Sony SCPH-10174 Bedienungsanleitung
DVD Remote Control
(for PlayStation®2) with IR Receiver Unit
PlayStation®2
專用
DVD
遙控器
（內附紅外線接收系統）
DVD 리모컨 키트
(PlayStation
®
2 전용)
Instruction Manual
Thank you for purchasing the DVD remote control (for PlayStation®2) with IR
Receiver Unit. Before using this product, carefully read this manual and retain it
for future reference. This DVD remote control is exclusively for use with the
PlayStation®2 computer entertainment system.
使用說明書
感謝您購買 PlayStation®2 專用 DVD 遙控器（內附紅外線接收系統）。在使用本
產品以前，請先詳細閱讀本使用說明書，並妥善保存，以備將來參考之用。本遙控
器只對應 PlayStation®2 電腦娛樂系統。
사용 설명서
DVD 리모컨 키트(PlayStation®2 전용)를 구입해 주셔서 감사합니다.
본 DVD 리모컨은 PlayStation®2 컴퓨터 엔터테인먼트 시스템에만 사용할 수
있습니다. 본 제품을 사용하시기 전에 사용 설명서를 잘 읽어보시고, 나중에 참
조하실 수 있도록 잘 보관하십시오.
SCPH-10174
3-069-287-41(1)
2
Precautions
This product has been designed with the highest concern for safety.
However, any electrical device, if used improperly, has the potential for
causing fire, electrical shock or personal injury. To ensure accident-free
operation, be sure to follow these guidelines.
•Do not use the device if it functions in an abnormal manner.
•Keep the IR receiver unit (for PlayStation®2) in a place out of the reach of
small children. If swallowed, the IR receiver unit can cause choking.
•Never disassemble or modify the DVD remote control or IR receiver unit.
• Keep the DVD remote control and IR receiver unit away from heat and
dust, and from smoky, greasy or humid locations.
•Do not leave the DVD remote control or IR receiver unit on the floor.
•Do not allow liquid or small particles to get into the DVD remote control
or IR receiver unit.
•Dispose of all packaging materials and worn-out products properly.
•If the device does not function properly, contact the appropriate
PlayStation®customer service number in each country/area.
3
GB
GB
Precautions .................................... 2
Setup ...................... 4
Before use .......................................... 4
Notes on use ....................................... 4
Inserting batteries into the
DVD remote control
(for PlayStation®2) ....................... 5
Attaching the IR receiver unit
(for PlayStation®2) ....................... 6
Viewing a DVD
video ...................... 7
Playback of a DVD video .................. 7
When the DVD video is
finished ......................................... 8
Operating the DVD Player ................. 8
Operating with the Control Panel ...... 9
Operating with the DVD remote control
(for PlayStation®2) ..................... 13
Playback from the last stopping
point (Resume Play) ................... 15
Playback in desired order
(Program Play) ........................... 16
Playback in random order
(Shuffle Play) .............................. 18
Repeated playback
(Repeat Play) .............................. 19
Repeated playback of a selected
section (AyB Repeat) ............. 20
Using the Control
Panel .................... 21
Selecting a specific scene for
playback ...................................... 22
Displaying title and chapter
numbers ...................................... 23
Finding a particular point on
a disc (Search) ............................ 24
Troubleshooting ... 25
Specifications ...... 27
Table of contents
4
Setup
z
Before use
Please confirm that you have the following items:
•DVD remote control (for PlayStation®2) (1)
•IR receiver unit (for PlayStation®2) (1)
•Size AAA batteries (2)
•Instruction manual (1)
If any items are missing, please contact the appropriate PlayStation®
customer service number in each country/area.
z
Notes on use
•Some PlayStation®2 or PlayStation®format software may not function
properly when operated using the DVD remote control (for
PlayStation®2).
•The DVD remote control will not work if you push more than one button
at a time.
•Two or more DVD remote controls or IR receiver units should not be
used at the same time.
• Do not expose the DVD remote control or IR receiver unit to high
temperatures, high humidity or direct sunlight (use in an environment
where temperatures range 5°C - 35°C/41°F - 95°F).
• Do not put heavy objects on the DVD remote control or IR receiver unit.
•Do not throw or drop the DVD remote control or IR receiver unit, or
subject either item to strong physical shock.
•Do not touch the metal parts or insert foreign objects into the IR receiver
unit.
•When cleaning the DVD remote control or IR receiver unit, use a soft, dry
cloth. Do not use paint thinner, solvents or other chemicals.
•Static, non-moving images, such as DVD menus, configuration displays,
or images “paused” may leave a faint image permanently on the TV
screen if left on for extended periods of time. Projection TVs are more
susceptible to this than other types of displays. Do not operate the
PlayStation®2 console in such a manner that this could occur.
5
GB
•If you view DVD video with DVD Player (for PlayStation®2) earlier than
version 2.00, some functions of the DVD remote control will not be
available.
To confirm the version of your DVD Player, press the button in the
Main menu, and check the "DVD Player" field of the "Version
Information" screen.
For details, refer to the instruction manual for the PlayStation®2 console.
z
Inserting batteries into the DVD
remote control (for PlayStation®2)
Insert the two size AAA batteries (supplied) into the DVD remote control
paying attention to the plus and minus ends (polarity) as indicated in the
battery compartment.
Notes
• Incorrect use of batteries can result in battery content leakage or explosion. When
using batteries, be sure to abide by the following instructions:
– Make sure that the plus and minus ends of the batteries are inserted in the
correct directions.
– Do not mix old and new or different types of batteries.
– Do not attempt to recharge non-rechargeable type batteries.
– Remove the batteries when the DVD remote control will not be used for an
extended period of time.
– If battery contents have leaked, be sure to carefully remove all residue before
inserting new batteries.
•When using the DVD remote control, be sure that the IR receiver of the IR
receiver unit is not in direct sunlight or exposed to other strong light. The DVD
remote control may not function properly under such conditions.
6
z
Attaching the IR receiver unit
(for PlayStation®2)
Holding the IR receiver unit with the arrow mark facing up, securely insert
the connector into a controller port of the PlayStation®2 console.
Note
When using the IR receiver unit for the first time, be sure to remove the protective
scratch resistant film before inserting the unit into the PlayStation®2 console.
IR receiver unit
(for PlayStation®2)
IR receiver
Setup (continued)
7
GB
z
Playback of a DVD video
1Press the MAIN POWER switch on the PlayStation®2 console
rear to turn the console on.
2Press the 1(standby)/RESET button.
3Press the A(open) button.
4Insert the DVD video you would like to play into the disc tray
with the label side facing up (data side down).
5Press the Abutton.
The disc tray will close and playback will begin.
Notes
•With some discs, playback will not begin immediately, but a Title menu or DVD
menu will be displayed.
•After the DVD video has finished playing, press the Abutton on the console to
eject the disc and display the browser screen.
• If the power is turned off during playback, any optional settings you have made
will be lost.
Viewing a DVD video
8
Viewing a DVD video (continued)
Notes on the playback of DTS audio from a DVD video
DTS audio signal can only be output through an optical digital cable (sold
separately). Please note that it cannot be output through a regular audio
cable.
•Do not set the “DTS” option of “Audio Digital Out” under “Audio Setup”
to “On” when using an audio component that does not have a built-in
DTS decoder. In such cases, if you play a DTS audio track, a loud noise
(or no noise) will come from the speakers, possibly hurting your ears or
damaging the speakers.
•When the “DTS” option of “Audio Digital Out” under “Audio Setup” is
set to “Off”, the DVD’s DTS audio output will not be played back, even if
you connect with an optical digital cable.
z
When the DVD video is finished
1Press the A(open) button on the PlayStation®2 console.
2Remove the disc.
3Press the Abutton.
4Press and hold the 1(standby)/RESET button for about two
seconds.
Note: After changing DVD settings
To save your changes, be sure to eject the DVD before pressing the 1/RESET
button or turning off the console with the MAIN POWER switch. Please note that
changes will not be saved if you reset or turn off the console without first ejecting
the DVD.
z
Operating the DVD Player
The DVD Player can be operated in the following three ways:
• through the on-screen Control Panel
•directly with the DVD remote control
•directly with the analog controller (DUALSHOCK®2).
For details, refer to “Playing a DVD video” in the PlayStation®2 console
instruction manual.
9
GB
Notes
•Depending on the disc used, some operations may vary or may not be possible.
•The method of operation for certain functions may vary depending on whether the
IR receiver unit is inserted into the PlayStation®2 console or not.
z
Operating with the Control Panel
The Control Panel can be used to search for a specific scene, to playback
scenes in a different order, to change viewing angle, and so on.
The actual functions available may vary from disc to disc.
For more information on the Control Panel, see the detailed explanations in
the PlayStation®2 console instruction manual.
Direct item selection is also available.
A number of items can be directly selected using the buttons of the DVD
remote control. In this case, only the selected items will be displayed. For
more details, see “Using the DVD remote control (for PlayStation®2)” on
page 13.
123
456
78
0
9
R
3
ENTER
DVD/
PLAYSTATION
R
1
L
1
R
2
L
2
L
3
AUDIO
SHUFFLE
ANGLE
PROGRAM
SUBTITLE
REPEAT
CLEAR TIME
SCAN
SLOW
PREV A BNEXT
PLAY STOPPAUSE
TITLE
SELECT START
DVD MENU
RETURNDISPLAY
DISPLAY
button
Up, down,
right and left
directional
buttons
SELECT
button
ENTER
button
abutton
(cancel)
✕button
(enter)
10
2Use the directional buttons to move to the desired item.
3Press the ✕(enter) button.
Note
The ✕button and the ENTER button of the DVD remote control can all be used as
the ENTER button. For convenience, this manual will explain using the ✕button
only.
1Press the DISPLAY or SELECT button of the DVD remote
control.
The Control Panel is displayed on the screen.
Viewing a DVD video (continued)
Inhaltsverzeichnis
Sprachen:
Andere Sony Fernbedienung Handbücher
Sony
Sony RMF-TX621E Bedienungsanleitung
Sony
Sony NW-A1000 Bedienungsanleitung
Sony
Sony RM-V210 - Universal Remote Gebrauchs- und Wartungshandbuch
Sony
Sony RM-VL710 Administratorhandbuch
Sony
Sony MKS-8080 Bedienungsanleitung
Sony
Sony RM-X60M - Marine Remote Commander Bedienungsanleitung
Sony
Sony RM-AX1400 - Home Theater Remote Control Bedienungsanleitung
Sony
Sony BKS-R3219A Benutzerhandbuch
Sony
Sony KDL S3000 Series Gebrauchs- und Pflegehandbuch
Sony
Sony MKS-8080 Bedienungsanleitung
Sony
Sony RM-V11 Bedienungsanleitung
Sony
Sony RM-V502 Operating Instructions (primary... Bedienungsanleitung
Sony
Sony RM-V201T Bedienungsanleitung
Sony
Sony RMF-TX520E Bedienungsanleitung
Sony
Sony RM-KZ1 Bedienungsanleitung
Sony
Sony RM-AV2100T Bedienungsanleitung
Sony
Sony RM-PP404 Bedienungsanleitung
Sony
Sony RM-LP204M Bedienungsanleitung
Sony
Sony RM-V211T Bedienungsanleitung
Sony
Sony RM-Y130 Bedienungsanleitung
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
