Sony RM-VL600 Bedienungsanleitung

2-674-860-12 (1)

Integrated Remote

Commander

Operating Instructions

RM-VL600

For the customers in the U.S.A.

WARNING

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly

approved in this manual could void your authority to operate this

equipment.

Features

The RM-VL600 Remote Commander provides centralized control of all

your AV components from a single remote commander and saves the

trouble of operating different AV components with different remote

control devices. The following are its main features.

Centralized control of Sony AV components with this one remote

commander

This Commander is preset at the factory to operate Sony brand

components, so you can use it out of the box as a control center for your

Sony AV components.

Remote control signals for non-Sony components are also preset

This Commander is preset for most major brands components as well as

Sony. You can remote control your non-Sony components by setting the

type and code number of each component (page 10).

Learning function for programming various other remote control

signals

This Commander has a Learning function, to “learn” the remote control

signals needed to operate other non-preset components or functions. (To

“teach” such signals to this Commander, use the remote control supplied

with the non-preset components.) (page 16)

In addition, the Commander can “learn” remote control signals (infrared

signals only) of non-Audio Visual components such as air-conditioners,

lights, etc. (Some specific appliances or functions may not be available.)

(page 24)

Reassigning new components

You can assign Component Select buttons to freely operate other

components. This is useful when you have more than two of the same

kind of AV component (only if a Component Select button is free.) (page

33)

You can only assign TVs to the TV Component Select button.

You can only assign an amplifier or DVD/Receiver combo to the AMP

Component Select button.

Startup Guide

This guide shows you how to set the Remote Commander to operate

your components.

First, find the four-digit component code number for your

component, referring to the supplied “Component code numbers.”

Example: To set up a TV of

the code number “8011”

1Set the Remote

Commander for code input

mode.

2Press the desired

Component Select button.

3Enter the code number.

4Finish setting.

SET

Press SET and MENU.

SET

SATDVDTV CBL

TAPE

CDVCR AMP

ENT

Press ENT.

You can search for the

component code available for

your component.

1Set the Remote

Commander for code

input mode.

2Press the desired

Component Select button.

3Transmit code number

signals in turn.

4Finish setting.

SET

Press SET and MENU.

SET

SATDVDTV CBL

TAPE

CDVCR AMP

POWER

ENT

Press ENT.

8 0 1 1

For more details, see page

Press CH + or CH –, and then

POWER. Repeat until your

component reacts.

If you have the code

number

If you cannot find the

code number

For more details, see page

1Place the RM-VL600 head to

head with your VCR’s

remote control.

2Set the RM-VL600 for

“learning” mode.

Press and hold SET for at least

3 seconds until the SET

indicator flashes.

3Press the desired

Component Select button.

If your component does not work as supposed even if the code

number is set, make the RM-VL600 “learn” the functions of

your component’s remote control.

Learning function

Example: To “teach” the N(play) signal of your video cassette

recorder to the VCR Nbutton of the RM-VL600

VCR’s remote

control

RM-VL600

SET

VCR

4Press the button you

want to “teach.”

5Press and hold the N

(play) button of your

VCR’s remote control until

the VCR button of the

RM-VL600 lights up.

6Repeat Steps 4and 5to

“teach” other functions.

7Finish setting.

For more details, see page 16.

2 – 4 inches

(5 – 10 cm)

away (approx.)

SET

Press SET.

Table of Contents

Getting Started

Installing the Batteries .................................................................................8

When to replace the batteries ............................................................................ 8

Location of Controls ..................................................................................... 9

Basic Operations

Setting the Code for non-Sony Preset Audio and Visual Components

— Setting component codes ...................................................................10

Setting a component code ................................................................................ 10

Checking if the code number works .............................................................. 12

Setting a Component Code by the Search Function ................................... 13

Operating Your Components with the Remote Commander ...................... 14

To control the volume ....................................................................................... 15

Programming Signals of Another Remote Control — Learning Function ... 16

For accurate Learning ....................................................................................... 19

Programming remote control signals to the

Component Select buttons and System Control buttons .......................... 20

Changing or erasing the function of a “learned” button ............................ 22

Notes on programming the signals for an air-conditioner ......................... 24

Advanced Features

Controlling the Volume of Visual Components Connected to an Audio

System ......................................................................................................25

Adding an Extra Function to the Component Select Buttons ..................... 27

Programming the Power-On Command of the Selected Component just

by pressing that Component Select button

(for Sony Components only) ........................................................................ 27

Executing a Series of Commands — System Control Functions ................. 29

To clear programmed commands ................................................................... 31

Programming a Series of Commands to on the Component Select

Buttons .....................................................................................................32

To clear programmed commands ................................................................... 33

Assigning Other Components to the Component Select Buttons .............. 33

Using Other Functions

Locking the Controls — Hold Function ....................................................... 34

Erasing all settings — To reset the Commander to its factory settings ..... 35

Additional Information

Precautions .................................................................................................36

Maintenance ...............................................................................................36

Specifications ..............................................................................................36

Troubleshooting .......................................................................................... 37

Appendixes

Table of Preset Functions ............................................................................ 39

TV (ANALOG) .................................................................................................. 39

TV (DIGITAL) .................................................................................................... 40

VCR ..................................................................................................................... 41

CBL (Cable box) ................................................................................................. 41

SAT ...................................................................................................................... 42

DVD .................................................................................................................... 42

DVR (Digital video recorder) .......................................................................... 43

CD ....................................................................................................................... 44

MD ....................................................................................................................... 44

DAT ..................................................................................................................... 45

DECK .................................................................................................................. 45

AMP .................................................................................................................... 45

Digital Cable Box .............................................................................................. 46

DAV (DVD/Receiver combo) ......................................................................... 46

Digital TV TUNER ............................................................................................ 47

Index ...........................................................................................................48

Getting Started

Installing the

Batteries

Slide open the battery

compartment lid and insert two

size AA (R6) batteries (not

supplied). Be sure to match up the

+ and – indications on the

batteries with the + and –

indications on the battery

compartment.

When to replace the

batteries

Batteries for remote control

operation (two size AA (R6)

batteries)

Under normal conditions, the

batteries will last up to six

months. If the Commander does

not operate properly, the batteries

might be drained. When this

happens, replace the batteries with

new ones.

Note

Do not take more than one hour to

replace the batteries. Otherwise, your

code number settings (page 10) and

“learned” remote control signals (page

16) will be erased.

Notes on batteries

•Do not use an old battery with a new

one, or mix different types of

batteries together.

•If the electrolyte inside the battery

should leak, wipe the contaminated

area of the battery compartment with

a cloth and replace the old batteries

with new ones. To prevent electrolyte

from leaking, remove the batteries if

you plan not to use the Commander

for a long period of time.

Insert the batteries (negative end

first) through the guide clamp

within each compartment as

shown above.

Location of Controls

1SET indicator

2SET button

3Component Select buttons

Light or flash during operation.

4Number buttons

5DIGITAL/ANALOG button

6VOL +/– buttons*

7INFO button

8MUTING button*

9GUIDE button

0EXIT button

qa Player Control buttons

qs TV/VIDEO button

qd POWER button

qf ENT (enter) button

qg TWIN VIEW button

qh CH (channel) +/– buttons

qj SLEEP button

qk RECALL button

ql MENU button

w; Cursor Control buttons

wa TOOLS button

ws SYSTEM CONTROL buttons

wd DOT button

SET POWER

SATDVDTV CBL

TAPE

CDVCR

VIDEO1

VIDEO2

AUX

TUNER

TAPE

PHONO

VOL CH

DVD

DIGITAL

/ANALOG

TWIN VIEW

SLEEP

INFO

GUIDE MENU

EXIT

TOOLS

SYSTEM CONTROL

RECALL

MUTING

AMP

ENT

ABCD

TV/VIDEO

About tactile dots

The number 5 button, the Bbutton and CH + button each have a tactile dot for ease

of use.

*Note on the VOL +/– and MUTING buttons

The Commander controls or mutes the TV’s volume when you select a visual

component. The Commander controls or mutes the amplifier’s volume when you

select an audio component. You can change this setting (page 25).

Note

The function of the control buttons varies depending on settings/operating modes.

The “Table of Preset Functions” (page 39) shows how the Commander generally

operates for each component in the factory preset mode.

SET POWER

SATDVDTV CBL

TA P E

CDVCR

VIDEO1

VIDEO2

AUX

TUNER

TAPE

PHONO

VOL CH

DVD

DIGITAL

/ANALOG

TWIN VIEW

SLEEP

INFO

GUIDE MENU

EXIT

TOOLS

SYSTEM CONTROL

RECALL

MUTING

AMP

ENT

ABCD

TV/VIDEO

2Press and while holding

SET, press MENU.

The SET indicator lights up.

Example: To set up a Philips’ TV

1See the tables in the

supplied “Component

Code Numbers,” and find

the four-digit component

code number for the

desired component.

If more than one code number

is listed, use the number that is

listed first.

For example, to set up a

Philips’ TV, you would use the

code number 8011.

Setting a component code

SET

Note

An MD player and a DAV can be set to

any of the above Component Select

buttons. You can assign Component

Select buttons to freely set signals of

your desired components. For further

information, see “Assigning Other

Components to the Component Select

Buttons” (page 33) .

For the functions of buttons as for each

component, see “Table of Preset

Functions” (page 39).

Basic Operations

Setting the Code for

non-Sony Preset

Audio and Visual

Components

— Setting

component codes

The Commander is preset at the

factory to operate Sony brand AV

components (see the table below).

If you are using the Commander

with a factory-set Sony

components, skip the following

procedures.

You can use the Commander with

other major brand preset AV

components also. To use with

other AV components, or Sony

components which do not

function with the Commander,

you need to follow the procedures

to set the correct codes for each

component.

Component

Select Button

DVD

SAT

CBL

VCR

TAPE

AMP

Factory setting

Sony TV

Sony DVD

player

Sony satellite

tuner

Analog cable

box

Sony VHS

VCR

Sony CD

player

Sony cassette

deck

Sony amplifier

Preset

component(s)

TV/VCR

Combo

DVD player

Satellite

tuner

Cable box

VCR

CD player

Cassette

deck

Amplifier

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Fernbedienung Handbücher

Sony

Sony RM-V210 - Universal Remote Bedienungsanleitung

Sony

Sony Remote Commander RM-VZ320 Bedienungsanleitung

Sony

Sony Live-View Remote RM-LVR1 Bedienungsanleitung

Sony

Sony Vaio VGP-BRMP10 Bedienungsanleitung

Sony

Sony RMT-TX210E Bedienungsanleitung

Sony

Sony RMF-TX100U Bedienungsanleitung

Sony

Sony RM-MC35ELK Bedienungsanleitung

Sony

Sony RM-XM10B Bedienungsanleitung

Sony

Sony Ipela RM-NS10 Bedienungsanleitung

Sony

Sony RM-X55M Marketing Bedienungsanleitung

Sony

Sony CECH-ZRC1U Bedienungsanleitung

Sony

Sony RM-X60M/L Bedienungsanleitung

Sony

Sony RM-AV2100T Bedienungsanleitung

Sony

Sony RMT-TX210E Bedienungsanleitung

Sony

Sony RM-KZ1 Operating Instructions and Manufacturers Code... Bedienungsanleitung

Sony

Sony RCP-920 Bedienungsanleitung

Sony

Sony RM-PP404 Bedienungsanleitung

Sony

Sony RM-NWS1 Bedienungsanleitung

Sony

Sony RM-B750 Bedienungsanleitung

Sony

Sony RMF-YD001 Bedienungsanleitung

Sony

Sony RM-95 Bedienungsanleitung

Sony

Sony RMF-TX621E Bedienungsanleitung

Sony

Sony RM-SC200 - S Link Remote Bedienungsanleitung

Sony

Sony RM-IP10 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung