Sony KP-44PS2 Bedienungsanleitung

Instruction Manual

KP-44PS2

KP-51PS2

Mode d’emploi FR

Bedienungsanleitung

Manuale d’Istruzioni

Gebruiksaanwijzing NL

Οδηγίες Χρήσης GR

Kullanwm Kwlavuzu TR

100 Hz

Projection TV

4-082-171-11(1)

NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM

A moulded plug complying with BS1363 is fitted to this equipment for your safety and

convenience.

Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI

to BS 1362 (i.e. marked with 2or @must be used.

When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the

circuit should be protected by a 5 AMP FUSE at the distribution board.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse

cover after you change the fuse. Never use the plug without the fuse cover. If you should lose

the fuse cover, please contact your nearest Sony service station.

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and replace the fuse.

•IMPORTANT

If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and

an appropriate plug fitted in accordance with the following instructions:

The wires in this mains lead are coloured in accordance with the following code:

Blue Neutral

Brown Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the

letter N or coloured black. The wire which is coloured brown must be connected to the

terminal which is marked with the letter L or coloured red. Do not connect either wire to the

earth terminal in the plug which is marked by the letter E or by the safety earth symbol Yor

coloured green or green and yellow.

WARNING

• To prevent shock hazard, do not insert the plug cut off from the mains lead into a socket

outlet. This plug cannot be used and should be destroyed.

• To prevent fire or shock hazard, do not expose the unit to rain or moisture.

• Dangerously high voltages are present inside the set. Do not open the cabinet. Refer servicing

to qualified personnel only.

FUSE

Introduction

Thank you for choosing this Sony 100 Hz Projection TV model.

Before operating the set, please read this manual thoroughly and retain it for future reference.

• Symbols used in the manual:

• Informs you of possible hazards.

• Important information.

• Information on a feature.

• 1,2... Sequence of instructions.

• Shaded buttons on the remote control show the

buttons you have to press to follow the sequence

of instructions.

• Informs you of the result of the instructions.

Table of Contents

Notice for Customers in the United Kingdom............................................................................................................................................................. 2

Introduction ...................................................................................................................................................................................................................... 3

Safety Information............................................................................................................................................................................................................ 4

Overview

Checking the Accessories Supplied.................................................................................................................................................................. 5

Overview of TV Buttons .................................................................................................................................................................................... 5

Overview of Remote Control Buttons.............................................................................................................................................................. 6

Installation

Inserting Batteries into the Remote Control.................................................................................................................................................... 7

Connecting the Aerial and VCR ....................................................................................................................................................................... 7

First Time Operation

Switching on the set and Automatically Tuning............................................................................................................................................ 8

Adjusting Colour Registration (Convergence) ............................................................................................................................................... 9

Menu System

Changing the Screen Format ........................................................................................................................................................................... 10

Introducing the Menu System......................................................................................................................................................................... 10

Using the Menu System:

Adjusting the Picture ..................................................................................................................................................................................... 11

Adjusting the Sound ...................................................................................................................................................................................... 12

Using the Features menu............................................................................................................................................................................... 14

Manually Tuning the TV............................................................................................................................................................................... 15

Labelling a channel ........................................................................................................................................................................................ 16

Skipping programme positions.................................................................................................................................................................... 17

Using the “Further Programme Preset” function...................................................................................................................................... 18

Inputting your personal ID........................................................................................................................................................................... 19

Using the Demo Mode................................................................................................................................................................................... 20

Adjusting the H Centre picture for an RGB source................................................................................................................................... 21

Labelling and Selecting the screen format of Input Sources.................................................................................................................... 22

Using Multi PIP (Picture In Picture)............................................................................................................................................................ 23

Using PAP (Picture And Picture)................................................................................................................................................................. 23

Teletext...................................................................................................................................................................................................................... 24

NexTView................................................................................................................................................................................................................. 26

Optional Connections

Connecting Optional Equipment.................................................................................................................................................................... 28

Using Optional Equipment.............................................................................................................................................................................. 29

Smartlink ............................................................................................................................................................................................................ 30

Remote Control of other Sony Equipment.................................................................................................................................................... 30

Additional Information

Optimum Viewing Area .................................................................................................................................................................................. 31

Specifications ..................................................................................................................................................................................................... 32

Troubleshooting ................................................................................................................................................................................................ 33

4Safety Information

Additional Safety Information

•After transporting the projection TV directly from a cold to a warm location, or if the room temperature has changed suddenly,

pictures may be blurred or show poor colour over portions of the picture. This is because moisture has condensed on the mirrors

or lenses inside the projection TV. Let the moisture evaporate before using the projection TV.

•To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed

down from the ceiling.

•Displaying a still picture for long periods of time, for instance, when operating a video game or personal computer and viewing a

programme in 16:9 mode, may damage the picture tube. To avoid this, keep the picture contrast level low.

•Avoid touching the screen, and take care not to scratch the surface with hard objects.

Do not open the cabinet and the rear

cover of the TV. Refer to qualiﬁed

service personnel only.

To prevent ﬁre or shock hazard,

do not expose the TV to rain or

moisture.

For your own safety, do not touch

any part of the TV, power lead or

aerial lead during lightning storms.

Do not cover the

ventilation openings of the TV For

ventilation, leave a space of at least

10cm all around the set.

Never place the TV in hot, humid or

excessively dusty places. Do not

install the TV where it may be

exposed to mechanical vibrations.

To prevent ﬁre, keep inﬂammable

objects or naked lights (eg candles)

away from the TV.

Clean the TV with a soft, lightly

dampened cloth. Do not use

benzine, thinner or any other

chemicals to clean the TV. Do not

scratch the TV screen. As a safety

precaution, unplug the TV before

cleaning it.

Pull out the power lead by the

plug. Do not pull on the power

lead itself.

Take care not to place heavy

objects on the power lead as this

could result in damage.

We recommend you wind any

excess lead around the holders

provided on the rear of the TV.

Place the TV on a secure stable

stand. Do not allow children to

climb on to it. Do not place the TV

on its side or face up.

Do not cover the ventilation

openings of the TV with items

such as curtains or newspapers

etc.

Never push objects of any kind into

the set as this could result in a ﬁre or

electric shock. Never spill liquid of

any kind on the set. If any liquid or

solid object does fall through, do not

operate the TV. Have it checked

immediately by qualiﬁed personnel.

For environmental and safety

reasons, it is recommended that the

TV set is not left in standby mode

when not in use. Disconnect from

the mains.

This set is to operate on a 220-240V

AC supply only. Take care not to

connect too many appliances to the

same power socket as this could

result in ﬁre or electric shock.

Unplug the power lead before

moving the TV. Avoid uneven

surfaces, quick steps or excessive

force. If the set has been dropped or

damaged, have it checked

immediately by qualiﬁed service

personnel.

Safet

Information

One Remote Control

(RM-903)

Overview of TV Buttons

Checking the Accessories Supplied

Overview

Two batteries (R6 type)

Overview

Programme up

or down buttons

(selects TV channels)

Selecting

input

source

Auto

Convergence

button

Volume control

buttons

Press on the mark , on the front

of the projection TV to reveal the front

buttons.

Standby indicator

S Video

Input jack

Video Input

jack

Audio Input

jacks

Headphone

jack

On/Off Switch

Press on the mark

to reveal the front

connectors.

903

PROGR

VIDEO TV

VT R 1 2 3 4 DVD

Overview

Overview of Remote Control Buttons

Resetting to factory set levels

Press the to return the picture and sound

settings to factory set levels. This will also

return the set to the install condition, the

“Auto Tuning” menu will appear on the

screen, refer to the section “Switching on the

set and automatically Tuning” (step 4) of this

manual.

VCR on/off

Press to switch your VCR on or off.

Muting the Sound

Press to mute TV sound.

Press again to restore the sound.

Selecting TV mode

Press to switch off Teletext or video input.

PAP (Picture And Picture)

For more details, please refer to the section

"Using PAP (Picture And Picture)".

Selecting Teletext

Press to switch on Teletext.

Displaying EPG

Press to display the Electronic Programme

Guide (EPG). Press again to switch off EPG.

Freezing the picture

Press to freeze the picture. Press again to

return to the normal picture.

Selecting channels

Press to select channels.

For double-digit programme numbers, e.g.

23, press -/-- first, then the buttons 2 and 3.

If you enter an incorrect first digit, this

should be corrected by entering another digit

(0-9) and then selecting -/-- button again to

enter the programme number of your choice.

Selecting Sound mode

Press repeatedly to change the sound mode.

Selecting Picture mode

Press repeatedly to change the picture mode.

Adjusting TV Volume

Press to adjust the volume of the TV.

Displaying the time

Press to switch the time on or off

(available only when teletext is

broadcast).

VCR operation

For more details, please refer to the

section "Remote Control of other

Sony Equipment".

Besides TV functions, all coloured buttons as well as green

symbols are also used for Teletext operation. For more details,

please refer to the "Teletext" section of this instruction manual.

Overview

To Temporarily Switch Off

Press to temporarily switch off TV (the standby

indicator

on the set lights up in red). Press

again to switch on TV from standby mode.

After 15-30 minutes without a signal and

without any button being pressed, the set

switches automatically into standby mode.

Displaying On Screen Information

Press to display all on-screen indications.

Press again to cancel.

Selecting Input source

Press repeatedly until the desired input symbol of

the source appears on the screen.

Back to the channel last watched

Press to watch the last channel selected (watched for

at least 5 seconds).

Selecting Screen format

Press repeteadly to change the format of the screen

(for more details, please refer to the section

“Changing the Screen format”).

Displaying Multi PIP (Picture In Picture)

Press to display Multi PIP mode. Press again to

cancel.

Joystick for menu selection

•When MENU is switched on:

4Scroll Up

$Scroll Down

ZPrevious menu or selection

zNext menu or selection

OK Confirms your selection

•When MENU is switched off:

ZReturn to the last menu screen.

OK Shows a channel overview

Selecting channels

Press to select the next or previous channel.

Displaying the menu system

Press to display the menu on the screen. Press again

to remove the menu display from the screen.

VCR

The Scart lead is optional.

If you use this optional connection it can improve picture and sound quality when using a VCR.

If you do not use a SCART lead, after automatically tuning the projection TV refer to the "Manually Tuning the TV"

section of this instruction manual, to tune in the set to the output of your VCR. Also refer to your VCR instruction manual

to find out how to find the output channel of your VCR.

OUT IN

Installation

Make sure you insert the batteries using the correct polarities.

Always remember to dispose of used batteries in an environmental friendly way.

Inserting Batteries into the Remote Control

Installation

Connecting cables are not supplied.

Connecting the Aerial and VCR

First Time Operation

The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to 1) choose the language

of the menu screen, 2) choose the country in which you wish to operate the set, 3) search and store all available broadcast

channels and 4) change the order in which the broadcast channels appear on the screen.

However, if you need to change the language menu, change the country, change or repeat the tuning (e.g. when you move

house) or rearrange the order of the broadcast channels, you can do that by selecting the appropriate menu in the (Set

Up).

Switching on the set and Automatically Tuning

1Connect the set plug to the mains socket (220-240V AC, 50 Hz). Press

the

on/off button on your set to switch on. The first time you press

this button the Language/Country menu displays automatically on

the screen.

2Push the joystick on the remote control $or 4to select the language,

then press OK to confirm your selection. From now on all the menus

will appear in the selected language.

3Push the joystick $or 4to select the country in which you will

operate the set, then press OK to confirm your selection.

If the country in which you want to use the TV set does not

appear in the list, select “-” instead of a country.

If you are operating the projection TV in the UK, we

reccommend you not to select "Off". Otherwise the On Screen

clock will not show the correct UK time.

4The Auto Tuning menu appears on the screen in the selected

language, then press the OK button on the remote control to select

Yes.

5A new menu appears automatically on the screen asking you to

check that the aerial is connected. Confirm that the aerial is connected

and then press the OK button to start the automatic tuning.

• The TV starts to automatically search and store all available

broadcast channels for you.

• If you have selected the “Off” option in the Country menu and

you activate autotuning again, the TV broadcasts channels

will be stored from the programme number selected at that

time.

This procedure could take some minutes. Please, be patient and

do not press any button. Otherwise the automatic tuning will

not be completed.

continued...

First Time Operation

Language/Country

Language

Country

Select Language: Confirm: OK

4 Italiano

Français

Español

English

Deutsch

Dansk

Čeština

Language/Country

Language

Country

Select Language: Confirm:OK

4 Italiano

Français

Español

English

Deutsch

Dansk

Čeština

Language/Country

Language

Country

Select Language: Confirm: OK

4 Italiano

Français

Español

English

Deutsch

Dansk

Čeština

Language/Country

Language

Country

Select Country:

Confirm: OK

Finland

Denmark

Czech Rep.

Bulgaria

Belgium

Austria

Off

Do you want to start

automatic tuning?

Yes: OK No:

Please confirm that

aerial is connected!

Yes: OK No:

CO2

CO3

CO4

CO7

CO8

Searching...

903

PROGR

VIDEO

First Time Operation

903

PROGR

VIDETV

Programme Sorting

Select Prog: Confirm:

PROG CH LABEL

C03

C05

C07

C08

C09

C11

C12

C13

C14

C15

C16

TV 5

PRO 7

EU-SP

SWF

RTL

SAT

MDR

DDI

DSF

RTL 2

KAB 1

Programme Sorting

Select Position: Move: OK

C03 TV 5

PROG CH LABEL

C03

C05

C07

C08

C09

C11

C12

C13

C14

C15

C16

TV 5

PRO 7

EU-SP

SWF

RTL

SAT

MDR

DDI

DSF

RTL 2

KAB 1

6After all available channels are captured and stored, the

Programme Sorting menu appears automatically on the screen

enabling you to change the order in which the channels appear

on the screen.

a) If you do not wish to change the broadcast channel order, go to step 7.

b) If you wish to change the channel order:

1Push the joystick on the remote control $or 4to select the

programme number with the broadcast channel you wish to

rearrange, then push zto enter.

2Push the joystick $or 4to select the new programme number

position for your selected broadcast channel, then press OK.

The selected channel now moves to its new programme

position and the other broadcast channels move accordingly.

3Repeat steps b1) and b2) if you wish to change the order of the

other broadcast channels.

7 Press the MENU button to exit and return to the normal TV screen.

The set is now ready for use.

First Time Operation

Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of the images.

In that case, proceed as follows.

Adjusting Colour Registration (Convergence)

Auto converge the Red, Green, and

Blue Lines

1Press on the mark , on the front of the projection TV.

2 Press button.

The Auto Convergence function works for about 10 seconds. When the white

cross disappears from the screen, your projection TV is ready for use.

Notes:

The Auto Convergence function does not work when:

• no signal is input.

• the input signal is weak.

• the screen is exposed to spotlights or direct sunlight.

• you watch the teletext broadcast.

• you watch NexTView.

1Press the button on the remote control repeatedly to select one

of the following formats.

Smart: imitation of wide screen effect for 4:3 broadcast.

4:3: conventional 4:3 picture size, full picture information.

14:9: compromise between 4:3 and 16:9 picture size.

Zoom: widescreen format for letterbox movies.

Wide: for 16:9 broadcast.

In Smart, Zoom and 14:9 modes parts of the top and bottom of the

screen are cut off. Press $or 4to adjust the position of the image on

screen (eg to read subtitles).

2Press the OK button to confirm your selection.

Menu System

This feature allows you to change the size of the TV picture.

Changing the Screen Format

1Press the MENU button to switch the first level menu on.

2•To higlight the desired menu or option, push the joystick

4or $.

•To enter to the selected menu or option, push z

•To return to the last menu or option, push Z.

•To alter settings of your selected option, push $/4/Zor z.

•To confirm and store your selection, press OK.

3Press the MENU button to remove the menu from the screen.

Your set uses an on-screen menu system to guide you through the operations. Use the following buttons on the

Remote Control to operate the menu system:

Introducing the Menu system

push $/4/Zor z

press OK

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Detection

Digital Mode

Colour Tone

Personal

DRC 50

Normal

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Detection

Digital Mode

Colour Tone

Personal

DRC 50

Normal

903

PROGR

VIDEO

Joystick:

903

PROGR

VIDEO

4:3

14:9

Zoom

Wide

Smart

10 Menu System

Andere Handbücher für KP-44PS2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Projektionsfernsehen Handbücher

Sony

Sony KP 61V75 Bedienungsanleitung

Sony

Sony KP-46WT520 - Wide Screen Projection Tv Bedienungsanleitung

Sony

Sony KP-EF41ME3 Bedienungsanleitung

Sony

Sony KF-50SX300 Bedienungsanleitung

Sony

Sony Hi-Scan KP-51WS500 Bedienungsanleitung

Sony

Sony KDS-50A2020 - 50" Rear Projection TV Bedienungsanleitung

Sony

Sony GRAND WEGA 2-694-282-13(1) Bedienungsanleitung

Sony

Sony KP-ES48 Bedienungsanleitung

Sony

Sony KP-57XBR10W - 57" Projection Tv Bedienungsanleitung

Sony

Sony KP 51HW40 Bedienungsanleitung

Sony

Sony KP-44PX3 Bedienungsanleitung

Sony

Sony KP-51WS510 Bedienungsanleitung

Sony

Sony KP 51HW40 Benutzerhandbuch

Sony

Sony KP-46WT500 - 46" Hi-scan 1080i 16:9 Projection... Bedienungsanleitung

Sony

Sony KP 43T90 Bedienungsanleitung

Sony

Sony KDS-50A2000 - 50" Rear Projection TV Bedienungsanleitung

Sony

Sony KDS-50A2020 - 50" Rear Projection TV Bedienungsanleitung

Sony

Sony KL-40WA1K Bedienungsanleitung

Sony

Sony KP-51WS510 Bedienungsanleitung

Sony

Sony KDP-57XBR2 - Digital High Definition Projection... Bedienungsanleitung

Sony

Sony KP-41S4K Bedienungsanleitung

Sony

Sony GRAND WEGA KF 60DX100 Bedienungsanleitung

Sony

Sony KDS-R60XBR2 - 60" Class Sxrd™ Xbr Rear Projection... Benutzerhandbuch

Sony

Sony GRAND WEGA KF 42WE610 Bedienungsanleitung

Beliebte Projektionsfernsehen Handbücher anderer Marken

Samsung

Samsung ST-43T6P Bedienungsanleitung

Toshiba

Toshiba ColorStream TP50G60 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-65734 Bedienungsanleitung

Optoma

Optoma EP652A Bedienungsanleitung

Samsung

Samsung SP43T8HPX/XEC Bedienungsanleitung

Philips

Philips 28PW6006 - annexe 1 Bedienungsanleitung

Philips

Philips 43PP8421 Bedienungsanleitung

Hitachi

Hitachi 51F510 Bedienungsanleitung

RCA

RCA P52950 Bedienungsanleitung

Magnavox

Magnavox 51MP392H - 51" Widescreen Hd Ready Tv Bedienungsanleitung

Hitachi

Hitachi 46F510 Bedienungsanleitung

Pioneer

Pioneer Elite PRO 510HD Bedienungsanleitung

Philips

Philips 43PP8421 Handbuch

JVC

JVC I'Art Pro AV-48P776 Bedienungsanleitung

Toshiba

Toshiba 42HM66 - 42" Rear Projection TV Bedienungsanleitung

Philips

Philips 50PL9200D Bedienungsanleitung

Hitachi

Hitachi 51S715 Bedienungsanleitung

Samsung

Samsung HC-P5256W Bedienungsanleitung