Sony LBT-XB44KS Bedienungsanleitung

Operating Instructions

3-862-953-11(1)

Compact Hi-Fi

Stereo System

LBT-XB44KS

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

Do not install the appliance in a confined space,

such as a bookcase or built-in cabinet.

Laser component in this product is capable of

emitting radiation exceeding the limit for Class 1.

This caution label is located inside the unit.

This stereo system is equipped with the Dolby* B-

type noise reduction system.

* Dolby noise reduction manufactured under license

from Dolby Laboratories Licensing Corporation.

“DOLBY” and the double-D symbol aare

trademarks of the Dolby Laboratories Licensing

Corporation.

This appliance is classified as

a CLASS 1 LASER product.

The CLASS 1 LASER

PRODUCT MARKING is

located on the rear exterior.

Table of Contents

Getting Started

Step 1: Hooking up the system ............ 4

Step 2: Setting the time ......................... 6

Step 3: Presetting radio stations .......... 7

Connecting optional AV

components ...................................... 8

Basic Operations

Playing a CD ......................................... 11

Recording a CD .................................... 13

Listening to the radio ........................... 14

Recording from the radio .................... 15

Playing a tape........................................ 16

Recording from a tape ......................... 18

The CD Player

Using the CD display........................... 19

Playing CD tracks repeatedly ............. 19

Playing CD tracks in random

order ................................................ 20

Programming CD tracks ..................... 21

Playing CDs without interruption ..... 22

The Tape Deck

Recording on a tape manually ........... 23

Recording CDs by specifying the track

order ................................................ 24

DJ Effects

Looping part of a CD ........................... 26

Flashing part of a CD ........................... 26

Waving the equalizer ........................... 27

Sound Adjustment

Adjusting the sound ............................ 28

Selecting the audio emphasis ............. 29

Adjusting the audio emphasis............ 30

Making a personal audio emphasis

file .................................................... 31

Other Features

Singing along: Karaoke ...................... 32

Falling asleep to music ........................ 34

Waking up to music ............................. 35

Timer-recording radio programs ....... 36

Additional Information

Precautions ............................................ 38

Troubleshooting ................................... 39

Specifications ........................................ 41

Index....................................................... 42

Step 1: Hooking up the system

Getting Started

Follow steps 1through 5to hook up your system using the supplied cords and accessories.

Left speakerRight speaker

AM loop antenna

FM antenna

1 1

1Connect the speakers.

1Connect the speaker cords to

SPEAKER jacks of the same color.

Keep the speaker cords away from the

antennas to prevent noise.

2Insert only the stripped portion of the

cord. Inserting the vinyl portion will

interfere with the speaker connection

and no sound will come from the

speaker.

2Connect the FM/AM antennas.

Set up the AM loop antenna, then

3Set VOLTAGE SELECTOR to the

position of your local power line

voltage.

4Connect the power cord to a wall

outlet.

The demonstration appears in the

display.

If the plug on this unit does not fit your

wall outlet, detach the supplied adapter

from the plug.

5Deactivate the demonstration mode

by pressing DISPLAY/DEMO while

the system is off.

Inserting two size AA (R6)

batteries into the remote

Tips

• With normal use, the batteries should last for

about six months. When the remote no longer

operates the system, replace both batteries with

new ones.

• When you set the time, the demonstration is

deactivated.

To activate the demonstration again, press

DISPLAY/DEMO while the system is off.

Note

If you do not use the remote for a long period of

time, remove the batteries to avoid possible damage

from battery leakage.

When carrying this system

Do the following to protect the CD

mechanism.

1Press FUNCTION repeatedly until “CD”

appears in the display.

2Hold down PLAY MODE and press 1/uto

turn off the system.

220-240V

VOLTAGE SELECTOR

110-120V

Black (’)Red (‘)

–

AM loop antenna

Extend the FM wire

antenna horizontally.

FM75

Step 2: Setting the

time

5Press ENTER/NEXT.

The clock starts.

Tips

• If you make a mistake, start over from step 1.

• To change the time while the power is on, do the

following:

1 Press t/CLOCK SET.

2 Press TUNING +/– to select "SET CLOCK".

3 Press ENTER/NEXT.

4 Perform steps 2 through 5 above.

You must set the time before using the timer

functions.

1Press t/CLOCK SET.

The hour indication flashes.

2Press TUNING +/– to set the hour.

3Press ENTER/NEXT.

The minutes indication flashes.

4Press TUNING +/– to set the

minutes.

3,51 2,4

Step 3: Presetting

radio stations

You can preset up to 40 stations, 20 for FM, 10

for MW and 10 for LW.

1Press TUNER/BAND repeatedly

until the band you want appears in

the display.

Each time you press this button, the

band changes as follows:

FM nMW nLW

2Press TUNING MODE repeatedly

until “AUTO” appears in the

display.

3Press TUNING +/–.

The frequency indication changes and

scanning stops when the system tunes in

a station. “TUNED” and “STEREO” (for

a stereo program) appear.

4Press TUNER MEMORY.

A preset number flashes in the display.

5Press TUNING +/– to select the

preset number you want.

6Press ENTER/NEXT.

The station is stored.

7Repeat steps 1 through 6 to store

other stations.

3,5 1246

DOLBY NR

OFF TUNED

STEREOAUTO

ALL DISC S

DOLBY NR

OFF TUNED

STEREOAUTO

ALL DISC S

MHz

DOLBY NR

OFF TUNED

STEREOAUTO

ALL DISC S

continued

1/u

(Power)

Connecting

optional AV

components

To enhance your system, you can connect

optional components. Refer to the

instructions included with each component

for details.

Connecting audio

components

Connecting a turntable

Be sure to match the color of the plugs and

the connectors. To listen to the sound from

the connected turntable, press FUNCTION

repeatedly until “PHONO” appears.

Note

Using the turntable at high volume may cause

distortion or howling. This is often caused by the

bass sound from the speakers. The bass sound may

be picked up by the needle of the turntable, and

produce the distortion or howling. To avoid this, do

the following:

1Keep some distance between the speakers and the

turntable.

2Stop using the surround effect.

3Install the speakers or the turntable on a firm and

stable surface.

4Press SUPER WOOFER repeatedly until the

indicator on this button goes off.

To the audio output of the turntable

To tune in a station with a weak

signal

Press TUNING MODE repeatedly until

“MANUAL” appears in step 2, then press

TUNING +/– to tune in the station.

To change the preset number

Start over from step 1.

To change the AM tuning interval

The AM tuning interval is factory-preset to 9 kHz

(10 kHz in some areas). To change the AM tuning

interval to 10 kHz (or 9 kHz), press TUNER/BAND

repeatedly until “AM” appears first, then turn off

the system. While holding down ENTER/NEXT,

turn the system back on. When you change the

interval, the AM preset stations will be erased. To

reset the interval, repeat the same procedure.

Note

The preset stations are canceled when you

disconnect the power cord or if a power failure

occurs for half a day.

Step 3: Presetting radio stations

(continued)

Connecting a VCR

Be sure to match the color of the plugs and

the connectors. To listen to the sound from

the connected VCR, press FUNCTION

repeatedly until “VIDEO” appears.

Connecting an MD deck for digital

recording

You can record a CD to an MD digitally by

connecting your MD deck using an optical

cable.

Connecting an MD deck for analog

recording

Be sure to match the color of the plugs and

the connectors. To listen to the sound of the

connected MD deck, press FUNCTION

repeatedly until “MD” appears.

Note

If you cannot select “MD” by pressing FUNCTION,

press 1/uwhile pressing FUNCTION when the

power is turned off. “VIDEO” will be switched to

“MD.” To return to “VIDEO,” do the same

procedure.

To the digital input of the MD deck

To the audio outputs

of the MD deck To the audio inputs of

the MD deck

To the audio output of the VCR

continued

Connecting outdoor

antennas

Connect an outdoor antenna to improve the

reception.

FM antenna

Connect an optional FM outdoor antenna.

You can also use the TV antenna instead.

75-ohm coaxial cable

(not supplied)

Screw clamp

Ground wire (not supplied)

Insulated wire (not supplied)

Screw clamp

Ground wire (not supplied)

AM antenna

Connect a 6 to 15 meter (20 to 50 feet)

insulated wire to the AM antenna terminal.

Leave the supplied AM loop antenna

connected.

Important

If you connect an outdoor antenna, connect a

ground wire to the yterminal with the screw

clamp. To prevent a gas explosion, do not

connect the ground wire to a gas pipe.

Connecting optional AV

components (continued)

FM75

Inhaltsverzeichnis

Andere Sony Stereoanlage Handbücher

Sony

Sony PS-HX500 Bedienungsanleitung

Sony

Sony CFD-S70 Bedienungsanleitung

Sony

Sony ZS-PE40CP Installationsanleitung

Sony

Sony MHC-GN1300D Bedienungsanleitung

Sony

Sony MEX-BT3850U Produkthandbuch

Sony

Sony LBT-ZX8 - Mini Hi-fi Component System Bedienungsanleitung

Sony

Sony HCD-FX300i - Compact Disc Receiver Bedienungsanleitung

Sony

Sony SRS-X9 Bedienungsanleitung

Sony

Sony CMT-EX200 - Micro Hi Fi Component System Bedienungsanleitung

Sony

Sony HCD-HPX9 - Hi Fi Components Bedienungsanleitung

Sony

Sony HCD-XGR6 Bedienungsanleitung

Sony

Sony CMT-M700DVD Bedienungsanleitung

Sony

Sony SRS-X88 Bedienungsanleitung

Sony

Sony MEX-BT2500 Bedienungsanleitung

Sony

Sony HCD-D170 Bedienungsanleitung

Sony

Sony SRS-X77 Referenzhandbuch

Sony

Sony CMT-U1BT - Micro Hi-fi Component System Bedienungsanleitung

Sony

Sony HCD-D60 Bedienungsanleitung

Sony

Sony MHC-RXD7AV - 3 Cd Mini Shelf System Bedienungsanleitung

Sony

Sony HCD-A490 Bedienungsanleitung

Sony

Sony CMT-BX3 Bedienungsanleitung

Sony

Sony MHC-F150 - Mini Hi Fi System Bedienungsanleitung

Sony

Sony MHC-771 - Mini Hi-fi Component System Bedienungsanleitung

Sony

Sony HTC-NX300 Bedienungsanleitung

Beliebte Stereoanlage Handbücher anderer Marken

LG CM3330B Bedienungsanleitung

Cetacea Sound

Cetacea Sound CVS-II Bedienungsanleitung

Denon

Denon UCD-250 Bedienungsanleitung

Sanyo

Sanyo DC-MX41i Bedienungsanleitung

Sharp

Sharp CD-ES600V Bedienungsanleitung

Exibel

Exibel BDX600-UK Bedienungsanleitung

Sanyo

Sanyo DC-F320 Bedienungsanleitung

Philips

Philips FWM583X Bedienungsanleitung

Sharp

Sharp CD-C462 Bedienungsanleitung

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Bedienungsanleitung

Aiwa

Aiwa XR-EM70 Bedienungsanleitung

Cyrus

Cyrus Lyric Bedienungsanleitung

Philips

Philips MCM159/98 Bedienungsanleitung

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Bedienungsanleitung

RCA

RCA RS3965SB Bedienungsanleitung

Sharp

Sharp XL-UH240 Bedienungsanleitung

Philips

Philips FW 690 Bedienungsanleitung

LG FB165DAB Bedienungsanleitung