Sony CPF-IX001 - Wireless PC-Linked Audio System Gebrauchs- und Pflegehandbuch

Operating Instructions Mode d’emploi Manual de instrucciones

Bedienungsanleitung Gebruiksaanwijzing Istruzioni per l’uso

Bruksanvisning Instrukcja obsługi Brugsanvisning

Käyttöohjeet Instruções de operação

Wireless Network Audio System

3-275-059-12(1)

CPF-IX001

– Firmware Update Manual –

2GB

This manual describes the method of updating the CPF-IX001 firmware, and the functions added by

this firmware update. Be sure to also refer to the Operating Instructions and the Quick Setup Guide

included with the CPF-IX001.

Functions added by the firmware update....................................................................................3

Required application software ....................................................................................................3

Updating the firmware ................................................................................................................4

Setting of wireless LAN connection...........................................................................................5

— Wi-Fi Setup

Listening to the same music in different rooms..........................................................................7

— PARTY MODE

Naming the unit...........................................................................................................................9

— My Name

Table of Contents

3GB

The following three functions have been added.

1) Wi-Fi Setup (see page 5)

Previously the CPF-IX001 wireless LAN setup was performed using a computer, but this firmware

update lets users perform the wireless LAN setup using only the CPF-IX001 (Wi-Fi Setup). Users

should select the setup method according to the operating environment.

2) PARTY MODE (see page 7)

If you have more than one CPF-IX001/TDM-NC1, you can enjoy listening to the same music in

different rooms.

3) My Name (see page 9)

You can assign an optional name to the CPF-IX001. When using multiple CPF-IX001, you can view

the names of the connected CPF-IX001 in the PLAYLISTS window of the M-crew Server software.

In addition, the following item has also changed.

• Network menu name change

The “WLAN SETUP?” name has been changed to “SETUP BY PC?”. However, the function is

unchanged.

With this firmware update, it is also necessary to upgrade the M-crew Server software version you are

using.

Required application software: M-crew Server Ver. 2.5.0.0 or newer

Notes

• Users who have already installed M-crew Server Ver. 2.5.0.0 or newer do not need to upgrade the version.

• For details on installation, refer to the Installation instructions supplied with the M-crew Server software.

Functions added by the firmware update

Required application software

4GB

The explanation below assumes that you have

already downloaded the firmware from the Sony

website to your computer.

1Turn on the CPF-IX001.

2Press SUSPEND to start up the

network unit.

3Press MENU.

4Press .or >repeatedly until

“WLAN SETUP?” appears, then press

ENTER.

The IP address appears.

5Start up the “WLAN Setup Assistant”

on your computer.

Select [Start] - [All Programs] - [M-crew

Server] - [TOOLS] - [WLAN Setup

Assistant].

6Click [Next].

Wait a moment for Internet Explorer to start

up.

Note

If the web browser (Internet Explorer) does not

start up automatically, start up the web browser

manually, and enter the IP address displayed on

the CPF-IX001 in the address bar of the web

browser.

7Enter “root” to “User name” section.

Leave “Password” section blank, and

click [OK] to login.

8Select the language.

9Click “Firmware Update” in the

“Menu”.

Updating the firmware

./>

ENTER

SUSPEND

5GB

10Confirm the version of the current

firmware is 1.00A or 1.01A.

11Select the firmware file.

Click [Browse] to show the window for

selecting the firmware.

12Click [Send] to update.

If you select the right firmware, updating

starts. Click [Restart] when the update is

completed.

If you select an incorrect firmware, click

[Retry] and select the correct one.

Note

Do not restart the CPF-IX001, set it to the suspended

mode, or turn off the power while updating the

firmware.

1Check that the WIRELESS/WIRED

selector on the network unit is set to

WIRELESS.

2Turn on the CPF-IX001.

3Press SUSPEND to start up the

network unit.

4Confirm the settings of your wireless

system.

Check the following items of your wireless

LAN router to set the same information for

the CPF-IX001.

SSID (Wireless Network Name):

________________________________________

If your wireless LAN router security is

enabled,

Wireless Network Key:

________________________________________

Note

The wireless connection setup must be made

using a computer if;

– you set the wireless network key (WEP) to

other than “WEP key No. 1”.

– you set the wireless LAN router not to transmit

SSID (stealth mode).

For details, refer to the Quick Setup Guide

included with the CPF-IX001, or “Explanation of

wireless setup windows” and “Wireless LAN

Setup window” under “Additional information”

in the Operating Instructions included with the

CPF-IX001.

Setting of wireless LAN

connection

— Wi-Fi Setup

6GB

Tips

• For details on how to check the wireless LAN

router settings, refer to the operation manual of

your wireless LAN router.

• In some cases, SSID name and wireless

network key numbers/characters are written on

the wireless LAN router.

• Check that your wireless LAN router uses the

latest firmware version. For details, refer to the

operation manual of your wireless LAN router.

5Press MENU.

6Press .or >repeatedly until “Wi-

Fi SETUP?” appears, then press

ENTER.

“SSID?” appears.

7Press ENTER.

“Searching” appears.

8Press .or >repeatedly until your

wireless LAN router SSID name

appears, then press ENTER.

If you set the wireless network key in the

wireless LAN setting, “KEY?” appears.

Press ENTER.

If you do not set the wireless network key,

the CPF-IX001 restarts.

Note

The CPF-IX001 cannot display the “~” (tilde)

character, so care should be taken for the

following two points.

– When the SSID name contains a “~”, this is

displayed as a space.

– You cannot enter “~” by wireless network key

entry. When “~” entry is necessary, perform the

wireless LAN setup using your computer. For

details, refer to the Quick Setup Guide included

with the CPF-IX001, or “Explanation of

wireless setup windows” and “Wireless LAN

Setup window” under “Additional information”

in the Operating Instructions included with the

CPF-IX001.

9Enter the wireless network key

numbers/characters.

Use ./>to choose the character,

m/Mto skip entered digits.

Also you can choose letter types using +/–.

Letter types change as shown below:

10Press ENTER.

The CPF-IX001 restarts and the setup is

completed.

upper case ylower case

space ysymbol ynumber

7GB

If you have more than one CPF-IX001/TDM-

NC1, you can enjoy listening to the same music

in different rooms.

‘host’ unit, and the other(s) CPF-IX001/TDM-

NC1 can play the same music as ‘guest’ unit(s).

Notes

• You cannot use the WEB RADIO function in

PARTY MODE.

• Guest unit operations are restricted.

• You can add up to four guest units, but depending on

the connection environment, the number of

connectable guest units may be fewer.

• Depending on the environment, some guest units

may lag in playback or cannot play. If this occurs,

remove those guest units.

Using the PARTY MODE

1Turn on the multiple CPF-IX001.

2Make sure each CPF-IX001 is

connected to the network.

3Make sure the host unit is connected to

the media server in stop mode.

The following steps 4-6 are for the host unit

only.

4Press MENU.

5Press .or >repeatedly until

“PARTY MODE?” appears, then press

ENTER.

“START?” appears.

6Press ENTER.

“Searching” appears.

Playback starts after “Searching”

disappears.

Stopping the PARTY MODE

The following procedures are for the host unit

only.

1Press MENU.

2Press .or >repeatedly until

“PARTY MODE?” appears, then press

ENTER.

“END?” appears.

3Press ENTER.

Listening to the same

music in different rooms

— PARTY MODE

./>

ENTER

8GB

Blocking guest units from

joining the PARTY MODE

You can block some guest units from joining the

PARTY MODE. The default setting is

unblocked.

The following procedures are for the guest units

which you want to block.

1Press MENU.

2Press .or >repeatedly until

“PARTY MODE?” appears, then press

ENTER.

3Press .or >repeatedly until

“AUTO JOIN?” appears, then press

ENTER.

4Press .or >repeatedly until

“OFF” appears, then press ENTER.

Tip

The CPF-IX001 memorizes the blocked setting. If you

want to unlock the setting, select “ON” in step 4.

Joining the PARTY MODE

You can invite guest units to join the PARTY

MODE.

The following procedures are for the guest units

only.

1Press MENU.

2Press .or >repeatedly until

“PARTY MODE?” appears, then press

ENTER.

3Press .or >repeatedly until

“JOIN?” appears, then press ENTER.

Leaving the PARTY MODE

You can exit guest units from the PARTY

MODE.

The following procedures are for the guest units

only.

1Press MENU.

2Press .or >repeatedly until

“PARTY MODE?” appears, then press

ENTER.

3Press .or >repeatedly until

“LEAVE?” appears, then press ENTER.

9GB

You can name the multiple CPF-IX001 for

identification. After naming a CPF-IX001, the

name will appear in the M-crew Server.

Setting the name using the CPF-

IX001

1Press MENU.

2Press .or >repeatedly until

“NET SETUP?” appears, then press

ENTER.

3Press .or >repeatedly until “MY

NAME?” appears, then press ENTER.

4Press .or >repeatedly to select

a desired name from the preset names,

then press ENTER.

Setting the name using your

computer

You can also create an original name.

1Press MENU.

2Press .or >repeatedly until

“SETUP BY PC?” appears, then press

ENTER.

The IP address appears.

3Start up the “WLAN Setup Assistant”

on your computer.

Select [Start] - [All Programs] - [M-crew

Server] - [TOOLS] - [WLAN Setup

Assistant].

4Click [Next].

Wait a moment for Internet Explorer to start

up.

Note

If the web browser (Internet Explorer) does not

start up automatically, start up the web browser

manually, and enter the IP address displayed on

the CPF-IX001 in the address bar of the web

browser.

5Enter “root” to “User name” section.

Leave “Password” section blank, and

click [OK] to login.

Naming the unit

—MyName

./>

ENTER

10GB

6Select the language.

7Enter a desired name to “My Name”

section and click [Setup].

Andere Handbücher für CPF-IX001 - Wireless PC-Linked Audio System

Inhaltsverzeichnis

Sprachen:

Andere Sony Stereoanlage Handbücher

Sony

Sony CMT-BT60 Bedienungsanleitung

Sony

Sony HCD-GN700 Bedienungsanleitung

Sony

Sony CMT-SE9 Bedienungsanleitung

Sony

Sony CMT-BT80W Bedienungsanleitung

Sony

Sony CMT-EP707 (CMTEP707) Handbuch

Sony

Sony MHC-GT5D Bedienungsanleitung

Sony

Sony SRS-X33 Benutzerhandbuch

Sony

Sony CMT-CPX11 Bedienungsanleitung

Sony

Sony HD-VR90AV Bedienungsanleitung

Sony

Sony LBT-XGV80 Bedienungsanleitung

Sony

Sony GTK-N1BT Bedienungsanleitung

Sony

Sony MDS-JE510 - Mini Disc Player Recorder Bedienungsanleitung

Sony

Sony HCD-RG190 Bedienungsanleitung

Sony

Sony MHC-DX101 Bedienungsanleitung

Sony

Sony HCD-VP100 Bedienungsanleitung

Sony

Sony MHC-GX570XM Bedienungsanleitung

Sony

Sony MHC-C55 Bedienungsanleitung

Sony

Sony HCD-GTX66 Bedienungsanleitung

Sony

Sony HCD-GTR88 Bedienungsanleitung

Sony

Sony ICF-DS15iPN Bedienungsanleitung

Sony

Sony AIWA XR-MN5 Bedienungsanleitung

Sony

Sony MEX-BT38UW - Bt Slot Usb 1wire Bedienungsanleitung

Sony

Sony MHC-RG555 Bedienungsanleitung

Sony

Sony CMT-CP333 - Micro Hi Fi Component System Einrichtungshandbuch

Beliebte Stereoanlage Handbücher anderer Marken

LG CM3330B Bedienungsanleitung

Cetacea Sound

Cetacea Sound CVS-II Bedienungsanleitung

Denon

Denon UCD-250 Bedienungsanleitung

Sanyo

Sanyo DC-MX41i Bedienungsanleitung

Sharp

Sharp CD-ES600V Bedienungsanleitung

Exibel

Exibel BDX600-UK Bedienungsanleitung

Sanyo

Sanyo DC-F320 Bedienungsanleitung

Philips

Philips FWM583X Bedienungsanleitung

Sharp

Sharp CD-C462 Bedienungsanleitung

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Bedienungsanleitung

Aiwa

Aiwa XR-EM70 Bedienungsanleitung

Cyrus

Cyrus Lyric Bedienungsanleitung

Philips

Philips MCM159/98 Bedienungsanleitung

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Bedienungsanleitung

RCA

RCA RS3965SB Bedienungsanleitung

Sharp

Sharp XL-UH240 Bedienungsanleitung

Philips

Philips FW 690 Bedienungsanleitung

LG FB165DAB Bedienungsanleitung