Sony RM-LVR3 Bedienungsanleitung

Live-View Remote

RM-LVR3

Read This First

Identifying the parts [1]

Screen display during single connection [2]

Screen display during multi connection [3]

Getting Started

Charging the remote control [4]

Attaching the remote control to the belt [5]

Attaching the remote control to the Mount Adaptor [6]

Turning on/off the power of the remote control [7]

Setting the date and time [8]

Connecting the remote control to a camera via Wi-Fi (Single connection)

Checking the connection mode [9]

Connecting the remote control to a single camera via Wi-Fi [10]

Connecting the remote control to multiple cameras via Wi-Fi (Multi connection)

Connecting the remote control to multiple cameras via Wi-Fi [11]

Resetting the connection information of the registered camera [12]

Shooting

Shooting movies and still images

Switching shooting modes [13]

Shooting [14]

Using the zoom [15]

Operating with the multi camera control [16]

Button hold function [17]

Changing the Settings

List of setting items

List of setting items [18]

How to set the setting items [19]

Shooting settings

Image quality setting [20]

Movie format [21]

Time-lapse capture image size [22]

Loop recording time [23]

Still image mode switching [24]

Still image shooting interval [25]

Self-timer [26]

Time-lapse shooting interval [27]

Time-lapse shot number [28]

SteadyShot (Movie) [29]

SteadyShot (Still) (FDR-X3000/HDR-AS300) [30]

Angle setting [31]

Zoom setting [32]

Flip [33]

AE shift [34]

Time-lapse AE mode [35]

Scene [36]

White balance [37]

Color mode [38]

Audio recording setting [39]

Wind noise reduction [40]

Camera settings

Bluetooth remote controller power setting [41]

Format [42]

Time code/user bit [43]

IR remote [44]

Beep [45]

Beep volume [46]

Lamp setting [47]

One touch recording [48]

Auto power off [49]

Switching NTSC/PAL [50]

Version (Camera) [51]

Remote control settings

Airplane mode [52]

Connection mode [53]

Bluetooth setting [54]

Network reset settings [55]

Auto monitor off while shooting [56]

Mirror Mode [57]

Display rotate [58]

Monitor brightness [59]

Date & time setting [60]

Area setting [61]

Daylight saving time (summer time) setting [62]

Date format [63]

Version [64]

Resetting the settings [65]

Viewing

Playing back images [66]

Deleting images [67]

Information

Precautions

Handling [68]

On moisture condensation [69]

On carrying [70]

On operating temperatures [71]

Handling the LCD screen [72]

Waterproof performance [73]

The list of time differences for world capitals [74]

Specifications [75]

Trademarks [76]

Note on the License [77]

Care and storage

Care and storage [78]

Maintenance of the LCD screen [79]

Maintenance of the remote control in water or at a waterfront [80]

Battery pack

Battery pack [81]

To reduce the battery consumption of the remote control [82]

Disposal of the remote control [83]

Troubleshooting

Cannot connect the remote control and the camera via Wi-Fi. [84]

Cannot turn on the remote control. [85]

The power of the remote control turns off suddenly. [86]

Cannot charge the remote control. [87]

The remaining charge indicator is incorrect. [88]

Warning indicators and error messages

Error display on the Live-View Remote [89]

[1] Read This First

Identifying the parts

[2] Read This First

Screen display during single connection

The indicators described below are displayed on the LCD screen during single connection.

The indicators differ depending on the connected camera.

The following illustration is an example shown in movie mode.

The indicators in parentheses are displayed when shooting still images.

Icons differ depending on the settings.

Terminal section

1. (on/standby) button

2. CHG (Charge) lamp

3. LCD screen

4. UP button/DOWN button

5. REC/ENTER button

6. REC/Wi-Fi lamp

7. MENU button

Wi-Fi connection setting

1. Bluetooth connection status

2. GPS receiving status of a camera

3. Clock time

4. Remaining battery charge indicator of the camera

5. Battery level indicator of the remote control

[3] Read This First

Screen display during multi connection

The indicators described below are displayed on the LCD screen during multi connection.

When the remaining battery charge decreases, the battery level indicator will change in the

direction of an arrow.

Button hold icon

7. UP button/DOWN button operation guide

8. Zoom ratio

9. Angle setting

.SteadyShot setting

.Shooting setting

movie format , frame rate , still image mode , self-timer , time-lapse

shooting interval , time-lapse shot number

Recordable time/Recording time/Memory card warning icon

(recordable number)

.Shooting mode indicator

During movie recording, appears. During still image shooting, appears. During time-

lapse capturing, appears. During loop recording, appears.

“” is displayed on the upper right area of an icon while recording.

Audio recording setting

.Temperature increase indicator

is displayed when the temperature of the connected camera increases.

Leave the power turned off to allow the temperature of the camera or the battery to decrease.

Mirror Mode setting

Wi-Fi connection setting

1. Bluetooth connection status

2. Clock time

3. Battery level indicator of the remote control

[4] Getting Started

Charging the remote control

Charge the remote control using power supplied from the computer.

When the remaining battery charge decreases, the battery level indicator will change in the

direction of an arrow.

UP button/DOWN button operation guide

Switches the connected camera.

Shooting mode indicator/REC icon

The shooting mode and recording status of the connected camera are displayed. The position

of the orange cursor indicates which camera is currently displaying Live-View.

“” is displayed on the upper right area of an icon while recording.

Temperature increase indicator

is displayed when the temperature of the connected camera increases.

Leave the power turned off to allow the temperature of the camera or the battery to decrease.

Check that the power of the remote control is turned off.

Attach the remote control to the cradle (supplied).

If the terminal section of the remote control is wet or dirty, wipe away the moisture or dust

before attaching.

Battery charging time

*1 as follows.

Via a computer: Approx. 2 hours 25 minutes

Hint

A remaining charge indicator appears on the upper right area of the LCD screen.

The displayed remaining charge indicator may not be correct under certain circumstances.

It takes about 30 seconds until the correct remaining charge indicator appears.

If the battery pack runs out quickly even though the remaining charge indicator is high, fully charge the

remote control again. The remaining charge indicator will be then displayed correctly. Note that it may not

be displayed correctly in the following situations:

The remote control is used for a long time at high ambient temperature.

The remote control is left fully charged.

The remote control is used heavily.

Use the AC Adaptor (sold separately) for charging if you do not have a computer.

You can charge the remote control even if it is not completely discharged. Also, even if the remote control is

not fully charged, you can use the partial charge capacity of the battery pack as is.

When the remote control is fully charged, the CHG (Charge) lamp turns off immediately.

Note

When the power of the remote control is turned on, it is supplied with power but not charged.

Be careful not to short out the terminal section of the cradle by using materials such as metals.

To maintain the remote control’s function, fully charge the remote control at least once from six months to a

year while storing. Also, store it in a cool, dry place.

[5] Getting Started

Connect the remote control to an activated computer with the micro USB cable

(supplied).

The CHG (Charge) lamp lights up in amber and charging begins.

The CHG (Charge) lamp turns off when charging is completed.

Time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer under

certain circumstances or conditions.

Rapid charging is possible by using the AC Adaptor (sold separately). To connect to the AC Adaptor, use the micro USB

cable (supplied).

Attaching the remote control to the belt

Attach the remote control to the belt.

Note

Attaching the belt incorrectly may cause injury.

Be careful not to drop the remote control when unfastening the belt.

Align the protruding portion of the remote control with the concave portion of the

belt, while pulling the release lever on the rear of the belt toward the opposite side

with your finger.

Make sure that the remote control is set into the belt, then remove your finger from

the release lever.

To fasten the remote control to your arm, pass the one end of the belt through the

hole on the other end of the belt, and fasten the belt with . Then slide to hold

the belt securely.

Andere Handbücher für RM-LVR3

Inhaltsverzeichnis

Andere Sony Fernbedienung Handbücher

Sony

Sony RM-V10T Bedienungsanleitung

Sony

Sony RMT-TX210E Bedienungsanleitung

Sony

Sony RM-AV3000 Bedienungsanleitung

Sony

Sony RM-VLZ620 Bedienungsanleitung

Sony

Sony RM-V202 Bedienungsanleitung

Sony

Sony RCP-D50 Bedienungsanleitung

Sony

Sony RM-V310A Bedienungsanleitung

Sony

Sony RM-V202 Bedienungsanleitung

Sony

Sony RM-X114 Bedienungsanleitung

Sony

Sony RMF-YD001 Bedienungsanleitung

Sony

Sony RM-VL700T Administratorhandbuch

Sony

Sony RM-V210 - Universal Remote Gebrauchs- und Wartungshandbuch

Sony

Sony PlayStation Portal Bedienungsanleitung

Sony

Sony RM-PP404 Bedienungsanleitung

Sony

Sony RM -NX7000 Bedienungsanleitung

Sony

Sony RM-X5S Bedienungsanleitung

Sony

Sony RM-LF204 Bedienungsanleitung

Sony

Sony RM-V20T Bedienungsanleitung

Sony

Sony RM-US106 Bedienungsanleitung

Sony

Sony RMT-VP1K Bedienungsanleitung

Sony

Sony RM-BR300 - Remote Control Unit Bedienungsanleitung

Sony

Sony RMT-DSLR1 - Alpha Camera Remote Bedienungsanleitung

Sony

Sony RM-AV3000 Bedienerhandbuch

Sony

Sony RM-IP500 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung