Sony UP-CR10L Montageanleitung

Printing

* This may not be necessary in some cases.

Make sure not to forget your prints or memory card.

2-666-587-11

(1)C2005 Sony Corporation

Caution

Before using a memory card, be sure to create a backup copy of

its contents. Sony assumes no liability for lost or damaged data.

Print it!

Services

After editing, go to 7

Touch to display the edit menu.

Edit it!

Edit it! For details on how to edit, see Editing Images

Editing Images

Orca_QuickReference 2-666-587-11(1)

Lets you select and print a desired image.

Index Print

Prints an index of all the images on a memory

card at reduced size.

Split Image

Prints multiple photos on a single sheet.

Also handles ID photo size prints.

Border Print

Lets you select and add a border to your photo

before printing.

Basic Operation Guide

Full Mode

Select your language.*

Touch the screen.

14Select “Print.” 5

When you finish setting and

editing the image, touch .

78After verifying the number of

prints and the price, touch .9Ask the store clerk to enter

the password.*

Touch or to set the

number of prints.

Insert your memory card into the

slot on the front of the printer.

Touch the image you want to print.

Displays an enlarged view

of the image.

z For an explanation of this

screen, touch .

Adds a date stamp to all

images.

Do not remove your memory card

until a message appears asking

you to do so.

Printing begins!

Supported Data Formats

JPEG (Exif 2.2.1 Baseline)

TIFF (RGB uncompressed)

BMP (24-bit Windows)

Image size: 6,400 x 4,800 pixels max.

Supported Memory Cards

“Memory Stick” Standard /

“Memory Stick PRO”/

“Memory Stick Duo”

compatible

Picture Card SD Card/

MultiMediaCard

CompactFlash card

Microdrive

SmartMedia card

You can edit images taken with a camera for even lovelier

prints. Touch the button of any menu you wish.

Editing Images

If cropping or rotation is performed after red eye reduction, the

corrections for red eye are canceled.

Make sure to perform red eye reduction after cropping or rotation.

Orca_QuickReference 2-666-587-11(1)

The ability to crop images down to

an essential portion and to rotate

them gives you the freedom to

decide an image's composition.

Crop & Rotate

Cropping an Image

Use or to zoom in or out. Then, move the cropping area with

Rotating an Image

Each time you touch , the image rotates 90 degrees clockwise. Touch

until the image is oriented as you wish.

When ﬁnished editing, touch .

You can reduce the “red eye” effect resulting from ﬂash

photography.

Red Eye Reduction

Use and to position the frame

displayed in the preview screen around the red eye.

2Touch .Perform red eye reduction on one eye at a time.

To undo a correction,

touch .

3Verify the results of the correction on the preview screen.

When ﬁnished making corrections, touch .

You can process your prints in sepia or black and white to

give them the look of old photographs.

Changes to sepia image.

Sepia / Black&White

After selecting an option, touch .

Changes to black and white image.

You can change an image's color settings, adjusting the

brightness, tint, saturation, and sharpness as you wish.

Select the item you want to adjust, and touch

or to change the color value.

To ensure the desired color adjustment, verify

results in the preview screen while making

adjustments.

When ﬁnished adjusting, touch .

Color Adjustment

Closes the edit menu and returns to the

original screen.

Undoes your edits and resets to the

original image.

Editing Images

Making an Index Print

Printing a Split Image

Making a Border Print

* This may not be necessary in some cases.

Make sure not to forget your prints or memory card.

* This may not be necessary in some cases.

Make sure not to forget your prints or memory card.

* This may not be necessary in some cases.

Make sure not to forget your prints or memory card.

To reselect an image,

touch .

Orca_QuickReference 2-666-587-11(1)

Edit it!

Select your language.*

Insert your memory card into the slot

on the front of the printer.

4 Select “Split Image.”

After verifying the number

of prints and the price,

touch .

9Ask the store clerk to

enter the password.*

Select a layout for

the split image.

Select your language.*

Touch the screen.

14Select “Index Print.” After verifying the number

of prints and the price,

touch .

5Ask the store clerk to

enter the password.*

Select your language.*

Insert your memory card into the

slot on the front of the printer.

4Select “Border Print.”

Select a border and

touch .

Touch the image

you want to print.

7Touch or to set the

number of prints.

After verifying the number of

prints and the price, touch .

When you finish setting and

editing the image, touch .

Insert your memory card

into the slot on the front

of the printer.

Touch the screen.

Set the number of prints

and touch .

Touch the screen.

Ask the store clerk to enter

the password.*

Printing begins!

When the layout allows you to

assign multiple images, repeat

6and 7.

Touch the frame you

want to assign the

image to.

Do not remove your memory card until a

message appears asking you to do so.

Touch to display the

edit menu.

Select the image

and touch .

Touch to display the

edit menu.

Do not remove your memory card until a

message appears asking you to do so.

Prints an index of all the

images on a memory card at

reduced size.

For details on how to edit,

see

Do not remove your memory card until a

message appears asking you to do so.

For details on

how to edit, see

Editing Images

z For an explanation of this

screen, touch .

z For an explanation of this screen,

touch .

For Store Clerks

Maintenance Guide

123

689

Orca_QuickReference 2-666-587-11(1)

Replacing the Paper Roll

Open the side door. Remove the ribbon

cartridge.

Insert the new ribbon

cartridge.

Close the side door.

Open the front door. Press the paper holder

release button, and

remove the paper holder.

Remove the paper roll from

the paper holder.

Insert the paper core into

the new paper roll. 7

Pull the paper core out of

the old paper roll.

Close the paper holder. Insert the paper holder into

the printer.

Insert the paper roll into the

paper holder with the arrow

on the label pointing inward,

and then remove the label.

Close the front door.

Replacing the Ribbon Cartridge and Paper Roll

Clear out any paper scraps that have

built up in the paper holder.

For Store Clerks

Make sure to fully remove all labels from

the paper roll.

Replacing the Ribbon Cartridge

zImmediately after printing, the thermal head inside

the unit will be hot. When loading a cartridge,

do not insert your hand into the ribbon cartridge

access opening, to prevent the risk of burns.

zAlways use a designated print pack.

zBe sure to replace both the ribbon cartridge and

the paper roll as a set.

zDo not touch the printing surface of the

paper roll or the ink on the ribbon cartridge.

Fingerprints and other pollutants can lead to

reduced print quality.

Precautions

Open the paper holder

completely by pressing

the button at the top.

Orca_QuickReference 2-666-587-11(1)

Troubleshooting

A mounted memory card does not contain any data.

tInsert a memory card that contains image data.

Data has been recorded on a memory card in a format that the unit

does not recognize.

t Be sure to store image data in a format that the unit can recognize.

The memory card may not be properly inserted.

tMake sure that the memory card is fully inserted.

The memory card may not be inserted in the correct direction.

tSet the memory card in the direction shown on the operation screen.

Image data cannot be read.

Symptom Cause/ Remedy

Display not on or difﬁcult to see. Depending on the display angle, the display may not be visible or

may be difﬁcult to see.

tThe display angle can be adjusted. Adjust the angle of the display to

improve the display appearance.

There is a white margin on the printed image.

The print position may not be correct.

tAdjust the print position on the administration screen.

Paper roll was loaded, but “no paper”

message appears.

Paper roll may not have been loaded correctly.

tEnsure that paper roll is loaded correctly.

Ribbon cartridge was loaded, but “no

ribbon cartridge” message appears.

Ribbon cartridge may not have been loaded correctly.

tEnsure that ribbon cartridge is loaded correctly.

Out of paper message appears, but

there is still paper in the unit.

This is not a defect. Some spare paper will be left over.

tRemove the leftover paper and load a new ribbon cartridge and paper

roll.

Power does not switch on.

The power cord may not be connected.

tMake sure that the power cord is connected.

The on/standby button may not have been pressed correctly.

tMake sure that the on/standby button has been fully depressed.

The unit does not switch to standby.

The unit may still be doing processing.

tWait a few moments for the unit to stop processing.

An abnormal condition may have caused the unit to stop

responding.

tDisconnect the power cord from the power outlet.Then reconnect

the power cord, and press the on/standby button.

Cannot load paper roll.

Are you trying to load 2UPC-C13, C15 while adaptors are

mounted in the paper holder?

tRemove the adaptors and then load the paper roll.

Andere Handbücher für UP-CR10L

Inhaltsverzeichnis

Andere Sony Drucker Handbücher

Sony

Sony PictureStation DPP-FP30 Installationsanleitung

Sony

Sony UP-D75 Bedienungsanleitung

Sony

Sony DPP-EX50 Bedienungsanleitung

Sony

Sony UP-970AD Bedienungsanleitung

Sony

Sony FilmStation UP-DF750 Bedienungsanleitung

Sony

Sony UP-D55 Bedienungsanleitung

Sony

Sony UP-D6500 Bedienungsanleitung

Sony

Sony DPP-SV88 Bedienungsanleitung

Sony

Sony UPX-C200 Bedienungsanleitung

Sony

Sony UP-DR200 Bedienungsanleitung

Sony

Sony UP-20 Bedienungsanleitung

Sony

Sony UP-CR10L Bedienungsanleitung

Sony

Sony DPP FP70 - Picture Station Photo Printer Bedienungsanleitung

Sony

Sony UP-DR100 Bedienungsanleitung

Sony

Sony DPP-FPHD1 Instruction Manual (Photo Printer) Bedienungsanleitung

Sony

Sony UP-970AD Bedienungsanleitung

Sony

Sony LPR-1000MD Bedienungsanleitung

Sony

Sony DPP-MS300 Marketing Bedienungsanleitung

Sony

Sony SnapLab UP-CR15L Gebrauchsanweisung

Sony

Sony UPX-DP10 Bedienungsanleitung

Sony

Sony CVP-M1 Bedienungsanleitung

Sony

Sony DPP-FP50 Fall 2005 Bedienungsanleitung

Sony

Sony UP-895 Bedienungsanleitung

Sony

Sony UP-21MD Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung