Sony VPLVW100 - Full HD Widescreen Projector Bedienungsanleitung
HomeLogic LLC 100 Hoods Lane Marblehead, MA 09145 Phone (781) 639-5155 Fax (781) 639-9677
OneHome
Display Integration Note
Manufacturer: Sony
Model Number(s): VPL-VW100
Comments:
Document Revision Date: 1/10/2006
O
VERVIEW AND
S
UPPORTED
F
EATURES
The projector includes both an RS-232 connection and an Ethernet connection. Either connection can be
used to connect to the OneHome system and provide reliable communications.
THE PROJECTOR SUPPORTS THE FOLLOWING FEATURES:
Choice of Ethernet or RS-232 connections: The projector includes both RS-232 and Ethernet.
Input Selection and Power Control: Select any available input source, turn display off or on.
Display Modes: The following display mode commands are supported from the OneHome system:
Dynamic Standard
Cinema User 1
User 2 User 3
THE PROJECTORS DO NOT CURRENTLY SUPPORT THE FOLLOWING FEATURES:
Dual Display Modes: No picture-in-picture / dual display modes can be set from the OneHome interface.
I
NSTALLATION
O
VERVIEW
1. During the rough-in phase install the necessary power and video cabling for the projector installation.
2. Also during the rough-in phase, run a Cat5 wire from the location of the projector back to the Network
Assembly of the OneHome system to provide either serial or Ethernet needed to control the display.
3. If you are using the RS-232 connection, refer also to the RS-232 Connection Options Integration
Note for other serial connection options.
4. Install the projector and related components.
5. Test the projector to ensure that the sources play correctly stand-alone.
6. Connect the OneHome system to the projector electrically.
7. Configure the OneHome system for the projector and confirm communication between the projector
and the HomeBrick.
8. Test the system by changing sources to confirm the correct video appears.
2 of 5
C
ONNECTION
D
IAGRAMS
OPTION 1: RS-232
BILL OF MATERIALS FOR OPTION 1: RS-232
# Device Manufacturer Part Number Protocol Connector Type Notes
1 DB9M to DB9F NULL Modem Adapter Various RS-232 DB-9 Male X DB-9 Female Must be purchased separately
2 DB9M to RJ45 Adapter HomeLogic HA-CB-307 RS-232 DB-9 Male X RJ-45 Female
3 Cat5 Cable Assy. Installer N/A RS-232 RJ-45 Male X RJ-45 Male
4 Network Assembly HomeLogic HW-NA-18X4 RS-232 RJ-45 Female X DB-9 Female / USB
5 HomeBrick HomeLogic HW-HB-1080 RS-232 DB9 Male / USB
OPTION 2: ETHERNET
BILL OF MATERIALS FOR OPTION 2: ETHERNET
# Device Manufacturer Part Number Protocol Connector Type Notes
1 Cat5 Cable Assy. Installer N/A IP RJ-45 Male X RJ-45 Male
2 Network Assembly HomeLogic HW-NA-18X4 IP RJ-45 Female X RJ-45 Female
3 HomeBrick HomeLogic HW-HB-1080 IP RJ-45 Female
3 of 5
P
ROJECTOR
P
ROGRAMMING
IMPORTANT: This step is only necessary if you are integrating the projector with the Ethernet connection.
If you are using the RS-232 connection this step is not needed.
Set the IP address of the projector using the IR remote included with the projector, and the projector’s on
screen setup menus:
1. Press the Menu button on the remote to bring up the on-screen menu.
2. Press down to scroll to Installation, then press right to select.
3. Press down to scroll to Network Settings, then press right to select.
4. Press right again to select IP Address Setup: this display shows Auto(DHCP) and Manual. Scroll
down to Manual, then press Enter
5. Press down to scroll to IP Address, then press right to highlight the first part of the address. This is
normally 192.
6. Press up or down to change to the desired value, then press right to go to the next number. This is
normally 168.
7. Repeat for remaining the remaining numbers: the default address is 192.168.0.70.
8. Press Enter to accept the changes.
9. Confirm that the subnet is set to 255.255.255.0.
10. It is OK to ignore the Default Gateway and DNS settings.
11. Press down to scroll to Apply, then press Enter to save your settings.
12. Press the Menu button to exit the on-screen menu.
4 of 5
H
OME
L
OGIC
C
ONFIGURATION
D
ETAILS
The following table provides settings used in the HomeLogic Configurator. Please refer to the Configurator Reference Guide for more details.
o“<Select>” Select the appropriate item from the list (or drop-down) in the Configurator.
o“<User Defined>”, etc. Type in the desired name for the item.
O
PTION
1:
RS-232
Devices Variable Name Setting Comments
Communication Devices Name
<User Defined> (Default:
Sony VPL-VW100
)
Type Serial Port
Communication Type Standard Connection
Location <User Defined> (Not Required)
COM Port <Select>
Video Display Name
<User Defined> (Default:
Sony VPL-VW100 (RS-232)
)
Device Type Sony VPL-VW100 (RS-232)
Location <User Defined> (Not Required)
COM Device
<Select> (Default:
Sony VPL-VW100
)
O
PTION
2:
E
THERNET
Devices Variable Name Setting Comments
Communication Device N/A (See Note 1) N/A (See Note 1)
Video Display Name
<User Defined> (Default:
Sony VPL-VW100 (Network)
)
Device Type Sony VPL-VW100 (Network)
Location <User Defined> (Not Required)
IP Address <User Defined> (Default:
192.168.0.70
) (See Note 2)
Port 53484
Notes:
1. No
Communication Device
is needed: just add
Video Displays
.
2. By default, set the first camera to 192.168.0.70, the second to 192.168.0.71, and so on.
5 of 5
C
OMMON
M
ISTAKES
Andere Handbücher für VPLVW100 - Full HD Widescreen Projector
3
Andere Sony Projektor Handbücher
Sony
Sony VPL-V500Q Bedienungsanleitung
Sony
Sony VPH-G70VRU Bedienungsanleitung
Sony
Sony VPLEW225 Bedienungsanleitung
Sony
Sony VPL-EW5 Service-Handbuch
Sony
Sony KP-46V25 Bedienungsanleitung
Sony
Sony VPL-VW1000ES Bedienungsanleitung
Sony
Sony Superlite VPL-CX6 Bedienungsanleitung
Sony
Sony VPLGH10 Bedienungsanleitung
Sony
Sony VPL-PX11 Bedienungsanleitung
Sony
Sony KP-46S25 Bedienungsanleitung
Sony
Sony Cineza VPL-HS2 Bedienungsanleitung
Sony
Sony VPL-CX3 - XGA LCD Projector Bedienungsanleitung
Sony
Sony VPL-CX276 Service-Handbuch
Sony
Sony VPL-FX50 Bedienungsanleitung
Sony
Sony VPL-CX76 Bedienungsanleitung
Sony
Sony VPH-1041Q Bedienungsanleitung
Sony
Sony VPL-AW10 (VPLAW10 and VPLAW15) Bedienungsanleitung
Sony
Sony SXRD SRX-R110 Bedienungsanleitung
Sony
Sony VPL-VW11HT - Lcd Video Projector Bedienungsanleitung
Sony
Sony VPL-VW270/W Service-Handbuch
