Sony RHT-G1000 - Home Theater Built-in Sound Rack... Bedienungsanleitung

THEATRE STAND SYSTEM

US Model

Canadian Model

AEP Model

UK Model

Korea Model

SPECIFICATIONS

RHT-G1000

Ver. 1.2 2006.07

9-887-061-03

2006G02-1

Sony Corporation

Home Audio Division

Published by Sony Techno Create Corporation

SERVICE MANUAL

Amplifier section

Stereo mode 40 W + 40 W (4 ohms at 1 kHz, DIN)

Surround mode (reference) power output

Front: 100 W + 100 W

(4 ohms at 1 kHz, THD 10 %)

Surround*: 100 W + 100 W

(4 ohms at 1 kHz, THD 10 %)

Subwoofer*: 200 W

(2 ohms at 1 kHz, THD 10 %)

Depending on the sound field settings and the source, there may

be no sound output.

Inputs (Analog)

TV, SAT, DVD, VIDEO Sensitivity: 610 mV

Impedance: 25 kilohms

Inputs (Digital)

TV, SAT, DVD, VIDEO Impedance: 75 ohms

Tuner section

System PLL quartz-locked digital synthesizer

system

FM tuner section

Tuning range 87.5 – 108.0 MHz (50 kHz step)

Antenna (aerial) FM wire antenna (aerial)

Antenna (aerial) terminals 75 ohms, unbalanced

Intermediate frequency 10.7 MHz

AM tuner section

Tuning range European model:

531 – 1,602 kHz (with the interval set

at 9 kHz)

This system incorporates Dolby*Digital and Pro Logic Surround and

the DTS** Digital Surround System.

*Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

** “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems,

Inc.

– Continued on next page –

Other models:

530 – 1,710 kHz (with the interval set

at 10 kHz)

531 – 1,602 kHz (with the interval set

at 9 kHz)

Antenna (aerial) AM loop antenna (aerial)

Intermediate frequency 450 kHz

Video section

Inputs/Outputs Video: 1 Vp-p 75 ohms

COMPONENT:

Y: 1 Vp-p 75 ohms

PB/CB, PR/CR: 0.7 Vp-p

75 ohms

Accepts 480i/480p/720p/1080i

Speakers

Front

Speaker system Bass reflex, magnetically shielded

Speaker unit 65 mm cone type

Surround

Speaker system Bass reflex, magnetically shielded

Speaker unit 65 mm cone type ×2

Subwoofer

Speaker system Bass reflex, magnetically shielded

Speaker unit 160 mm cone type ×2

RHT-G1000

UNLEADED SOLDER

Boards requiring use of unleaded solder are printed with the lead-

free mark (LF) indicating the solder contains no lead.

(Caution: Some printed circuit boards may not come printed with

the lead free mark due to their particular size.)

: LEAD FREE MARK

Unleaded solder has the following characteristics.

•Unleaded solder melts at a temperature about 40°C higher than

ordinary solder.

Ordinary soldering irons can be used but the iron tip has to be

applied to the solder joint for a slightly longer time.

Soldering irons using a temperature regulator should be set to

about 350°C.

Caution: The printed pattern (copper foil) may peel away if

the heated tip is applied for too long, so be careful!

•Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow)

than ordinary solder so use caution not to let solder bridges

occur such as on IC pins, etc.

•Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may

also be added to ordinary solder.

Notes on chip component replacement

•Never reuse a disconnected chip component.

•Notice that the minus side of a tantalum capacitor may be

damaged by heat.

General

Power requirements European model:

230 - 240 V AC, 50/60 Hz

US,Canadian model:

120 V AC, 60 Hz

Other models:

220 - 240 V AC, 50/60 Hz

Power consumption On: 125 W

Standby: 0.3 W

Dimensions (approx.) 1,205 ×495 ×550 mm

(w/h/d) incl. projecting parts

Mass (approx.) 64 kg

Supplied accessories AM loop antenna (aerial) (1)

FM wire antenna (aerial) (1)

Optical cable (1)

Component video cord

(blue/green/red) (1)

Video cord (yellow) (1)

Remote commander (remote) (1)

R6 (size AA) batteries (2)

Operating Instructions (1)

Quick Setup Gui (card) (1)

Dimensions:

A1,205

B510

C495

Weight: kg 64

Ver. 1.2

Design and specifications are subject to change without notice.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK 0OR DOTTED LINE

WITH MARK 0ON THE SCHEMATIC DIAGRAMS AND IN THE

PARTS LIST ARE CRITICAL TO SAFE OPERATION. RE-

PLACE THESE COMPONENTS WITH SONY PARTS WHOSE

PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR

IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!!

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0SUR LES

DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT

CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE

REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY

DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU

DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.

RHT-G1000

TABLE OF CONTENTS

1. GENERAL ................................................................... 4

2. DISASSEMBLY

2-1. AMP Assy ........................................................................ 6

3. TEST MODE ............................................................... 7

4. DIAGRAMS ................................................................. 8

4-1. Block Diagram – Video Section – .................................. 9

– DSP Section – ............................................................... 10

– Audio Section – ............................................................ 11

– Power Section – ............................................................ 12

4-2. Printed Wiring Board – MAIN Board (Side A) – ........... 13

4-3. Printed Wiring Board – MAIN Board (Side B) – ........... 14

4-4. Schematic Diagram – MAIN Board (1/8) – ................... 15

4-5. Schematic Diagram – MAIN Board (2/8) – ................... 16

4-6. Schematic Diagram – MAIN Board (3/8) – ................... 17

4-7. Schematic Diagram – MAIN Board (4/8) – ................... 18

4-8. Schematic Diagram – MAIN Board (5/8) – ................... 19

4-9. Schematic Diagram – MAIN Board (6/8) – ................... 20

4-10. Schematic Diagram – MAIN Board (7/8) – ................... 21

4-11. Schematic Diagram – MAIN Board (8/8) – ................... 22

4-12. Printed Wiring Board – IO Board (Side A) – ................. 23

4-13. Printed Wiring Board – IO Board (Side B) – ................. 24

4-14. Schematic Diagram – IO Board (1/2) –.......................... 25

4-15. Schematic Diagram – IO Board (2/2) –.......................... 26

4-16. Printed Wiring Board – ACIN Board , AC2 Board

(US,CND) – ... 26

4-17. Schematic Diagram – ACIN Board , AC2 Board

(US,CND) – ... 26

4-18. Printed Wiring Board – PANEL, CNV Board (Side A) – 27

4-19. Printed Wiring Board – PANEL, CNV Board (Side B) – 28

4-20. Schematic Diagram – PANEL, CNV Board – ................ 29

4-21. Printed Wiring Board – SPOUT Board – ....................... 30

4-22. Schematic Diagram – SPOUT Board – .......................... 30

5. EXPLODED VIEWS

5-1. Grille Frame Section ....................................................... 43

5-2. Panel Section ................................................................... 44

5-3. Speaker Section ............................................................... 45

5-4. Amp Section-1 ................................................................. 46

5-5. Amp Section-2 ................................................................. 47

Ver. 1.2

RHT-G1000

SECTION 1

GENERAL

This section is extracted from

instruction manual.

LOCATING THE CONTROLS

Front panel

AFront panel display (28)

BSound field indicator (17)

CVOLUME +/– (23)

DINPUT SELECTOR (23)

E(remote sensor) (23)

F"/1(on/standby) (23)

?/1

6 4 35

Front panel display

About the indications in the front panel display

ACurrent surround format

BLights up in SLEEP mode. (21)

CLights up when A/V SYNC is

functioning. (16)

DLights up when a radio station is tuned.

(19)

ELights up when a stereo broadcast is

tuned. (19)

FLights up when listening to the radio in

monaural effect. (20)

TUNED ST MONO

SLEEP

A/V SYNC

RHT-G1000

Rear panel

ATV/VIDEO/DVD/SAT jacks

BCOMPONENT jacks

CAM terminal

DCOAXIAL FM 75Ωjack

ANTENNA

COMPONENT

SAT

VIDEO IN

AUDIO IN

VIDEO IN COAXIAL IN

OPTICAL IN

DVD

AUDIO IN

VIDEO IN COAXIAL IN

OPTICAL IN

VIDEO

AUDIO IN

VIDEO IN COAXIAL IN

OPTICAL IN

AUDIO IN

OPTICAL IN

VIDEO OUT

DVD IN

SAT IN

TV OUT

COAXIAL

Remote control

Here describes the buttons for amplifier

operation only. See page 11 for the buttons for

operation of the connected components.

A"/1(on/standby)

BInput buttons

CAMP MENU (14, 15, 16, 17)

DTUNER MENU (19)

EPRESET +/– (19)

FMUTING

GVOLUME +/– (19)

The VOLUME + button has a tactile dot.*

HDISPLAY (19)

IC/X/x/c/ENTER (14, 15, 16, 17, 19)

JTUNING +/– (19)

KSOUND FIELD +/– (17)

*Usethetactile dot as a reference when operating the

system.

Mm.

VIDEO TV DVD

RM SETUP

SYSTEM STANDBY

TV ?/1 AV ?/1

SOUND FIELD TUNER/BAND

CH SLEEP AMP MENU

SAT

TOP MENU/

GUIDE AV MENU

MUTING

VOLUME

RETURN/EXIT

TV VOL TV CH ANT

JUMP

TV/

VIDEO

WIDE

DISPLAY

TUNING +

PRESET +

12/SET>10/110/10

ENTERCLEAR

FM MODE

ANGLE

AUDIO

TUNER MENU

SUBTITLE

?/1

RHT-G1000

SECTION 2

DISASSEMBLY

2-1. AMP ASSY

Note: Follow the disassembly procedure in the numerical order given.

two shafts (lock)

two rivets

AMP assy

RHT-G1000

1. Starting Test Mode

•Please start the test mode by the following procedure when

you execute “Volume Test’’ or “Panel Test’’.

Procedure:

1. Press the `/1 button to turn the power on.

2. Press two buttons of INPUT SELECTOR and VOLUME +

at the same time for five seconds.

3. After “TEST MENU” displays it, “COMMON” is blinking.

2. Cold Reset

•The cold reset clears all data including preset data stored in

the RAM to initial conditions. Execute this mode when

returning the set to the customers.

Procedure:

1. Press the `/1 button to turn the power on.

2. Press three buttons of `/1 , INPUT SELECTOR and

VOLUME – simultaneously.

3. When this button is operated, display as “COLD RESET” for

a while and all of the settings are reset.

3. Volume Test

Procedure:

1. Enter the test mode.

2. Press the INPUT SELECTOR button, and “DVD” is

displayed.

3. Press the VOLUME – button, and “VOLUME MIN” is

displayed for second times.

4. Press the VOLUME + button, and “VOLUME MAX” is

displayed for second times.

5. When the `/1 button is pressed twice, the test mode is

released. At that time, cold reset is done as for the set.

4. Panel Test

•This mode is used to check the display, key and software

version.

4-1. Display Check

Procedure:

1. Enter the test mode.

2. Press the VOLUME + button, and “PANEL” is blinking.

3. Press the INPUT SELECTOR button, and all segments turn

on.

4-2. Key Test

Procedure:

1. Press the VOLUME – button with all segment lit, and “K0”

is displayed.

2. It is displayed every time one of four kinds of buttons ( `/1 ,

INPUT SELECTOR , VOLUME – and VOLUME + ) is

pressed as “K1”, “K2”, “K3”, and “K4”.

3. To exit this mode, press the `/1 button.

4-3. Version Check

Procedure:

1. Press the VOLUME + button with all segment lit, and

“RACK” is displayed.

2. Whenever VOLUME + button is pressed, the category is

displayed in the way below.

tRACK tCE2 tMC tSYS tUI tST tTA tTM

3. When the INPUT SELECTOR button is pressed when each

category is displayed, the version of the category is displayed.

4. To exit this mode, press the `/1 button.

SECTION 3

TEST MODE

RHT-G1000

SECTION 4

DIAGRAMS

Note on Printed Wiring Boards.

•X: parts extracted from the component side

•Y: parts extracted from the conductor side

•a: Through hole

•: Pattern from the side which enables seeing

(The other layers' patterns are not indicated.)

•Note for Printed Wiring Boards and Schematic Diagrams

Note on Schematic Diagrams.

•All capacitors are in µF unless otherwise noted. (p: pF)

50 WV or less are not indicated except for electrolytics

and tantalums.

•All resistors are in Ωand 1/4W or less unless otherwise

specified.

•%: indicates tolerance.

• f: internal tolerance.

•2: nonflammable resistor.

•C: panel designation.

Caution:

Pattern face side: Parts on the pattern face side seen from

(Side B) the pattern face are indicated.

Parts face side: Parts on the parts face side seen from

(Side A) the parts face are indicated.

•A: B+ Line.

•B: B– Line.

•Voltages and waveforms are dc with respect to ground under no-

signal conditions.

no mark : DVD

( ) : FM

•Voltages are taken with a VOM (Input impedance 10 MΩ).

Voltage variations may be noted due to normal production toler-

ances.

•Waveforms are taken with a oscilloscope.

Voltage variations may be noted due to normal production toler-

ances.

•Circled numbers refer to waveforms.

•Signal path.

F: AUDIO

d: TUNER

f: DIGITAL IN

E: Y

r: COMPONENT VIDEO

L: VIDEO

•Abbreviation

CND : Canadian model

KR : Korea model

•Waverforms

202 ns

3.1 Vp-p

4.2 Vp-p

81.3 ns

IC505 wa (XOUT)

1 V/DIV, 20 ns/DIV

IC509 qd (XOUT)

1 V/DIV, 100 ns/DIV

1.8 Vp-p

20.2 ns

IC108 rk (XFSOIN)

0.5 V/DIV, 20 ns/DIV

IC506 qs (MCLK2)

1 V/DIV, 20 ns/DIV

4.2 Vp-p

71.9 ns

Ver. 1.2

Note:

The components identi-

fied by mark 0or dotted

line with mark 0are criti-

cal for safety.

Replace only with part

number specified.

Note:

Les composants identifiés par

une marque 0sont critiques

pour la sécurité.

Ne les remplacer que par une

piéce portant le numéro

spécifié.

RHT-G1000

4-1. BLOCK DIAGRAM –VIDEO SECTION–

Q208

IC209

VIDEO AMP

AV SEL0-3

J201

DSP SECTION

(Page 10)

• Signal path

: VIDEO

: Y

: COMPONENT VIDEO

24 OUTIN

P_SAVE

AV_SEL3

AV_SEL1

AV_SEL0

AV_SEL2

AV_SEL1

AV_SEL0

SW1

SW2

AV_SEL2

IC204

VIDEO SWITCH

IC213

VIDEO AMP

OUT

IN1

9IN2

14 IN3

CTL3

CTL1

CTL2

SAT VIDEO OUT

J203 (1/3)

VIDEO OUT

DVD

J204 (1/3)

/B-Y

/R-Y

SAT IN

VIDEO

J205 (1/3)

23 2 4

VIDEO OUT

/B-Y

/R-Y

DVD IN

COMPONENT

(1/2)

COMPONENT

(2/2)

J207

J206

/B-Y

/R-Y

TV OUT

/B-Y

/R-Y

VIDEO IN

1010

RHT-G1000

–DSP SECTION–

ANTENNA

80 77 79 85

787675

IC505

DIGITAL AUDIO

INTERFACE

BCK

LRCK

CSFLAG

XSTATE

DIR_D0

DIR_CLK

DIR_HCE

CS FLAG

DIR_RST

ERROR

AUDIO

SDI2

DIR_ZERO

KFSIO

BCKI1

BCKI2

LRCKI2

LRCKI1

CKOUT

DATA

AD RST

DIR/AD

IC506

DIGITAL AUDIO

PROCESSOR

IC509 (1/3)

SYSTEM CONTROLLER

X500

12.288MHz

Q206

Q207

J202

Q205 AV_SEL1

AV_SEL0

AV_SEL2

AV_SEL0-3

XIN

XOUT

DIN1

D0 – D15

A0 – A15

72-75

77-80

98,99

102-105

107,108

64-66

82-85

92-97

109,110

112

113

DSP DIN/DIR DIN

DSP PM

DIR HDOUT

DSP CLK/DIR CLK

DIR HCE

DIR XSTATE

LRCKO

GP10

45 17

WEO

D0-D15

A0-A15

CS0

44 6

BCKO

SCKOUT

SD01

SD02

SD03

HCLK

GP12

HCS

HD OUT

HACN

LRCKO

D1 - D3, MCKO,

BCKO, LRCKO

BCKO

MCKO

IC210

AMP

IC501

A/D CONVERTER

DOUT

SCKI

LRCK

LIN

RIN

CBA

BCK

PDWN

XSTATE

AV select0

AV select1

AV select2

AV select3

AV SEL1

AV SEL2

AV SEL3

AV SEL0

60 5963

DSP XRST

BYPASS

DSP GP9

DSP BST

DIR RST

DSP ACK

DSP DOUT

DSP HCE

DSP SKIP

DIR CSFLAG

XRST

GP9

BS T

EXLOCK

GP8

SDI1

HDIN

J203 (2/3)

J203 (3/3)

XMODE

DIN

DIR_DO

DIR_CLK

DIR_HCE

XSTATE

DIR_RST

CSFLAG

DIR RERR DIR_RERR

DIR_RERR

DIR ZERO DIR_ZERO

IC507

SD-RAM

IC518

SELECTOR

AUDIO

SECTION

(Page 11)

VIDEO

SECTION

(Page 9)

7-10

13-16

29-32

35-38

5-1

44-42

27-24

21-18

IC512

DIGITAL AUDIO DELAY

SDO

BYP

LRI

BCKI

SDI

RST

IC205

SPDIF INPUT

SELECTOR

910 11

IC206

AUDIO INPUT

SELECTOR L-CH

910 11

IC207

AUDIO INPUT

SELECT R-CH

910 11

IC208

WAVE

SHAPER

IC203

OPTICAL

RECEIVER

IC202

OPTICAL

RECEIVER

MCLK1

X501

13.90MHz MCLK2

Q201

BUFFER

Q204

BUFFER

J204 (2/3)

J204 (3/3)

IC201

OPTICAL

RECEIVER

Q203

BUFFER

J205 (2/3)

J205 (3/3)

IC200

OPTICAL

RECEIVER

Q202

BUFFER

FM/AM TUNER UNIT

CLK

TUNED

FM ANT

GND

AM ANT

GND

L-CH

R-CH

RDS_DATA

RDS_CLK

PLL_DO

RDS_DATA

RDS_CLK

PLL_CLK

PLL_CE

TUNED

PLL_DI

COAXIAL

75Ω

PLL_DI

PLL_CLK

PLL_CE

TUNED

PLL_DO

PLL_DI

PLL_CLK

PLL_CE

TUNED

PLL_DO RDS_DATA

RDS_DATA RDS_CLK

RDS_CLK

AUDIO IN

OPTICAL IN

COAXIAL IN

AUDIO IN

OPTICAL IN

COAXIAL IN

AUDIO IN

OPTICAL IN

COAXIAL IN

SAT

DVD

VIDEO

: AUDIO

: DIGITAL IN

• Signal Path

: TUNER

AEP, UK

Ver. 1.1

Andere Handbücher für RHT-G1000 - Home Theater Built-in Sound Rack...

Inhaltsverzeichnis

Andere Sony Sprecher Handbücher

Sony

Sony XS-F6924 Bedienungsanleitung

Sony

Sony BSP10 Bedienungsanleitung

Sony

Sony XS-GT5726A Marketing Bedienungsanleitung

Sony

Sony SRS-NWT10M Benutzerhandbuch

Sony

Sony WSF-150 Bedienungsanleitung

Sony

Sony Espanol) Bedienungsanleitung

Sony

Sony SRS-XB402G Bedienungsanleitung

Sony

Sony SRS-BTV5 Referenzhandbuch

Sony

Sony SRS-XP700 Referenzhandbuch

Sony

Sony RDP-XA900iPN Bedienungsanleitung

Sony

Sony SRS-XG300 Bedienungsanleitung

Sony

Sony LSPX-S1 Bedienungsanleitung

Sony

Sony RDP-XA700iPN Bedienungsanleitung

Sony

Sony SRS-XE200 Bedienungsanleitung

Sony

Sony XS-W4021 Bedienungsanleitung

Sony

Sony SCA-S30 Bedienungsanleitung

Sony

Sony SRS-XG500 Bedienungsanleitung

Sony

Sony SRS-XB30 Bedienungsanleitung

Sony

Sony BDV-NF7220 Bedienungsanleitung

Sony

Sony XS-MP61 Bedienungsanleitung

Sony

Sony SRS-XB501G Bedienungsanleitung

Sony

Sony SS-CTB121 Bedienungsanleitung

Sony

Sony SRS-BTM8 Bedienungsanleitung

Sony

Sony SRS-XB21 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung