Sony RM -NX7000 Bedienungsanleitung

RM -NX7000

Integrated Remote

Commander

Operating Instructions

3-254-727-11(1)

Integra te d Remot e Com ma nder

RM-NX7000

Downloaded from: https://www.usersmanualguide.com/

•Memory Stick and are trademarks of Sony Corporation.

•Memory Stick Duo, and “Memory Stick PRO” are trademarks

of Sony Corporation.

•“TouchEngine” is a trademark of Sony Corporation.

•Microsoft and Windows are registered trademarks of Microsoft Corporation in

the United States and/or other countries.

•All other names of systems and products are trademarks or registered

trademarks of their respective owners. ™ and ®marks are omitted in this

manual.

• Microsoft®Windows®XP Professional and Microsoft®Windows®XP Home

Edition are mentioned as Windows XP in this manual.

• Microsoft®Windows®2000 Professional is mentioned as Windows 2000 in this

manual.

• Microsoft®Windows®Millennium Edition is mentioned as Windows Me in

this manual.

• Microsoft®Windows®98 Second Edition is mentioned as Windows 98 SE in

this manual.

•Copyright laws prohibit reproducing the software supplied with this Remote

Commander or the manual accompanying it in whole or in part, or renting

the software without the permission of the copyright holder.

• In no event will SONY be liable for any financial damages, or loss of profits,

including claims made by third parties, arising out of the use of the software

supplied with this Remote Commander.

• In the event a problem occurs with this product as a result of defective

manufacturing, SONY will replace it. However, SONY bears no other

responsibility.

• The software provided with this Remote Commander cannot be used with

equipment other than that which is so designated.

• Please note that, due to continued efforts to improve quality, the

specifications of the software supplied with this Remote Commander may be

changed without notice.

Downloaded from: https://www.usersmanualguide.com/

WARNING

To prevent fire or shock hazard, do

not expose the unit to rain or

moisture.

To avoid electrical shock, do not

open the cabinet. Refer servicing to

qualified personnel only.

For the customers in the U.S.A.

Ow ner’s Record

The model number is located on the rear

panel.

The serial number is located next to the

Reset button inside the “Memory Stick”

slot cover.

Record these numbers in the spaces

provided below.

Refer to them whenever you call upon

your Sony dealer regarding this product.

Model No. RM-NX7000

Serial No.

You are cautioned that any changes or

modifications not expressly approved in

this manual could void your authority to

operate this equipment.

If you have any questions about this

product, contact:

Declaration of Conformity

Trade Name SONY

Model No. RM-NX7000

Responsible Party Sony Electronics Inc.

Address 16450 W. Bernardo Dr, San Diego, CA 92127 USA

Telephone No. 858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Note:

This equipment has been tested and found

to comply with the limits for a Class B

digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against

harmful interference in a residential

installation. This equipment generates,

uses and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may

cause harmful interference to radio

communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by

turning the equipment off and on, the user

is encouraged to try to correct the

interference by one or more of the

following measures:

–Reorient or relocate the receiving

antenna.

–Increase the separation between the

equipment and receiver.

–Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced

radio/TV technician for help.

Sony Remote Support site

<http://www.sony.com/nxremotesupport>

or Sony Remote Support Line

1-(866)-922-7669

Downloaded from: https://www.usersmanualguide.com/

Table of Content s

Continued

Features ........................................................................................................................... 8

Getting Started

Unpacking ..................................................................................................................... 11

Preparing RM-NX7000 ................................................................................................ 12

Charging ....................................................................................................................... 14

Using the touch panel display ................................................................................... 16

Calibrating the touch panel display (ALIGNMENT) ................................................ 16

Location and Function of Controls ........................................................................... 17

Screen layout and elements ........................................................................................... 21

Setting up the Remote Commander using “NAVITUS Design” .......................... 25

Basic Operations

Basic Operations of the Remote Commander ......................................................... 37

Operating a component (Operation mode) ................................................................. 37

Entering the Set display (Setting mode) ....................................................................... 39

Inputting letters (label setting) ...................................................................................... 40

Programming the preset codes of components (PRESET) ..................................... 42

Default settings of Component keys ............................................................................ 42

Programming a preset code ........................................................................................... 43

Using the Direct Access buttons (DIRECT ACCESS) ............................................. 52

Setting the label of a Direct Access button ................................................................... 52

Programming an action to skip to the desired page for a Direct Access button .... 55

Programming remote control signals for a key or button – Learning function

(LEARN) .................................................................................................................... 58

Deleting the learned remote control signal ................................................................. 64

Customizing the Display

Customizing the Home display (HOME EDIT) ...................................................... 67

Changing the assignment of a Component key (MOVE) .......................................... 69

Deleting a Component key (DELETE) ......................................................................... 72

Setting the skin (key appearance and color) and the label (name) of the

Component key (SKIN/LABEL) ................................................................................ 74

Copying a Component key (DUPLICATE) ................................................................. 77

Creating a new Component key (NEW) ...................................................................... 80

Creating an Alias Component key (ALIAS) ................................................................ 83

Adding/deleting a page of the Home display (PAGE) ............................................. 85

Downloaded from: https://www.usersmanualguide.com/

Continued

Table of Contents

Customizing the Component display (COMPONENT EDIT) .............................. 88

Changing the assignment of a function key (MOVE) ................................................ 89

Deleting a function key (DELETE) ................................................................................ 92

Setting the skin (key appearance and color) and the label (name) of a function

key (SKIN/LABEL) ...................................................................................................... 97

Setting a function key of another component to a Component display (ALIAS)... 100

Setting a wallpaper (WALLPAPER) ............................................................................ 103

Adding/deleting a page of the Component display (PAGE) ................................. 105

Assigning function keys of multiple AV components to a Component display ... 109

Convenient operations by programming a series of actions

(macro) for a key/ button

Outline of a series of actions (macro)....................................................................... 113

What is a macro ?........................................................................................................... 113

Programming a series of actions (macro) for a key/button ................................. 115

Step 1: Selecting a key/button you want to program a macro for ......................... 115

Step 2: Setting a macro .................................................................................................. 120

Macro operation using the Timer function ............................................................ 127

About the edit display for the Timer program key .................................................. 127

Step 1: Creating a Timer program key ........................................................................ 129

Step 2: Setting the time ................................................................................................. 132

Step 3: Programming a macro ..................................................................................... 135

Programming a series of actions (macro) for a Component

List

Outline of a Component List ................................................................................... 147

What is a Component List? .......................................................................................... 147

Programming a List element .................................................................................... 148

About the edit display for a List element .................................................................. 148

Step 1: Creating a List element .................................................................................... 150

Step 2: Programming a macro ..................................................................................... 154

Creating a User List (USER LIST)............................................................................ 157

About the edit display for a User List ........................................................................ 157

Creating a User List key ............................................................................................... 159

Adding an element to a User List ............................................................................... 164

Using the Component List ....................................................................................... 169

Downloaded from: https://www.usersmanualguide.com/

Easy selection of a series of actions (macro) programmed

for Zapping (ZAPPING)

Outline of Zapping .................................................................................................... 172

What is Zapping? .......................................................................................................... 172

Editing the Zapping function .................................................................................. 174

About the edit display for Zapping ............................................................................ 174

Step 1: Creating a Zapping group ............................................................................... 176

Step 2: Creating a Zapping element ............................................................................ 178

Step 3: Programming a macro ..................................................................................... 180

Step 4: Creating a Zapping viewer ............................................................................. 182

Using a “M emory Stick”

About a “Memory Stick” .......................................................................................... 198

Inserting a “Memory Stick” ......................................................................................... 200

Removing a “Memory Stick” ....................................................................................... 201

Reading data saved in a “Memory Stick” (READ) ............................................... 202

Saving Remote Commander data to a “Memory Stick” (SAVE) ........................ 207

Remote Commander’s Other Functions

Setting the Display Window .................................................................................... 212

Calibrating the touch panel display (ALIGNMENT) .............................................. 212

Setting the Backlight Automatic-Off time (BACK LIGHT) ..................................... 214

Setting the Automatic-Off time of the display window (OFF TIME) .................... 216

Adjusting the brightness of the display window’s backlight (BRIGHTNESS) .... 218

Setting the system clock (CLOCK) .......................................................................... 220

Setting the beep sound (BEEP) ................................................................................ 222

Locking the settings (LOCK).................................................................................... 223

Remote Commander information (ABOUT) ......................................................... 224

Setting to the recovery mode (RECOVERY) .......................................................... 225

Using the application mode ..................................................................................... 226

Cleaning the Remote Commander ............................................................................. 226

Displaying image files set as wallpapers ................................................................... 227

Additional Information

Precautions ................................................................................................................. 229

Troubleshooting ......................................................................................................... 231

Specifications .............................................................................................................. 248

Downloaded from: https://www.usersmanualguide.com/

Features

The multi functional remote control, RM-NX7000, allows you to control multiple

AV components, lighting equipment, and air-conditioners with one remote

control. The following features are provided.

Easy t o use int erf ace

65,536 color operation display

The Remote Commander is equipped

with a vividly clear 65,536 color TFT

LCD operation display for

comfortable operation.

High-speed performance

High-speed CPU for smooth

operation of the Remote Commander.

Computer Interface

The Remote Commander provides a

USB connector and a “Memory Stick”

slot, which allows you to exchange

data with your computer. The high-

speed data transfer USB connection

allows for stress-free exchange of data

with your computer.

Tactile response panel

The Remote Commander is equipped

with the tactile response panel with

the TouchEngine™ technology

providing a realistic “click feel” to a

key when you press it.

Easy setting of the remote control

codes

The intelligent code setting system

simplifies a usually complicated code

setting process.

Extended functions of the

Remote Com mander

Customizing of the operation

display

You can customize the operation

display according to your preference.

You can create your own personal

easy-to-use display by changing the

design, allocation of keys, etc.

Direct Access Buttons that call up

desired pages w ith just one button

You can program frequently used-

pages, etc., for the Direct Access

Buttons, then the page is called up by

simply pressing a single button.

M acro function – A series of

operations at the touch of a button

A macro is a programmed series of

actions condensed into the function of

one button.

If you program several operations

(such as turning on the TV and

selecting a channel) for a key as a

macro, multiple remote control

signals are sent by pressing the one

key.

Component List for easy selection

of a CD or a channel

A Component List shows what

objects a component handles.

For example, if you register CDs in

the CD changer to a Component List,

you can play back a desired CD just

by selecting it from the list. The

Component List can be displayed by

category, such as by artist name,

genre, etc.

Downloaded from: https://www.usersmanualguide.com/

Zapping function for easy selection

of a channel

Zapping is the function to call up

only desired channels sequentially,

making channel selection (from a

multitude of channels) easy.

For example, if you create a Zapping

group gathering only sports channels,

or movie channels, you can select a

desired channel from the Zapping

group.

M ulti Component keys for

operating multiple components on

one display

You can assign function keys of

multiple components to a single

component display.

For example, when you watch a DVD

with a home theater system, if you

playing back a DVD to a key, you can

operate those components in one

display.

“NAVITUS Design” for setting the

Remote Commander more simply

and freely

The supplied software “NAVITUS

Design” allows you to set up the

Remote Commander on your

computer and download the settings

to the Remote Commander. Various

advanced settings can be made easily

on your computer. You also can

download the data from the web site

to program components, and import

a desired image from your computer

to customize the operation display.

Product regist ration

For customers w ho purchased this

product in the USA

Please register this product on line at

www.sony.com/ productregistration

<http://www.sony.com/productregistration>

Proper registration will enable us to

send you periodic mailings about

software upgrades, new products,

services and other important

announcements. Thank you.

If you have any questions about

this product, contact:

w w w.sony.com/ nxremotesupport

or Sony Remote Support Line

1-(866)-922-7669

Downloaded from: https://www.usersmanualguide.com/

Getting Start ed

Downloaded from: https://www.usersmanualguide.com/

Inhaltsverzeichnis

Andere Sony Fernbedienung Handbücher

Sony

Sony RM-VL700S Administratorhandbuch

Sony

Sony RM-95 Bedienungsanleitung

Sony

Sony RM-AX4000 - Integrated Remote Commander Bedienungsanleitung

Sony

Sony RM-V302 Bedienungsanleitung

Sony

Sony RM-LJ304 Bedienungsanleitung

Sony

Sony RM-PP404 Bedienungsanleitung

Sony

Sony RM-IP500 Bedienungsanleitung

Sony

Sony RM-NX7000 Navitus Kurzanleitung

Sony

Sony RMT-VP1K Bedienungsanleitung

Sony

Sony RM-AV2000T Bedienungsanleitung

Sony

Sony RM-AV3000 Bedienerhandbuch

Sony

Sony RM-V302 Administratorhandbuch

Sony

Sony RM-V80T Bedienungsanleitung

Sony

Sony RM-V211T Bedienungsanleitung

Sony

Sony RM-VL610A (RM-VL610A Remote Commander®) Bedienungsanleitung

Sony

Sony Vaio VGP-BRMP10 Bedienungsanleitung

Sony

Sony RM-LJ304 Bedienungsanleitung

Sony

Sony RM-TP504 Bedienungsanleitung

Sony

Sony RM-AX5000 Bedienungsanleitung

Sony

Sony RM-V12 Bedienungsanleitung

Sony

Sony RM-V202T Bedienungsanleitung

Sony

Sony RM-AV3000T Bedienungsanleitung

Sony

Sony RM-AX4000 - Integrated Remote Commander Bedienungsanleitung

Sony

Sony RMT-DSLR2 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung