Sony KP-41PX1R Bedienungsanleitung

Operating Instructions

KP-41PX1R

Инструкции за експлоатация BG

Инструкция по эксплуатации

Projection TV

4-206-027-41(2)

Additional Safety Information

•After transporting the projection TV directly from a cold to a warm location, or if the room temperature has changed suddenly,

pictures may be blurred or show poor colour over portions of the picture. This is because moisture has condensed on the mirrors

or lenses inside the projection TV. Let the moisture evaporate before using the projection TV.

•To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed

down from the ceiling.

•Displaying a still picture for long periods of time, for instance, when operating a video game or personal computer and viewing a

programme in 16:9 mode, may damage the picture tube. To avoid this, keep the picture contrast level low.

•Avoid touching the screen, and take care not to scratch the surface with hard objects.

Do not open the cabinet and the rear

cover of the TV. Refer to qualiﬁed

service personnel only.

To prevent ﬁre or shock hazard,

do not expose the TV to rain or

moisture.

For your own safety, do not touch

any part of the TV, power lead or

aerial lead during lightning storms.

Do not cover the

ventilation openings of the TV For

ventilation, leave a space of at least

10cm all around the set.

Never place the TV in hot, humid or

excessively dusty places. Do not

install the TV where it may be

exposed to mechanical vibrations.

To prevent ﬁre, keep inﬂammable

objects or naked lights (eg candles)

away from the TV.

Clean the TV with a soft, lightly

dampened cloth. Do not use

benzine, thinner or any other

chemicals to clean the TV. Do not

scratch the TV screen. As a safety

precaution, unplug the TV before

cleaning it.

Pull out the power lead by the

plug. Do not pull on the power

lead itself.

Take care not to place heavy

objects on the power lead as this

could result in damage.

We recommend you wind any

excess lead around the holders

provided on the rear of the TV.

Place the TV on a secure stable

stand. Do not allow children to climb

on to it. Do not place the TV on its

side or face up.

Do not cover the ventilation

openings of the TV with items such

as curtains or newspapers etc.

Never push objects of any kind into

the set as this could result in a ﬁre or

electric shock. Never spill liquid of

any kind on the set. If any liquid or

solid object does fall through, do not

operate the TV. Have it checked

immediately by qualiﬁed personnel.

For environmental and safety

reasons, it is recommended that the

TV set is not left in standby mode

when not in use. Disconnect from

the mains.

This set is to operate on a 220-

240V AC supply only.Take care not

to connect too many appliances to

the same power socket as this

could result in ﬁre or electric shock.

Unplug the power lead before

moving the TV. Avoid uneven

surfaces, quick steps or excessive

force. If the set has been dropped

or damaged, have it checked

immediately by qualiﬁed service

personnel.

Safety Information

Contents

Safety Information..............................................................................2

Overview............................................................................................4

Getting Started................................................................................. 6

Step 1 Preparation.............................................................................6

Check the Supplied Accessories ............................................6

Insert the Batteries into the Remote Commander ..................6

Connect the Aerial and VCR ..................................................6

Step 2 Tuning in to TV Stations .........................................................7

Choose a Language ...............................................................7

Preset Channels Automatically...............................................8

Step 3 Adjusting Colour Registration (CONVERGENCE) .................9

Converge the Red, Green, and Blue Lines.............................9

Additional Presetting Functions .......................................................10

Presetting Channels Manually .............................................10

Manual Fine-Tuning..............................................................11

Sorting Programme Positions ...............................................11

Skipping Programme Positions.............................................12

Captioning a Station Name...................................................12

Using Parental Lock..............................................................13

Tuning in a Channel Temporarily..........................................13

Operating Instructions ..................................................................14

Watching the TV ..............................................................................14

Switching the TV on and off..................................................14

Selecting TV Programmes....................................................14

Adjusting the Volume............................................................14

Operating the TV Using the Buttons on the TV ....................14

Watching Teletext or Video Input..........................................15

More Convenient Functions..................................................15

Adjusting and Setting the TV Using the Menu .................................16

Adjusting the Picture and Sound ..........................................16

Using the Sleep Timer ..........................................................17

Teletext ............................................................................................18

Direct Access Functions .......................................................18

Connecting and Operating Optional Equipment ..............................20

Connecting Optional Equipment ...........................................20

Selecting lnput Signal ...........................................................21

Using AV Label Preset..........................................................22

Checking and Selecting the Input and

Output Sources Using the Menu........................................22

Remote Control of Other Sony Equipment ...........................23

For Your Information........................................................................24

Optimum Viewing Area .........................................................24

Troubleshooting ....................................................................25

Specifications........................................................................25

Overview

This section briefly describes the buttons and controls on the TV

set and on the Remote Commander. For more information, refer to

the pages given next to each description.

TV set-front

Push up the flap on the front of the

TV to reveral the front control panel.

Symbol Name Refer to page

UMain power switch 14

uStandby indicator 14

PROGR +/- Programme buttons 14

Á+/- Volume buttons 14

…Input select buttons 15

2Headphones jack 20

q3, …3, ≤3 Input jacks (S video/video/audio) 21

Auto Preset button 8

Auto Convergence button 9

TV/Teletext operation

Symbol Name Refer to page

¤Mute on/off button 15

TV uTV Standby button 14

;TV power on/TV mode selector 14

button

fTeletext button 15

…/yInput mode selector/ 15

Teletext: Freezing the subpage 18

…/ Teletext: Reveal button 18

1,2,3,4,5,6, Number buttons 14

7,8,9 and 0

-/-- Double-digit entering button 14

C Direct channel entering button 13

Á+/- Volume control button 14

PROGR +/- Programme selectors 17

R/STeletext: Page up/page down buttons 18

ÍPicture mode button 17

≥Sound mode button 17

On-screen display button 15

#Time display button 15

Button to change Screen Format 15

Teletext: Favourite pages button 19

Menu operation

Symbol Name Refer to page

MENU Menu on/off button See below.

Joystick for Menu selection See below.

Press to confirm selection

(OK function)

Video operation

Symbol Name Refer to page

VTR1/2/3, Video equipment selector 23

MDP

0()pVideo equipment operation 23

PrVIDEO ubuttons

CH +/-

No function on this set

Symbol: ,,, , ,, Ú/ , (for TV

operation)

YELLOW:

increase/forward

to next item

Joystick: Press at

its neutral position

to confirm selection

or store

RM-862

a/Å

´/´

;

MDP2 TV

VIDEO

3VTR 1

( u)

pPr

PROGR

≥

˚+

;REC

…/ Ú/;

Remote commander

TV/Teletext operation

Video operation

TV/Teletext operation

Menu operation

For the Menu System

Use the MENU button and the joystick as follows.

1 Press MENU button to switch menu on or off.

2 Use the joystick as follows:

GREEN: scroll up

RED:

decrease/back to last item

or to last menu

When menu is not

displayed:

Push to red to display the

last menu screen

BLUE: scroll down

The operable functions of the joystick are displayed on the

screen.

Getting Started

Step 1 Preparation

1Check the Supplied Accessories

When you’ve taken everything

out of the carton, check that you

have these items:

•RM-862 Remote Commander

•Two IEC designation R6 batteries

2Insert the Batteries into the Remote Commander

3Connect the Aerial and VCR

Note: Always remember

to dispose of used

batteries in an

environmentally friendly

way.

Remove the cover. Check the correct

polarities.

The Scart lead is optional.

If you use this optional connection it can improve picture and sound quality when using a VCR.

If you do not use a SCART lead, after automatically tuning the projection TV refer to the

“Presetting channels Manually”section of this instruction manual, to the tune in the set to the

ouput of you VCR. Also refer to your VCR instruction manual to find out how to find the output

channel of your VCR.

Step 2 Tuning in to TV Stations

1Check the Supplied Accessories

This function enables you to select the language of the menu

screens.

1Press U(main power switch) on the TV.

The TV will switch on. If the standby indicator on the TV is lit, press

;or a number button on the Remote Commander.

2Press MENU on the remote commander.

The LANGUAGE menu appears

3Push the joystick to blue or green to select the language you want.

Press the joystick to confirm your selection.

4Press MENU to restore the normal TV picture.

RM-862

a/Å

´/´

;

MDP2 TV

VIDEO

3VTR 1

( u)

pPr

PROGR

≥

˚+

;REC

…/ Ú/;

LANGUAGE

2Preset Channels Automatically

With this function, the TV automatically searches and stores up

to 100 channels onto programme positions. If you prefer

“Presetting Channels Manually”, please refer to page 10 in

Additional Presetting Functions.

1Press U(main power switch) on the TV.

The TV will switch on. If the standby indicator on the TV is lit,

press ;or a number button on the Remote Commander.

2Press and hold the on the TV until the automatic menu is

displayed and the search starts.

After all available channels are stored, the normal TV picture is

shown.

Presetting channels automatically by using the

Remote Commander

1Press MENU.

2Push the joystick to blue or green to select the symbol , then

push to yellow.

The PRESET menu appears.

3Push the joystick to blue or green to select “Auto Programme”.

4Push to yellow and hold until the AUTO PROGRAMME menu is

displayed and the search starts.

After all available channels have been preset, the normal TV

picture is shown.

RM-862

a/Å

´/´

;

MDP2 TV

VIDEO

3VTR 1

( u)

pPr

PROGR

≥

˚+

;REC

…/ Ú/;

Auto Programme

Manual Programme

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

6 D/K

SYSPROG

C26

CHAN

- - - - -

LABEL

AUTO PROGRAMME

Notes:

•You can sort the

programme positions

to have them appear

on screen in the order

you like. For details,

see “Sorting

Programme Positions”

on page 11.

•To stop automatic

channel presetting

Press Menu on the

Remote Commander.

Step 3 Adjusting Colour Registration

(CONVERGENCE)

Converge the Red, Green, and

Blue Lines

1Press button on the TV.

2The Auto Convergence function works for about 30 seconds.

When the auto convergence function does not

work correctly

Adjust the colour registration by selecting the “Convergence”of

the PRESET menu.

1Press MENU.

2Push the joystick to blue or green to select the symbol , then

push to yellow.

The PRESET menu appears.

3Push the joystick to blue or green to select “Convergence”, then

push to yellow.

The CONVERGENCE menu appears.

4Push the joystick to blue or green to select “the line”(vertical and

horizontal lines in red and blue) you want to adjust.

Press the joystick to confirm.

: red vertical line (left/right adjustment)

: red horizonta line (up/down adjustment)

: blue vertical line (left/right adjustment)

: blue horizontal line (up/down adjustment)

The line to adjust is selected.

5Push the joystick to blue or green to converge the selected line

with the green line in the centre.

Press the joystick to confirm.

6Repeat steps 4 and 5 to adjust the other lines, until all the lines

have overlapped to form a white cross.

7Press MENU to restore the normal TV picture.

Notes:

The Auto Convergence

function does not work:

•when no signal is input.

•when the input signal is

weak.

•when the screen is

exposed to spotlights or

direct sunlight.

•when you watch the

teletext broadcast.

•when you watch TV

programmes in 16:9

mode.

RM-862

a/Å

´/´

;

MDP2 TV

VIDEO

3VTR 1

( u)

pPr

PROGR

≥

˚+

;REC

…/ Ú/;

Auto Programme

Manual Programme

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

Additional Presetting Functions

Presetting Channels Manually

Using this function, you can preset channels one by one to

different programme positions. This is also convenient to allocate

programme numbers to video input sources.

1Press MENU.

2Push the joystick to blue or green to select the symbol on the

menu screen. Push to yellow to confirm the selection.

3Push to blue or green to select “Manual Programme”. Push to

yellow to confirm the selection.

4Push to blue or green to select the programme position (PROG)

to which you want to preset a channel. Push to yellow to confirm.

5Push to blue or green to select the TV broadcast system (SYS)

(B/G for western European countries, D/K for eastern European

countries) or a video input source (AV1, AV2, AV3, YC2, YC3,

RGB). Push to yellow to confirm.

º6Push to blue or green to select “C”(for terrestrial channels) or “S”

(for cable channels). Push to yellow to confirm.

There are two options to preset channels manually:

a) You know the channel number.

Please use method “Direct Input”.

b) You don’t know the channel number.

Please use method “Search”.

7 a) Direct Input

Select the first number digit of “CHAN”(channel), then the

second number digit of “CHAN”with the number buttons on the

Remote Commander (e.g. for channel 2, first press 0, then 2).

7 b) Search

Push the joystick to blue or green to search for the next available

channel.

8If you want to store the channel, go to step 9. If not, select a new

channel using the number button on the Remote Commander or

push the joystick to blue or green to resume the search.

9Press the joystick to confirm.

10 Repeat steps 4 to 9 to preset other channels.

11 Press MENU to restore the normal TV picture.

RM-862

a/Å

´/´

;

MDP2TV

VIDEO

3VTR 1

( u)

pPr

PROGR

≥

˚+

;REC

…/ Ú/;

Auto Programme

Manual Programme

AV Label Preset

Programme Sorting

Parental Lock

Language

Convergence

PRESET

D/K

SYSPROG

C29

C31

C32

C36

C37

C40

C41

C44

C49

C52

CHAN

- - - - -

LABEL

AFT

MANUAL PROGRAMME PRESET

MANUAL

PROGRAMME

PRESET

Inhaltsverzeichnis

Sprachen:

Andere Sony Projektionsfernsehen Handbücher

Sony

Sony GRAND WEGA KF 60DX100 Bedienungsanleitung

Sony

Sony KF-WS60 Bedienungsanleitung

Sony

Sony KP-FX532M90 Bedienungsanleitung

Sony

Sony KD-34XBR2 - 34" Hdtv Fd Trinitron Wega Installationsanleitung

Sony

Sony KV-30HS510 Bedienungsanleitung

Sony

Sony KP-43T75C Bedienungsanleitung

Sony

Sony Grand Wega KF-50SX100 Bedienungsanleitung

Sony

Sony KP-53S65 - 53" Projection Tv Bedienungsanleitung

Sony

Sony KP-FS57 Bedienungsanleitung

Sony

Sony QUALIA KDS-R50XBR1 Bedienungsanleitung

Sony

Sony KL-50SX100 Bedienungsanleitung

Sony

Sony XBR Grand WEGA KF-50XBR800 Bedienungsanleitung

Sony

Sony KP-53XBR45 - 53" Projection Tv Bedienungsanleitung

Sony

Sony KDF-E42A11E - 42" Rear Projection TV Bedienungsanleitung

Sony

Sony KP-FX43M90A Bedienungsanleitung

Sony

Sony KP-EF61HK2 Bedienungsanleitung

Sony

Sony KP-48V80 - 48" Color Rear Video Projector Bedienungsanleitung

Sony

Sony Bravia KDS-60R2000 Bedienungsanleitung

Sony

Sony KP 48V85 Bedienungsanleitung

Sony

Sony KDF-37H1000 - 37" Bravia 3lcd Microdisplay Projection... Gebrauchs- und Wartungshandbuch

Sony

Sony GrandWega KDF-55E2000 Bedienungsanleitung

Sony

Sony GrandWega KDF-E55A20 Bedienungsanleitung

Sony

Sony KP-44PS2U Bedienungsanleitung

Sony

Sony Bravia KDS-70R2000 Bedienungsanleitung

Beliebte Projektionsfernsehen Handbücher anderer Marken

Samsung

Samsung ST-43T6P Bedienungsanleitung

Toshiba

Toshiba ColorStream TP50G60 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-65734 Bedienungsanleitung

Optoma

Optoma EP652A Bedienungsanleitung

Samsung

Samsung SP43T8HPX/XEC Bedienungsanleitung

Philips

Philips 28PW6006 - annexe 1 Bedienungsanleitung

Philips

Philips 43PP8421 Bedienungsanleitung

Hitachi

Hitachi 51F510 Bedienungsanleitung

RCA

RCA P52950 Bedienungsanleitung

Magnavox

Magnavox 51MP392H - 51" Widescreen Hd Ready Tv Bedienungsanleitung

Hitachi

Hitachi 46F510 Bedienungsanleitung

Pioneer

Pioneer Elite PRO 510HD Bedienungsanleitung

Philips

Philips 43PP8421 Handbuch

JVC

JVC I'Art Pro AV-48P776 Bedienungsanleitung

Toshiba

Toshiba 42HM66 - 42" Rear Projection TV Bedienungsanleitung

Philips

Philips 50PL9200D Bedienungsanleitung

Hitachi

Hitachi 51S715 Bedienungsanleitung

Samsung

Samsung HC-P5256W Bedienungsanleitung