Sony BDX-N1000 Bedienungsanleitung

NETWORK INTERFACE UNIT

BDX-N1000

NETWORK ADAPTER BOARD

BDKP-N1001

NETWORK ADAPTER BOARD

BDKP-N1002

NETWORK ADAPTER BOARD

BDKP-N1003

NETWORK ADAPTER BOARD

BDKP-N1004

INSTALLATION MANUAL

1st Edition (Revised 1)

!WARNING

This manual is intended for qualified service personnel only.

To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that

contained in the operating instructions unless you are qualified to do so. Refer all servicing to

qualified service personnel.

!WARNUNG

Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.

Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die

Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei

Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben

Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung

dazu besitzen.

!AVERTISSEMENT

Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin

de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les

réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.

Pour toute réparation faire appel à une personne compétente uniquement.

BDX-N1000 Serial No. 10001 and Higher

BDKP-N1001 Serial No. 10001 and Higher

BDKP-N1002 Serial No. 10001 and Higher

BDKP-N1003 Serial No. 10001 and Higher

BDKP-N1004 Serial No. 10001 and Higher

BDX-N1000

1 (P)

Attention-when the product is installed in Rack:

(For BDX-N1000)

1. Prevention against overloading of branch circuit

When this product is installed in a rack and is

supplied power from an outlet on the rack, please

make sure that the rack does not overload the supply

circuit.

2. Providing protective earth

When this product is installed in a rack and is

supplied power from an outlet on the rack, please

confirm that the outlet is provided with a suitable

protective earth connection.

3. Internal air ambient temperature of the rack

When this product is installed in a rack, please make

sure that the internal air ambient temperature of the

rack is within the specified limit of this product.

4. Prevention against achieving hazardous

condition due to uneven mechanical loading

When this product is installed in a rack, please make

sure that the rack does not achieve hazardous

condition due to uneven mechanical loading.

BDX-N1000

(For BDKP-N1002)

Laser Diode Properties

Material : InGaAsP

Wave length : 1300 nm

Emission duration : Continuous

Laser output power (average): 0.16 mW (max.)

CAUTION

The use of optical instruments with this product

will increase eye hazard.

CLASS 1

LASER PRODUCT

LASER KLASSE 1

PRODUKT

This Network Interface Unit is classified as a CLASS 1

LASER PRODUCT.

The CLASS 1 LASER PRODUCT label is located on the

rear panel.

1 (E)

BDX-N1000

Table of Contents

Manual Structure

Purpose of this manual ......................................................................................... 3 (E)

Related manuals.................................................................................................... 3 (E)

Contents ................................................................................................................ 3 (E)

Trademark ............................................................................................................. 3 (E)

1. Installation

1-1. Installation Environment ........................................................................ 1-1 (E)

1-2. Power Supply ......................................................................................... 1-1 (E)

1-2-1. Power Specifications ............................................................. 1-1 (E)

1-2-2. Power Cord ............................................................................ 1-1 (E)

1-3. External Dimensions .............................................................................. 1-2 (E)

1-4. Rack Mounting ....................................................................................... 1-3 (E)

1-5. Matching Connectors and Cables........................................................... 1-6 (E)

1-6. Input and Output Signals of Connectors ................................................ 1-7 (E)

1-7. Internal Switches and Indicators ............................................................ 1-8 (E)

1-7-1. IF-694 Board ......................................................................... 1-8 (E)

1-7-2. CCM-36 Board (BDKP-N1001) ........................................... 1-9 (E)

1-7-3. CCM-36A Board (BDKP-N1002) ...................................... 1-10 (E)

1-7-4. CCM-40 Board (BDKP-N1003) ......................................... 1-10 (E)

1-7-5. CCM-40A Board (BDKP-N1004) ...................................... 1-11 (E)

2. Installation of Optional Boards

2-1. Overview of Optional Boards ................................................................ 2-1 (E)

2-2. BDKP-N1001/N1002 Installation .......................................................... 2-2 (E)

2-2-1. Installation Procedure ............................................................ 2-2 (E)

2-2-2. Confirmation After Installation ............................................. 2-3 (E)

2-3. BDKP-N1003/N1004 Installation .......................................................... 2-5 (E)

2-3-1. Installation Procedure ............................................................ 2-5 (E)

2-3-2. Confirmation After Installation ............................................. 2-6 (E)

3. Service Overview

3-1. Cleaning of Air Filter ............................................................................. 3-1 (E)

3-2. Internal Indicators on Board................................................................... 3-2 (E)

3-2-1. IF-694 Board ......................................................................... 3-2 (E)

3-2-2. CCM-36 Board (BDKP-N1001)/

CCM-36A Board (BDKP-N1002) ........................................ 3-4 (E)

3-2-3. CCM-40 Board (BDKP-N1003)/

CCM-40A Board (BDKP-N1004) ........................................ 3-5 (E)

3 (E)

BDX-N1000

Manual Structure

Purpose of this manual

This manual is the installation manual of the BDX-N1000 Network Interface Unit

and the BDKP-N1001/N1002/N1003/N1004 Network Adapter Boards.

This manual is intended for use by trained system and service engineers, and

describes information regarding installation.

Related manuals

Besides this installation manual, the following manuals are available for the BDX-

N1000.

.Operation Manual (Supplied with the BDX-N1000)

This manual explains the overview of the BDX-N1000, and the system configura-

tion examples.

.Maintenance Manual (Not supplied with the BDX-N1000)

This manual describes the information that premise the service based on parts

replacement (adjustments, board layouts, schematic diagrams, parts list, etc.).

If this manual is required, contact your local Sony Sales Office/Service Center.

Contents

The following is a summary of all the sections for understanding the contents of this

manual.

Section 1 Installation

Explains the operating environment, the connector information for peripheral

equipment connections and how to rack mounting, etc.

Section 2 Installation of Optional Boards

Explains how to install the optional boards BDKP-N1001/N1002/N1003/N1004.

Section 3 Service Overview

Explains the cleaning of the air filter and description of internal indicators.

Trademark

Trademarks and registered trademarks used in this manual are follows.

.Ethernet is a registered trademark of Xerox Corporation.

1-1 (E)

BDX-N1000

Section 1

Installation

1-1. Installation Environment

Operating temperature : 5 dC to 40 dC

Storage temperature : _20 dC to +55 dC

Operating humidity : 20 % to 90 %

(non-condensing)

Do not install the BDX-N1000 in the following locations.

.Areas where the unit will be exposed to direct sun light

or any other strong lights.

.Areas near heat sources.

.Dusty areas or areas where it is subject to vibration.

.Areas with strong electric or magnetic fields.

.Areas where is subjected to electricity noise.

.Areas where is subjected to static electricity noise.

To prevent the temperature rise inside the BDX-N1000,

pay careful attention to circulation of air in the place where

the BDX-N1000 is installed.

The rear side of the BDX-N1000 should be at least 20 cm

(8 inches) away from walls for ventilation and

maintenance.

Do not block the ventilation holes.

If the ventilation holes are blocked, the temperature inside

the BDX-N1000 getting rise. This may cause a fire.

1-2. Power Supply

1-2-1. Power Specifications

Power requirements : 100 to 240 V AC

50/60 Hz

Current consumption : maximum 0.5 A (at 100 V)

maximum 0.3 A (at 240 V)

A switching regulator is used for the power supply of the

BDX-N1000. The voltage within the range of 100 V to

240 V can be used without changing the supply voltage.

As the inrush current at turn-on is maximum 45 A (at

100 V)/maximum 90 A (at 240 V), the capacity of the AC

power must be adequate with the inrush current of maxi-

mum 45 A (at 100 V)/maximum 90 A (at 240 V).

If the capacity of the AC power is not the adequately large,

the breaker of the AC power at the supply side will operate

or the BDX-N1000 will abnormal operate.

1-2-2. Power Cord

.Use the specified power cord. If the power cord that is not

specified is used, it may cause a fire or an electric shock.

.Do not damage the power cord. If the power cord is

damaged, it may cause a fire or an electric shock.

For the customer outside of the area as shown above or in a

part of Europe, the above-mentioned power cords con not

be used.

Use the power cord that is applicable to the places in the

world.

1 2

Power cord for the customer in the U.S.A. and Canada.

1Power cord set !1-557-377-41

2Plug holder (Black) 2-990-242-01

AC inlet

For customers in European countries except the United Kingdom

1Power cord, 250 V 10 A (2.4 m) : !1-551-631-15

2Plug holder (Brown) : 3-613-640-01

AC inlet

For customers in the United Kingdom

1Power cord, 250 V 10 A (2.4 m) : !1-782-165-11

2Plug holder (Brown) : 3-613-640-01

AC inlet

1-2 (E) BDX-N1000

1-3. External Dimensions

Mass : 5.1 kg (including optional board)

Unit : mm

Tx Rx ALARM

POWER

481.5

465

374

424 49 360

123.8

263.5

72.7

450 16

8.3 43.6

(Top view)

(Front view) (Right side view)

NETWORK INTERFACE UNIT BDX-N1000

Andere Handbücher für BDX-N1000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Aufnahmegeräte Handbücher

Sony

Sony PCM-7040 Bedienungsanleitung

Sony

Sony RCD-W2000ES - Cd/cdr Recorder Bedienungsanleitung

Sony

Sony MU-R201 Bedienungsanleitung

Sony

Sony SIU-100 Bedienungsanleitung

Sony

Sony PCM-3348HR Bedienungsanleitung

Sony

Sony PDW-HD1550 Bedienungsanleitung

Sony

Sony SRMASTER SR-PC4 Bedienungsanleitung

Sony

Sony HXR-IFR5 Bedienungsanleitung

Sony

Sony HAR-D1000 - Hard Disc Audio Recorder Bedienungsanleitung

Sony

Sony BKM-103 Bedienungsanleitung

Sony

Sony SEQ-711 Bedienungsanleitung

Sony

Sony PFV-L10 Bedienungsanleitung

Sony

Sony DMX-R100 Bedienungsanleitung

Sony

Sony Video Walkman GV-S50 Bedienungsanleitung

Sony

Sony RCD-W222ES - Cd/cdr Recorder Bedienungsanleitung

Sony

Sony PCM-3348HR Bedienungsanleitung

Sony

Sony DMX-R100 Bedienungsanleitung

Sony

Sony WX-C55 Bedienungsanleitung

Sony

Sony PFV-L10 Bedienungsanleitung

Sony

Sony TCM-4300 Bedienungsanleitung

Sony

Sony TCD-D3 Bedienungsanleitung

Sony

Sony DPA-300 Bedienungsanleitung

Sony

Sony MSW-A2000 Bedienungsanleitung

Sony

Sony ICD-SX713/ICD-SX813 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch