Sony HT-CT370 Bedienungsanleitung

HT-CT370/CT770

4-488-970-61(1)

1AR

Operating Instructions GB

  AR

HT-CT370/CT770

Sound Bar

2GB

Do not install the appliance in a confined space, such as a bookcase or

built-in cabinet.

To reduce the risk of fire, do not cover the ventilation opening of the

appliance with newspapers, tablecloths, curtains, etc.

Do not expose the appliance to naked flame sources (for example,

lighted candles).

To reduce the risk of fire or electric shock, do not expose this appliance

to dripping or splashing, and do not place objects filled with liquids, such

as vases, on the appliance.

The unit is not disconnected from the mains as long as it is connected to

the AC outlet, even if the unit itself has been turned off.

As the main plug is used to disconnect the unit from the mains, connect

the unit to an easily accessible AC outlet. Should you notice an

abnormality in the unit, disconnect the main plug from the AC outlet

immediately.

Do not expose batteries or appliances with battery-installed to excessive

heat, such as sunshine and fire.

Indoor use only.

For the Bar Speaker

The nameplate is located on the bottom.

Recommended cables

Properly shielded and grounded cables and connectors must be

used for connection to host computers and/or peripherals.

WARNING

3GB

Useful functions

Installing the Bar Speaker on a wall ..................................... 4

Using the Control for HDMI function .................................... 6

Using “BRAVIA” Sync features ...............................................7

Controlling the system using a smartphone or tablet device

(SongPal) .......................................................................... 8

Adjusting the settings ..........................................................10

Linking the system (LINK) ..................................................... 12

Miscellaneous

Precautions ........................................................................... 13

BLUETOOTH wireless technology ........................................ 15

Troubleshooting ...................................................................16

Parts and controls ................................................................19

Specifications .......................................................................25

Refer to the supplied Startup Guide for setup and basic

operations.

Table of contents

4GB

Installing the Bar Speaker on a wall

You can install the Bar Speaker on a wall.

Prepare screws (not supplied) that are suitable for the wall material and

strength. As a plasterboard wall is especially fragile, attach the screws

securely to two studs in the wall beam. Install the Bar Speaker

horizontally, hung by screws in studs in a continuous flat section of the

wall.

Be sure to subcontract the installation to Sony dealers or licensed

contractors and pay special attention to safety during the installation.

Sony shall not be held responsible for accidents or damage caused by

improper installation, insufficient wall strength, improper screw

installation or natural calamity, etc.

1Fix the supplied wall mounting brackets to the bracket fixing

holes on the bottom of the Bar Speaker with the supplied

screws so that the surface of each wall mounting bracket is as

shown in the illustration.

Fix the two wall mounting brackets to the left and right fixing

holes on the bottom of the Bar Speaker.

Useful functions

Notes

Screw (supplied)

Wall mounting bracket (supplied)

AC power cord (mains lead)

5GB

Useful functions

2Prepare screws (not supplied) that are suitable for the holes

on the back of the wall mounting brackets.

3Fasten the screws to two studs in the wall.

The screws should protrude 6 to 7 mm.

4Hang the wall mounting brackets fixed on the Bar Speaker on

the screws.

Align the holes in the wall mounting brackets with the screws,

then hang the Bar Speaker on the two screws.

Tip

The Bar Speaker automatically detects whether it is mounted on a wall or

positioned flat, and it optimizes the sound for its orientation.

Hole on the wall mounting bracket

4mm

More than 25 mm

4.4 mm

9.8 mm

6 to 7 mm

HT-CT370: 652 mm

HT-CT770: 605 mm

6GB

Using the Control for HDMI function

By using the Control for HDMI function, and connecting equipment

that is compatible with the Control for HDMI function via a High

Speed HDMI cable, operation is simplified with the features below.

The Control for HDMI function is enabled by setting “CTRL (Control

for HDMI)” to “ON” (page 11). The default setting is “ON.”

When you turn off the TV, the system and the connected equipment

will turn off automatically.

If you turn on the system while you are watching the TV, the TV

sound will be output from the speakers of the system automatically.

The volume of the system will be adjusted when you adjust the

volume using the TV’s remote control.

If the TV sound was output from the speakers of the system the last

time you watched the TV, the system will be turned on automatically

when you turn on the TV again.

If the TV is compatible with the Audio Return Channel (ARC)

technology, a High Speed HDMI cable connection will also allow

sending digital audio signals from the TV to the system. You do not

need to make a separate audio connection for listening to TV sound

from the system.

The ARC function is enabled by setting “ARC (Audio return channel)”

to “ON” (page 11). The default setting is “ON.”

When you activate the equipment (Blu-ray Disc™ player,

“PlayStation®4,” etc.) connected to the system with a High Speed

HDMI cable, the connected TV is turned on automatically and the

input signal of the system is switched to the appropriate HDMI input.

The above features may not operate with certain equipment.

Depending on the settings of the connected equipment, the Control for

HDMI function may not work correctly. Refer to the operating

instructions of the equipment.

System Power Off

System Audio Control

Audio Return Channel (ARC)

One-Touch Play

Notes

7GB

Useful functions

Using “BRAVIA” Sync features

The original Sony functions listed below can also be used with

products that are compatible with “BRAVIA” Sync.

If a “BRAVIA” Sync-compatible TV is connected to the system, the

power consumption will be reduced in standby mode by stopping

HDMI signal transmission when the TV is turned off with the pass-

through function* of the system set to “AUTO” (page 11).

The default setting is “AUTO.”

If any TV other than “BRAVIA” is connected, set the item to “ON”

(page 11).

* The pass-through function for HDMI signals is used to output the

signals from the HDMI OUT jack of this system even if it is in standby

mode.

Use a High Speed HDMI cable. If you use a Standard HDMI cable,

1080p, Deep Color, 3D, and 4K images may not be displayed

properly.

Use an HDMI-authorized cable.

Use a Sony High Speed HDMI cable with the Cable Type Logo.

We do not recommend using an HDMI-DVI conversion cable.

Check the setup of the connected equipment if an image is poor or

the sound does not come out of the equipment connected via the

HDMI cable.

Audio signals (sampling frequency, bit length, etc.) transmitted

from an HDMI jack may be suppressed by the connected

equipment.

Sound may be interrupted when the sampling frequency or the

number of channels of audio output signals from the playback

equipment is switched.

If the connected equipment is not compatible with copyright-

protection technology (HDCP), the image and/or the sound from

the HDMI OUT jack of this system may be distorted or may not be

output. In such a case, check the specifications of the connected

equipment.

When “TV” is selected as the input source of the system, video

signals via one of the HDMI IN 1/2/3 jacks selected last time are

output from the HDMI OUT jack.

This system supports Deep Color, “x.v.Colour,” 3D, and 4K

transmission.

To enjoy 3D images, connect a 3D-compatible TV and video

equipment (Blu-ray Disc player, “PlayStation®4,” etc.) to the system

using High Speed HDMI cables, put on 3D glasses, and then play

back a 3D-compatible Blu-ray Disc, etc.

To enjoy 4K images, the TV and players that are connected to the

system must be compatible with 4K images.

Power save

Notes on HDMI connections

8GB

Controlling the system using a smartphone

or tablet device (SongPal)

“SongPal” is the application to operate the system with your

smartphone or tablet, etc.

“SongPal” is available from either Google Play™ or App Store.

This function is enabled by setting “BT PWR (BLUETOOTH power)” to

“ON” (page 11). The default setting is “ON.”

1Press the  (on/standby) button on the remote control.

The display of the Bar Speaker lights.

2Search for “SongPal” with the Android device and download

that application.

3Run “SongPal” then follow the on-screen instructions.

4After the BLUETOOTH connection display appears on the

Android device, press the PAIRING button on the remote

control.

The lamp (blue) flashes quickly during BLUETOOTH pairing.

5Select “SONY:HT-CT370” or “SONY:HT-CT770” from the

BLUETOOTH device list of the Android device.

When the connection has been established, the lamp (blue) of

the Bar Speaker lights.

6Operate the system with the display of the connected

Android device.



PAIRING

When using an Android™ device

9GB

Useful functions

One-Touch connection using the Android device with the

NFC function built-in (NFC)

1Perform steps 1 to 3 of “When using an Android device.”

2After the BLUETOOTH connection display appears on the

Android device, touch the Android device with the N mark of

the Bar Speaker.

When the connection has been established, the lamp (blue) of

the Bar Speaker lights.

3Operate the system with the display of the Android device.

1Press the  (on/standby) button on the remote control.

The display of the Bar Speaker lights.

2Press the PAIRING button on the remote control.

The lamp (blue) of the Bar Speaker flashes quickly during

BLUETOOTH pairing.

3Set the iPhone/iPod touch to pairing mode and select

“SONY:HT-CT370” or “SONY:HT-CT770” from the BLUETOOTH

device list on the iPhone/iPod touch.

When the connection has been established, the lamp (blue) of

the Bar Speaker lights.

4Search for “SongPal” with the connected iPhone/iPod touch

and download that application.

5Run “SongPal” then operate the system with the display of

the iPhone/iPod touch.

Lamp (blue)

When using an iPhone/iPod touch

10GB

Adjusting the settings

You can set the following items with the AMP MENU button on the remote control.

Your settings are retained even if you disconnect the AC power cord (mains lead).

1Press the AMP MENU button on the remote control to display the amplifier menu window on the display of

the Bar Speaker.

2Select the desired setting, using the (return)/(select)/(proceed) button, and press the (enter)

button.

3Press the AMP MENU button to exit the amplifier menu window.

Menu Function Default

LEVEL DRC

(Dynamic range control)

You can enjoy Dolby Digital sound at low sound volumes. (ON/

AUTO/OFF)

ON: Compresses sound in accordance with the compression

information contained in the content.

AUTO: Automatically compresses sound encoded in Dolby TrueHD.

OFF: Sound is not compressed.

AUTO

TONE BASS Low sound is emphasized. The setting can be changed from –6 to

+6 in units of 1. 0

TREBLE High sound is emphasized. The setting can be changed from –6 to

+6 in units of 1. 0

AUDIO SYNC

(AV sync)

You can adjust the sound when the image and the sound are not

in sync. (ON/OFF) OFF

DUAL

(Dual mono)

You can enjoy multiplex broadcast sound of Dolby Digital audio.

(M/S (main and sub channels)/MAIN (main channel)/SUB (sub

channel))

MAIN

AAV

(Advanced auto volume)

Reduces the volume discrepancies between different programs or

between programs and commercials. (ON/OFF) OFF

EFFECT

(Sound effect)

ON: The sound of the selected sound field is played. It is

recommended to use this setting.

OFF: The input source is down-mixed for 2 channels.

Note: When “EFFECT (Sound effect)” is set to “OFF,” “EFFECT (Sound

effect)” is automatically set to “ON” when you change the

SOUND FIELD setting.

AMP MENU

(return)/

(select)/

(proceed)/

(enter)

Andere Handbücher für HT-CT370

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Sony Lautsprechersystem Handbücher

Sony

Sony HT-CT770 Bedienungsanleitung

Sony

Sony SS-CN195 Bedienungsanleitung

Sony

Sony SA-VE345 Installationsanleitung

Sony

Sony SRSBT100 - Bluetooth Stereo Speakers Bedienungsanleitung

Sony

Sony HT-NT3 Benutzerhandbuch

Sony

Sony SRS-T77 - Travel Speakers With Worldwide Voltage AC... Bedienungsanleitung

Sony

Sony HT-S2000 Bedienungsanleitung

Sony

Sony SRS-RF80RK Bedienungsanleitung

Sony

Sony SS-X5S Bedienungsanleitung

Sony

Sony SRS-PC51 Bedienungsanleitung

Sony

Sony SDP-EP70 Bedienungsanleitung

Sony

Sony SDDS Print Master Bedienungsanleitung

Sony

Sony Muteki LBT-LCD7Di Bedienungsanleitung

Sony

Sony SRS-P7 - Portable Speakers Bedienungsanleitung

Sony

Sony HTX-8500CEK Bedienungsanleitung

Sony

Sony SA-IF70 Bedienungsanleitung

Sony

Sony SRS-T57 Bedienungsanleitung

Sony

Sony HT-ST9 Bedienungsanleitung

Sony

Sony SRS-AX10 Bedienungsanleitung

Sony

Sony SS-MF600H Bedienungsanleitung

Sony

Sony SRS-PC37 Bedienungsanleitung

Sony

Sony SRS-BT100IK Bedienungsanleitung

Sony

Sony HT-CT380 Bedienungsanleitung

Sony

Sony HT-A7000 Benutzerhandbuch

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung