Bedienungsanleitung
Sony
Sony PEG-TJ25 - Personal Entertainment Organizer Benutzerhandbuch
Sony
Sony CLIE PEG-N610C Bedienungsanleitung
Sony
Sony CLIE PEG-TG50 Betriebsanleitung
Sony
Sony CLIE PEG-N610C Bedienungsanleitung
Sony
Sony COM-2 Supplement 1 Montage- und Bedienungsanleitung
Sony
Sony PCG-C1MV Bedienungsanleitung
Sony
Sony Clie PEG-NX70V Bedienungsanleitung
Sony
Sony CLIE PEG-S300/E Einrichtungshandbuch
Sony
Sony Clie PEG-NX70V Bedienungsanleitung
Sony
Sony PEG-UX50 - Clie Handheld Bedienungsanleitung
Sony
Sony PEG-TG50 Intellisync Lite Bedienungsanleitung
