Sony DCR-IP5 MovieShaker v3.1 Bedienungsanleitung

3-070-303-12(1)

MovieShaker

Ver.3.1 for MICROMV

Operating Instructions

Before using MovieShaker, be sure to read carefully

the END-USER LICENSE AGREEMENT (the Software

License Agreement) at the end of the Operating

Instructions.

is a trademark of Sony Corporation.

MovieShaker is a trademark of Sony Corporation.

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation

(USA) in the USA and in other countries.

QuickTime and the QuickTime logo are trademarks used under license (licence).

QuickTime is registered in the U.S. and other countries.

,, and MICROMV logo are trademarks of Sony Corporation.

Other system names and product names appearing in this document are generally

registered trademarks or trademarks of their manufacturers, although ™ and ®marks

are not shown in this document.

About the copyright:

Video or audio files recorded using this software should not be utilized (utilised) for any

purpose other than private pleasure unless prior permission from its rightful owner

under the Copyright Act is obtained.

About the screenshots used in this manual:

The screenshots used in this manual may be somewhat different than those you

actually see on your own computer; this is due to the different specifications of various

computers.

❒Copying all or part of the contents of this software and manual, or renting

the software without authorization are prohibited by copyright laws.

❒The Company cannot accept liability for damage or loss resulting from the

use of this software, or for any claim from a third party.

❒The Company assumes no responsibility aside from the replacement of the

media due to manufacturing fault.

❒This software must not be used in a system other than that specified.

❒The software specifications may be subject to change without notice.

❒The Company cannot be responsible for loss due to any inability to make

video or audio files recordings that may arise due to malfunctions of this

device or this software.

Continued

Table of Contents

Before Use

What you can do with MovieShaker ........................................................ 5

Precautions for Use ..................................................................................... 6

About the MICROMV .......................................................................... 6

Using MovieShaker .............................................................................. 7

How to Use this Manual ............................................................................ 9

How to Use this Help ................................................................................. 9

Installing the software .............................................................................. 11

To install MovieShaker ...................................................................... 11

To Install QuickTime 5....................................................................... 16

To Install DirectX 8.0a ........................................................................ 17

If you are running Windows 2000.................................................... 17

If you are running Windows Me ...................................................... 17

Basic Operation

Starting MovieShaker ............................................................................... 18

Workflow.................................................................................................... 19

Collecting clips .......................................................................................... 20

To capture multiple images (Batch Capture) ................................. 20

To capture an image while playing it back..................................... 23

To capture all images that have an index and arrange them

on the Product tray (Dubbing) ......................................................... 25

To make a shaken scene with collected clips.................................. 27

Placing clips to make a movie ................................................................. 29

To place a clip (on the Storyboard) .................................................. 29

To place a transition effect between scenes .................................... 31

Editing effects, etc. .................................................................................... 33

To select a scene for processing ........................................................ 33

To apply effects to a scene ................................................................. 35

To apply text effects to a scene ......................................................... 37

To change the volume or playback speed of a scene..................... 39

Exporting a final movie product ............................................................. 41

To preview a final movie product.................................................... 41

To export a final movie product ....................................................... 42

Additional information

Troubleshooting ........................................................................................ 45

END-USER LICENSE AGREEMENT..................................................... 46

Before Use

What you can do with MovieShaker

Movie making

You can capture images directly from the MICROMV device connected to

your computer with an i.LINK cable to make a final movie product.

Shake!

You can easily create a scene of approximately 30 seconds long including

BGM, by using clips on the Clip tray at random, simply by clicking a button.

A scene is automatically created and may have special effects in addition to

those on the Effect tray.

Effective scenes can easily be created using this tool.

To apply effects to a scene

You can apply effects provided with MovieShaker to a scene to make it more

visually interesting.

To place a transition effect between scenes

You can add an effect, such as a cross-fade or wipe effect, between scenes on

the Storyboard to provide an interesting transition from one scene to another.

To export a final movie product

You can export your final movie product to a file for distribution or viewing

by other people.

Precautions for Use

The hardware and software requirements for using MovieShaker are as

follows:

❐IBM PC/AT or compatible with the following capabilities.

– Minimum 600 MHz Pentium

III

®CPU (800 MHz or faster

recommended)

– Minimum 128 MB main memory (256 MB or more recommended)

– Minimum 100 MB available hard disk space (for Standard installation),

models having a speed of ATA66 or better (needed during capturing)

– Minimum 800 ·600 pixel or 1024 ·480 pixel Hi Color (Colour) (16-bit

color (colour)) display driver capability.

– Sound: Sound Blaster 16 compatible sound card

– Other: with i.LINK (IEEE1394) terminal

• We cannot guarantee that this product will operate correctly in all recommended

environments.

• Depending on a computer environment, this product may not operate correctly due

to insufficient memory when the main memory is 128 MB on the computer.

❐Operating System

Microsoft®Windows®2000 Professional (hereafter, Windows 2000),

Microsoft®Windows®MillenniumEdition (hereafter, Windows Me), or

Microsoft®Windows®XP Home/Professional

It is necessary for the above operating systems to have been installed at

the factory.

• We cannot be responsible for any later upgrades that may have been made in the

environment.

• Languages of the Operating Systems that can be used: Japanese, English, French,

German, Italian, Spanish, and Portuguese

About the MICROMV

• The MICROMV device can record and play back about 60 minutes of video

at the same high picture quality as the DV device (digital video

camcorder).

• All MICROMV cassettes are provided with Micro Cassette Memory. The

MICROMV device is provided with a function (called "Multi-picture

search") which allows you to use this Micro Cassette Memory to easily

access scenes you wish to view.

MovieShaker allows you to capture or process images efficiently using an

index contained on the Micro Cassette Memory.

• The data compression method used is MPEG2, the same used with BS

digital broadcasting.

Before Use

Using MovieShaker

• The following table lists the file formats compatible with the Clip tray.

Type Format Extension

Movie QuickTime Movie* .MOV

AVI (includes movie saved as DV) .AVI

MPEG1 .MPG,.MPEG

MPEG2 .MPG,.MPEG

MICROMV .MMV

Still image Windows Bitmap .BMP

GIF .GIF

JPEG .JPG

PNG .PNG

PICT .PCT,.PICT

Sound WAVE .WAV

AIFF .AIF

MP3 .MP3

* QuickTimeVR, QuickTime3D, and VECTOR files are not supported.

• To use MovieShaker, make sure to use the following display settings:

Screen area: 800 x 600 pixels or 1024 x 480 pixels or more

Color (Colour): High Color (Colour) (16 bits) or superior

• Do not change any screen setting in the Windows "Display Properties"

while running MovieShaker. You must exit MovieShaker before changing

the screen resolution, colors (colours), or Desktop Scheme.

• MovieShaker displays still images with an aspect ratio of 4:3. Still images

with any other aspect ratio will be trimmed (the upper left part) to adjust

the screen size to 4:3 aspect.

• If the movie is captured from a MICROMV device recorded in widescreen

mode (aspect ratio 16:9), its aspect ratio for display on the monitor is 4:3.

Note that, however, it is exported to a MICROMV device with an aspect

ratio of 16:9.

• When you open a project file in MovieShaker, or if you have saved the

interim contents of the Clip tray and Product tray as a project file, do not

move or delete the original files to which the clips on the Clip tray and the

scenes on the Product tray are referring.

Continued

•Exporting a final movie product to a file is time-consuming to complete.

Check the remaining battery charge before exporting. Use AC power

whenever possible. The "MICROMV" or "DV-AVI" option takes a

particularly long time.

Also, use AC power to export a final movie product to a MICROMV device

as this is also time-consuming.

•RealProducer 8.5 Basic is needed when exporting the product to a

RealVideo format file. If RealProducer 8.5 Basic is not installed on your

computer, you need to install it.

•Do not uninstall QuickTime.

•Do not put your computer into System Suspend mode or the System

Hibernation mode.

•Digital recording is not possible if the audio source is a CD disc.

•Running MovieShaker with the hard disk drive connected using an i.LINK

or USB cable may cause the software to malfunction. In this case, exit

MovieShaker and stop using the device, and then restart MovieShaker.

•Because large amounts of memory are needed to execute MovieShaker

commands, be sure to set the maximum and minimum sizes of virtual

memory to at least 1024 MB (for Windows 2000 and Windows XP

operating systems).

To capture from or export to MICROMV devices connected to your

computer

Depending on the computer settings, packet loss* may occur if a heavy load

is put on the CPU or hard disk while capturing images from or exporting

files to MICROMV devices. To reduce the occurrence of this problem, make

sure of the computer settings. For further information about the computer

settings, see "Configuring your computer for use with MICROMV devices

(Be sure to read this.)" of the on-line help.

When you capture images from or export files to MICROMV devices, see

"Limitations and notes for capturing from or exporting to MICROMV

devices" of the on-line help.

* Loss of data transferring between your computer and a MICROMV device due to a heavy

load put on the system that may cause distorted images.

Before Use

How to Use this Manual

This manual describes how to use MovieShaker, from capturing images from

a MICROMV device to creating a movie. You can learn basic functions of

MovieShaker following the manual.

This manual describes only the basic operations of MovieShaker. More

detailed operations are described in MovieShaker on-line help. Please see

"How to Use this Help" for instructions on how to use MovieShaker on-line

help.

How to Use this Help

MovieShaker on-line help provides more detailed information than this

manual. You not only can find descriptions from predetermined keywords

but also you can type in any words you like to search for explanations.

Displaying the Help Contents

MovieShaker on-line help is displayed by clicking "How to Use

MovieShaker" in the "Help" menu.

•The left side area of Help where "Contents," "Index," and "Search" are

displayed is called the left frame.

•Select "Contents" or "Index" to switch displays. Continued

The right side area of Help, where explanations are displayed, is called the

right frame.

•When you click underlined text in the explanation, you can see an

explanation of the underlined text.

To search by contents

When you select "Contents" in the left frame, a table of contents appears.

When you click or double-click an item in the table of contents, the

explanation of that item appears in the right frame.

To search by predetermined keywords

When you select "Index" in the left frame, a list of keywords appears.

Enter a few characters from the beginning of the word you want to find, or

select a keyword from the list and click "Display" to see the explanation of the

keyword.

To search with your own words:

Select "Search" in the left frame.

1Enter the word you want in "Type in the keyword to find:," then

click "List Topics."

A list of items which contain the word you entered appears in the left

frame.

2Select an item from the list, and click "Display."

An explanation appears in the right frame. In the explanation, the word

you entered in step 1 is highlighted.

zHint

If you use an * (asterisk) such as "MPE*," you can list items which start with MPE.

Andere Handbücher für DCR-IP5 MovieShaker v3.1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Software Handbücher

Sony

Sony CPF-IX001 - Wireless PC-Linked Audio System Bedienungsanleitung

Sony

Sony PlayStation 3 (Uncharted: Drake's Fortune Limited Edition... Bedienungsanleitung

Sony

Sony HDR-SR5/C Leitfaden

Sony

Sony PCLink Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Sony

Sony Pro 10 Bedienungsanleitung

Sony

Sony MZ-N1 Bedienungsanleitung

Sony

Sony SRW5800/2 Bedienungsanleitung

Sony

Sony DCR-TRV260 - Digital Handycam Camcorder Benutzerhandbuch

Sony

Sony CLIE PEG-UX40 Bedienungsanleitung

Sony

Sony MZ-S1 SonicStage v1.5 Bedienungsanleitung

Sony

Sony F35 Cinealta Bedienungsanleitung

Sony

Sony CLIE PEGA-SA500 Bedienungsanleitung

Sony

Sony PEG-N610C MS Import/MS Export Bedienungsanleitung

Sony

Sony ERS-311 AIBO Life Bedienungsanleitung

Sony

Sony SonicStage Simple Burner Bedienungsanleitung

Sony

Sony ICDBM1 - Memory Stick Media Digital Voice... Bedienungsanleitung

Sony

Sony Emma Bedienungsanleitung

Sony

Sony ERS-311 AIBO Life Bedienungsanleitung

Sony

Sony DVP-NW50 - In-wall Dvd Player Bedienungsanleitung

Sony

Sony VGN-TX850P Handbuch

Sony

Sony VAIO VGN-CR440F Handbuch

Sony

Sony LocationFree LF-B10 Bedienungsanleitung

Sony

Sony PEG-N610C Memory Stick Autorun v1.3 Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung