Sony SCPH-10173 Bedienungsanleitung

3-069-287-32(1)

DVD Remote

Control

(for PlayStation®2) with

IR Receiver Unit

Instruction Manual

Thank you for purchasing the DVD Remote Control (for

PlayStation®2) with IR Receiver Unit. This DVD Remote

Control is exclusively for use with the PlayStation®2 computer

entertainment system.

SCPH-10173

Precautions

This product has been designed with the highest concern for safety.

However, any electrical device, if used improperly, has the potential for

causing fire, electrical shock or personal injury. To ensure accident-free

operation, be sure to follow these guidelines:

•Do not use the device if it functions in an abnormal manner.

•Keep the IR receiver unit (for PlayStation®2) in a place out of the reach of

small children. If swallowed, the IR receiver unit can cause choking.

• Never disassemble or modify the DVD Remote Control or IR receiver

unit.

•Keep the DVD Remote Control and IR receiver unit away from heat and

dust, and from smoky, greasy or humid locations.

•Do not leave the DVD Remote Control or IR receiver unit on the floor.

•Do not allow liquid or small particles to get into the DVD Remote

Control or IR receiver unit.

•Dispose of all packaging materials and worn-out products properly.

•If the device does not function properly, please contact the appropriate

PlayStation®customer service helpline which can be found within every

PlayStation®and PlayStation®2 format software manual.

Precautions .................................... 2

Discs that can be played with the

PlayStation®2 console .............. 4

Setup ...................... 5

Before use .......................................... 5

Notes on use ....................................... 5

Inserting batteries into the

DVD Remote Control

(for PlayStation®2) ....................... 6

Attaching the IR receiver unit

(for PlayStation®2) ....................... 7

Startup with the

supplied DVD Player

disc ........................ 8

Installing the DVD Player

on a Memory Card (8MB)

(for PlayStation®2) ....................... 8

Viewing a DVD

video .................... 10

Playback of a DVD video ................ 10

When the DVD video is

finished ....................................... 11

Operating the DVD Player ............... 11

About the Control Panel .................. 12

Using the DVD Remote Control

(for PlayStation®2) ..................... 16

Direct button operation with the

Analog Controller

(DUALSHOCK®2) ..................... 18

Playback from the last stopping

point (Resume Play) ................... 20

Playback in desired order

(Program Play) ........................... 21

Playback in random order

(Shuffle Play) .............................. 23

Repeated playback

(Repeat Play) .............................. 24

Repeated playback of a selected

section (AyB Repeat) ............. 25

Using the Control

Panel .................... 26

Selecting a specific scene for

playback ...................................... 27

Displaying title and chapter

numbers ...................................... 28

Finding a particular point on

a disc (Search) ............................ 29

Setup display item list ...................... 30

Troubleshooting ... 31

Specifications ...... 33

Table of contents

DVD video

The “DVD VIDEO” logo is a trademark.

Audio and video

12 cm 8 cm

About 4 hrs (single-sided) About 80 min (single-sided)

About 8 hrs (double-sided) About 160 min (double-sided)

Disc type

Disc logo

Contents

Disc size

Play time

Discs that can be played with the PlayStation

2 console

DVD video systems and regional restrictions

•This console conforms to the PAL broadcast standard. You cannot play

discs recorded for other broadcast standards (such as NTSC) on this

console (unless the NTSC disc displays the

ALL

label and an NTSC

compatible TV is used).

•Most DVD videos are marked with region numbers such as

. The

number contained within the symbol represents the region number of

DVD players on which the disc can be played. DVD videos that do not

bear this symbol, or that do not display the number 4, cannot be played on

your console.

•DVDs with the

ALL

label can also be played on this console. If you attempt

to play any other DVDs, a message stating, “This disc cannot be played

due to regional restrictions.” will appear onscreen.

•Some DVDs that have no region code markings may still be subject to

area restrictions and may not be playable on the console.

Note on the playback of DVD video

This console plays DVD video as originally designed by the software

producers. Some of the playback features of this console may not have

been incorporated into the DVD video design. As a result, some

playback features may not be available with certain software. Please

refer to the instructions supplied with your DVD video for details.

The following discs can be played on the PlayStation®2 console:

Setup

Before use

Check that you have the following items:

• DVD Remote Control (for PlayStation®2) (1)

•IR receiver unit (for PlayStation®2) (1)

•DVD Player (for PlayStation®2) disc (1)

•R03 (AAA) batteries (2)

•Instruction manual (1)

If any items are missing, please contact the appropriate PlayStation®

customer service helpline which can be found within every PlayStation®and

PlayStation®2 format software manual.

Notes on use

•Some PlayStation®2 or PlayStation®format software may not function

properly when operated using the DVD Remote Control (for

PlayStation®2).

•The DVD Remote Control will not work if you push more than one

button at a time.

• Two or more DVD Remote Controls or IR receiver units should not be

used simultaneously.

Setup (continued)

Inserting batteries into the DVD

Remote Control (for PlayStation®2)

Insert the two R03 (AAA) batteries (supplied) into the DVD Remote

Control paying attention to the plus and minus terminals (polarity) as

indicated in the battery compartment.

Notes

•Incorrect use of batteries can result in battery content leakage or explosion.

When using batteries, be sure to abide by the following instructions:

–Make sure that the plus and minus terminals of the batteries are inserted in the

correct directions.

– Do not mix old and new or different types of batteries.

– Do not attempt to recharge non-rechargeable type batteries.

– Remove the batteries when the DVD Remote Control will not be used for an

extended period of time.

– If battery contents have leaked, be sure to carefully remove all residue before

inserting new batteries.

• When using the DVD Remote Control, be sure that the IR receiver of the IR

receiver unit is not in direct sunlight or exposed to other strong light. The DVD

Remote Control may not function properly under such conditions.

Attaching the IR receiver unit

(for PlayStation®2)

Holding the IR receiver unit with the arrow mark facing up, securely insert

the connector into a controller port of the PlayStation®2 console.

Note

When using the IR receiver unit for the first time, be sure to remove the protective

scratch resistant film before inserting the unit into the PlayStation®2 console.

IR receiver unit

(for PlayStation®2)

IR receiver

Startup with the supplied DVD Player disc

To use all DVD Remote Control functions, you may need to install the DVD

Player (for PlayStation

2) on a Memory Card (8MB) (for PlayStation

(sold separately). For details, refer to the “Notes” section on page 9.

1Press the MAIN POWER switch on the PlayStation®2 console rear

to turn the console on.

The 1indicator turns red, and the console is in standby mode.

2Press the 1/RESET button.

The 1 indicator turns green, and the console startup screen is displayed.

3Press the A button.

The disc tray opens.

4Place the disc into the disc tray with the label side facing up.

5Press the A button.

The disc tray closes. Once the disc has started, the disc startup screen is

displayed.

Note

The DVD Player (for PlayStation®2) is software that allows playback of DVD

videos on the PlayStation®2 console.

Installing the DVD Player on a Memory

Card (8MB) (for PlayStation

The DVD Player must be installed on a Memory Card (8MB) (for

PlayStation®2) (sold separately). If you delete the DVD Player, you can

install it from the supplied disc again at any time.

1Insert the Memory Card (8MB) (for PlayStation®2) into MEMORY

CARD slot 1 of the PlayStation®2 console.

2Start the supplied DVD Player disc.

3On the startup screen, press the ✕button.

The Basic Operations screen is displayed.

4With the Basic Operations screen displayed, press the ✕button.

The Menu screen is displayed.

5Select the “Installing DVD Player” option from the Menu screen

and press the ✕button.

Complete the installation following the onscreen instructions.

Notes

•To view DVD video using the DVD Player installed on a Memory Card (8MB)

(for PlayStation®2), you must insert the Memory Card (8MB) (for

PlayStation®2) into a MEMORY CARD slot of the PlayStation®2 console.

•Some DVD Remote Control functions will not work if you use DVD Player

software earlier than version 2.00. Refer to the PlayStation®2 console

instruction manual for details on how to check the version of your DVD Player

software.

For PlayStation

2 consoles of model numbers SCPH-30002 and SCPH-35002

you must install DVD Player (ver 2.00), or later, on a Memory Card (8MB) (for

PlayStation

2) to activate all DVD Remote Control functions.

•Before installing the DVD Player on the Memory Card (8MB) (for

PlayStation®2), be sure that at least 2,200 KB (2.2MB) of free space is available

on the Memory Card.

•Insert the Memory Card (8MB) (for PlayStation®2) into MEMORY CARD

slot 1 of the PlayStation®2 console. Installation is not possible with the Memory

Card in MEMORY CARD slot 2.

•Do not remove the Memory Card (8MB) (for PlayStation®2) while the

installation is in progress. The installation will be incomplete if the Memory

Card is removed or the PlayStation®2 console is turned off or reset while

installing.

To view DVD video using the DVD Player installed on a Memory Card (8MB)

(for PlayStation

2), you must insert the Memory Card (8MB) (for PlayStation

into a MEMORY CARD slot of the PlayStation

2 console.

Some DVD Remote Control functions will not work if you use DVD Player

software earlier than version 2.00. Refer to the PlayStation

2 console instruction

manual for details on how to check the version of your DVD Player software.

For PlayStation

2 consoles of model numbers SCPH-30002 and SCPH-35002

you must install DVD Player (ver 2.00), or later, on a Memory Card (8MB) (for

PlayStation

2) to activate all DVD Remote Control functions.

For detailed installation instructions, see “Installing the DVD Player on a Memory

Card (8MB) (for PlayStation

2)” on pages 8-9.

Playback of a DVD video

1Insert the Memory Card (8MB) (for PlayStation®2) containing the

installed DVD Player into any MEMORY CARD slot of the

PlayStation®2 console.

2Press the MAIN POWER switch on the PlayStation®2 console rear

to turn the console on.

3Press the 1/RESET button.

4Press the Abutton.

5Insert the DVD video you would like to play into the disc tray

with the label side facing up.

6Press the Abutton.

The disc tray will close and playback will begin.

Notes

•Do not remove the Memory Card (8MB) (for PlayStation®2) containing the DVD

Player before playback of the DVD video begins.

•With some discs, playback will not begin immediately, but a Title menu or DVD

menu will be displayed.

•After the DVD video has finished playing, press the Abutton on the console to

eject the disc and display the browser screen.

• If the power is turned off during playback, any optional settings you have made

will be lost.

Viewing a DVD video

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Fernbedienung Handbücher

Sony

Sony RM-MC60 Bedienungsanleitung

Sony

Sony RM-V8A Bedienungsanleitung

Sony

Sony RM-V10A Primary Bedienungsanleitung

Sony

Sony RM-C950 Bedienungsanleitung

Sony

Sony RM-X11M Bedienungsanleitung

Sony

Sony RMF-TX621E Bedienungsanleitung

Sony

Sony RM-S1AM Bedienungsanleitung

Sony

Sony CECH-ZRC1U Bedienungsanleitung

Sony

Sony RCP-730 Bedienungsanleitung

Sony

Sony RCP-750 Bedienungsanleitung

Sony

Sony NW-HD5 Operating Instructions (English) Bedienungsanleitung

Sony

Sony SCPH-10420 U Bedienungsanleitung

Sony

Sony RM-IP500 Bedienungsanleitung

Sony

Sony RM-VL700 Bedienungsanleitung

Sony

Sony RM-V210T Bedienungsanleitung

Sony

Sony RM-V201 Bedienungsanleitung

Sony

Sony VCT-VPR1 Bedienungsanleitung

Sony

Sony rm-v8e Bedienungsanleitung

Sony

Sony RMT-P1BT Bedienungsanleitung

Sony

Sony RM-VL700S Administratorhandbuch

Sony

Sony RM-X14 Bedienungsanleitung

Sony

Sony RM-DR1 Bedienungsanleitung

Sony

Sony BRH10 Bedienungsanleitung

Sony

Sony XR-55A90J Betriebsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung