Sony UP-DR150 Bedienungsanleitung

2-318-816-35(1)

Digital Photo Printer

UP-DR150

Operating Instructions

Owner's Record

The model and serial numbers are located at the rear.

Record these number in the space provided below.

Refer to these numbers whenever you call upon your

Sony dealer regarding this product.

Model No. ____________________

Serial No. ____________________

To reduce the risk of fire or electric shock, do

not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel

only.

THIS APPARATUS MUST BE EARTHED.

To disconnect the main power, unplug the AC

IN connector.

For the customers in the U.S.A.

This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

All interface cables used to connect peripherals must be

shielded in order to comply with the limits for a digital

device pursuant to Subpart B of Part 15 of FCC Rules.

Warning on power connection

Use a proper power cord for your local power supply.

1. Use the approved Power Cord (3-core mains lead) /

Appliance Connector / Plug with earthing-contacts

that conforms to the safety regulations of each

country if applicable.

2. Use the Power Cord (3-core mains lead) / Appliance

Connector /Plug conforming to the proper ratings

(Voltage, Ampere).

If you have questions on the use of the above Power

Cord/Appliance Connector/Plug, please consult a

qualified service personnel.

WARNING

Table of Contents

Introduction

Features .................................................................. 4

Basic Application Example ................................ 4

Location and Function of Parts and Controls .... 4

Preparation

Supplied Accessories ............................................. 6

Connections ............................................................ 6

Installing the Printer Driver ................................ 6

USB Port Connection ......................................... 7

Operation

Loading the Paper Roll and Ink Ribbon ............. 8

Attaching the Paper Holders to the Paper Roll ... 8

Loading the Paper Roll and Ink Ribbon ........... 11

Attaching the Paper Tray .................................. 15

If the Ink Ribbon Breaks during Use ............... 16

Removing the Ink Ribbon and Paper ............... 17

Printing from the Computer ............................... 19

Menu Operations ................................................. 20

Preparation for Menu Operation ...................... 20

Adjusting the Gray Balance ............................. 21

Displaying the Quantity of Pages Printed ........ 22

Displaying the Firmware Version of the Printer ...

Adjusting the Position of the Printout Image ... 23

Miscellaneous

Precautions ........................................................... 25

Safety ................................................................ 25

Installation ........................................................ 25

On Transporting the Printer .............................. 25

Cleaning ........................................................... 25

Ink Ribbon and Paper ......................................... 29

Specifications ........................................................ 29

List of Messages ................................................... 30

Troubleshooting ................................................... 31

Index ..................................................................... 33

Introduction

Features / Location and Function of Parts and Controls

Introduction

Features

The UP-DR150 Digital Photo Printer is a dye

sublimation thermal transfer printer providing high

quality, high resolution (334 dpi), and high speed

printing of computer image data on four sizes of paper

in full color (256 gradations process and 16.7 million

colors).

Basic Application Example

Location and Function

of Parts and Controls

For more details, see the reference pages numbers

enclosed in parentheses.

AALARM indicator (30)

Lights in red when the system is initialized, or when

an error occurs.

Computer: provides

image data for printing

and printer control

signals

UP-DR150 Digital Photo Printer

Front panel

Rear panel

Introduction

Location and Function of Parts and Controls 5

BLCD (liquid crystal display) (19, 22, 30)

Displays the number of pages printed, or the

amount of ink ribbon remaining. Messages are

displayed when an error or warning condition

occurs.

CLock lever for the front door

Used to open the front door when loading or

replacing the ink ribbon and paper, or cleaning.

When the front door opens

APaper cartridge

The paper roll is placed here.

BRibbon base

The ink ribbon is attached here.

CLock lever for the ribbon base

Pull the lever so that you can pull up the ribbon

base.

DFilter

DVentilation holes

A filter for the cooling fan to prevent the thermal

head from overheating is located.

EPaper Output Slot

Printed pages are output from the printer here.

FPaper tray (15)

The printouts are ejected onto this tray. Adjust the

length of the paper tray according to the printing

pack to be used.

A margin of about 20mm drops into this tray.

GSupport

Pull out the support when using the 2UPC-R155/

R155H and 2UPC-R156/R156H Printing Pack.

HFront panel

Buttons to be used for menu operation are located

under this front panel.

Key panel section

AEXEC Button (21)

Press this button to print the gray scale adjustment

pattern.

BMENU Button (22)

Press this button to carry out menu operations.

Pressing the MENU button changes the printer to

the off-line mode.

CCursor Buttons (22)

Press these buttons to select the item to be

displayed on the LCD.

DCAL (calibration) button (21)

Press this button to adjust the gray balance.

EPRINT STOP button (20)

Pressing the PRINT STOP button for more than one

second during printing results in cancelling the

number of printings set and clearing the images

stored in the memory. The printer stops printing

when the page currently printing is completed and

ejected.

I-AC IN (Power Source) Connector (6)

Connect the supplied power cord here.

J!POWER switch (19)

Press this switch to turn the printer on or off.

KUSB connector (7)

Connects to a computer equipped with the USB

interface (which conforms to USB 2.0), using a

USB cable (not supplied).

Preparation

Supplied Accessories / Connections

Preparation

Supplied Accessories

Make certain you have received the following

accessories:

Notes

• When taking the printer out of the carton box, be

careful not to hurt your back.

• The packaging materials are needed when

transporting the printer, so we suggest you keep them.

Connections

After connecting a USB connecting cable (not supplied)

to the printer and the computer, connect the power cord.

For details about the printer connection, refer to the

manuals for the computer or other peripheral devices.

Notes

• Before connecting the printer to the computer, be sure

to install the printer driver.

• Follow the connection procedures described in the

computer manual.

• Make sure that the interface cable is connected

securely at both ends.

• The printer drive software provided with the printer is

not suitable for using the printer connected to a

network.

• Operation of the printer is not guaranteed for

connection to a USB hub.

• Before connecting the unit using a USB cable (not

supplied), attach a supplied ferrite core to the end of

the cable to be connected to the printer for noise

prevention. For detailed information on how to attach

the ferrite cores, see “Attaching a ferrite core to a USB

cable” on page 7.

Installing the Printer Driver

Install the printer driver provided with the printer. For

detailed instructions on how to install the printer driver,

refer to the Readme.txt file and the install manual

contained on the CD-ROM disc supplied.

Paper Tray a) (1)

AC power cord (1)

Paper holders b) (2)

CD-ROM (1)

Ferrite core (1)

Operating Instructions (1)

Software License Agreement (1)

Warranty Card (1)

Service and Customer Support

Information (1)

a) Before attaching the paper tray, be sure to remove the

corrugated paper from the inside of the paper tray.

b) The paper holders are stored in the printer. Be sure to

remove the two paper holders from the inside of the

printer before turning the power on.

For details on how to remove them, see step 1 of

“Attaching the Paper Holders to the Paper Roll” on

page 8

Preparation

Connections 7

USB Port Connection

Attaching a ferrite core to a USB cable

Before connecting a USB cable (not supplied) to the

printer, you should attach a supplied ferrite core to its

cable for noise prevention. To conform to radiation

standards, attach the supplied ferrite core to the USB

cable of your device as described below.

Release two stoppers on the ferrite core to open it.

Slip the USB cable through the ferrite core and

position it at the base of the USB connector to the

printer.

Close the ferrite core until you hear a click.

Note

When the ferrite core cannot be secure because the USB

cable is thin, secure it using a tape.

Securing a USB cable

After you connect a USB cable to the printer, it is

recommended that you secure the USB cable as

illustrated, to prevent it from being accidentally

disonnected.

When a USB cable of about 5-mm in diameter is

used

Pass the USB cable under the upper cable stopper as

illustrated below.

When a USB cable of about 4-mm in diameter is

used

Pass the USB cable under the lower cable stopper as

illustrated below.

When a USB cable of less than 4-mm in

diameter is used

Pass the USB cable between the lower and upper cable

stoppers as illustrated below.

to (USB) connector

USB connecting cable

(not supplied)

UP-DR150

to -AC IN

connector

AC power

cord

(supplied)

to wall outlet

Computer

Operation

Loading the Paper Roll and Ink Ribbon

Operation

Loading the Paper Roll

and Ink Ribbon

This section describes how to load the paper roll and ink

ribbon in the preparation to start printing, after

connecting the printer as described on page 6,

Notes

• Each printing pack contains two sets of the ink ribbon

and paper roll combination. Use the ink ribbon and the

paper roll in the carton as a set. Do not mix with other

varieties of ribbon or paper roll. (See “Ink Ribbon and

Paper” on page 29.)

• One set of the ink ribbon and paper roll allows you to

print the following number of sheets.

• Do not replace the printing pack if it has only been

partially used. The number of printouts that can be

printed may not be guaranteed if you replace the ink

ribbon and paper before they have run out.

• Place the paper roll vertically. If you place the paper

roll horizontally, the paper may roll around and fall.

This may cause an injury.

• Hold the paper roll with both hands so that you do not

drop it, because it is heavy. Dropping may result in an

injury.

• Do not detach the black and white spools of the ink

ribbon until you start loading the ink ribbon.

• A built-in IC chip is located around one side of the

black spool. Be careful not to remove the IC seal,

hurt it, or give it a shock. If you do, you may not be

able to use the ink ribbon any more.

Attaching the Paper Holders to the

Paper Roll

A pink paper holder and a blue paper holder are supplied

with the printer. Attach them to the new paper roll, and

then load the paper roll.

When you use the printer for the first time, start the

operation from step 1 to remove paper holders which

were placed in the printer at the factory.

If you have already removed the paper holders, start the

operation from step 4.

pack

2UPC-

R153/

R153H

2UPC-

R154/

R154H

2UPC-

R155/

R155H

2UPC-

R156/

R156H

Printing

capacity

610 (sheets) 550 (sheets) 335 (sheets) 295

(sheets)

size

89×127 mm 102×152

127×178

152×204

3.5×5

inches

4×6 inches 5×7 inches 6×8

inches

Hold the paper roll with both hands.

White spool

Black spool

IC seal into which the IC

chip is built

Operation

Loading the Paper Roll and Ink Ribbon 9

Pull the lock lever for the front door toward you to

open the front door

Pull the lock lever for the ribbon base located on the

front of the ribbon base and pull up the ribbon base.

Pull the paper cartridge of the printer toward you.

Take out the packages in which the paper holders

are stored inside the printer.

Then, close the front door in the reverse operation.

Adjust the length of the blue paper holder.

There are two kinds of paper. One is paper with

127-mm (5-inch) width and the other is paper with

152-mm (6-inch) width.

The blue paper holder has been pre-adjusted for

paper with a 152-mm (6-inch) width.

Paper with 127-mm (5-inch) width: 2UPC-

R153/R153H and 2UPC-R155/R155H

Printing Pack

Shorten the length of the blue paper holder.

Operation

Loading the Paper Roll and Ink Ribbon

To shorten the length of the blue paper

holder for the left side of the roll

Paper with 152-mm (6-inch) width: 2UPC-

R154/R154H and 2UPC-R156/R156H

Printing Pack

Extend the length of the blue paper holder.

Extend the length of the blue paper holder

following the reverse of the operation used for

shortening its lengthl.

Insert the blue paper holder inside the paper roll as

illustrated.

Place the paper upside down and attach the pink

paper holder as illustrated.

Pinch the two

buttons inward.

And then, push

this round part

downward.

Turn this round part fully

counterclockwise.

Push this round part

upward.

Confirm that the arrow

on the shaft of the blue

paper holder is aligned

with the arrow for

R153/R155 on the

label

Confirm that the arrow

on the shaft of the blue

paper holder is aligned

with the arrow for

R154/R156 on the

label

To remove the blue tape from

the cut on the tape, tear and

pull the blue tape after

attaching the paper holders.

A part of the tape remains

inside the case of the paper

roll.

Insert this blue paper holder

into the side to which the

blue tape is attached.

Andere Handbücher für UP-DR150

Inhaltsverzeichnis

Andere Sony Drucker Handbücher

Sony

Sony UP-GR700 Bedienungsanleitung

Sony

Sony UP-DP10 Bedienungsanleitung

Sony

Sony UP-D890 Bedienungsanleitung

Sony

Sony UP-CX2 Bedienungsanleitung

Sony

Sony CVP-G700 Bedienungsanleitung

Sony

Sony UPA-50RH Bedienungsanleitung

Sony

Sony UP-960 Bedienungsanleitung

Sony

Sony UP-2300 Bedienungsanleitung

Sony

Sony UP-DR80MD Bedienungsanleitung

Sony

Sony UP-CX1 series Bedienungsanleitung

Sony

Sony UP-2300 Installations- und Betriebshandbuch

Sony

Sony UP-D55 Bedienungsanleitung

Sony

Sony UP-880 Bedienungsanleitung

Sony

Sony UP860 Bedienungsanleitung

Sony

Sony DPP-FPHD1 Instruction Manual (Photo Printer) Bedienungsanleitung

Sony

Sony UPX-C200 Bedienungsanleitung

Sony

Sony DPP-FP97 Bedienungsanleitung

Sony

Sony UP-D72XRS Bedienungsanleitung

Sony

Sony FilmStation UP-DF750 Bedienungsanleitung

Sony

Sony UP-D75 Bedienungsanleitung

Sony

Sony DPP-SV55 Bedienungsanleitung

Sony

Sony UP-D55 Bedienungsanleitung

Sony

Sony UPA-PC105 Bedienungsanleitung

Sony

Sony UP-DR250 Handbuch

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung