Sony SDX-800V Series Bedienungsanleitung

AIT Drive

2-891-321-12(1)

2006 Sony Corporation

AIT-5 TAPE DRIVE

SDX-1100V Series

AIT-4 TAPE DRIVE

SDX-900V Series

AIT-3 Ex TAPE DRIVE

SDX-800V Series

User’s Guide

WARNING

To reduce the risk of fire or

electric shock, do not expose

this apparatus to rain or

moisture.

To avoid electrical shock, do not

open the cabinet.

Refer servicing to qualified

personnel only.

This document contains proprietary

information which is protected by

document may be photocopied,

reproduced or translated to another

language without prior written consent

of Sony.

The information contained in this

document is subject to change without

notice.

SONY MAKES NO WARRANTY

OF ANY KIND WITH REGARD TO

THIS DOCUMENT.

Sony shall not be liable for errors

contained herein, indirect, special,

incidental or consequential damages in

connection with the furnishing,

performance or use of this document.

Your SDX-1100V is assigned a Model

No. SDX-1100 for regulatory

compliance certifications.

Your SDX-900V and SDX-800V are

assigned a Model No. ATDNA4 for

regulatory compliance certifications.

The number is indicated on the model

number label on your drive along with

the rated voltage and current.

Hinweis

Maschinenlärminformations-

Verordnung - 3. GPSGV, der höchste

Schalldruckpegel beträgt 70 dB(A)

oder weniger gemäss EN ISO 7779.

ATTENTION

According to the EU Directives related

to product safety, EMC and R&TTE

the manufacturer of this product is

Sony Corporation, 1-7-1 Konan

Minato-ku Tokyo, 108-0075 Japan.

The Authorised Representative is Sony

Deutschland GmbH, Hedelfinger

Strasse 61,70327 Stuttgart, Germany.

For any service or guarantee matters

please refer to the addresses given in

separate service or guarantee

documents.

AUFMERKSAMKEIT

Im Sinne der EU Richtlinien bezüglich

Produktsicherheit, EMV und R&TTE

ist Sony Corporation, 1-7-1 Konan

Minato-ku Tokyo, 108-0075 Japan der

Hersteller dieses Produktes.

Bevollmächtigter ist Sony

Deutschland GmbH, Hedelfinger

Strasse 61, D-70327 Stuttgart. Für

Service oder Garantieangelegenheiten

wenden Sie sich bitte an die in

separaten Service oder

Garantiedokumenten angegebenen

Adressen.

European Union Restriction of

Hazardous Substances Directive

compliant.

Entspricht der Richtlinie der

Europäischen Union zur

Beschränkung der Verwendung

gefährlicher Stoffe.

VORSICHT

Für kunden in Deutshland

Diese Ausrüstung erfüllt die

Europäischen EMC-Bestimmungen für

die Verwendung in folgender /

folgenden Umgebung(en):

•Wohngegenden

•Gewerbegebiete

•Leichtindustriegebiete

(Diese Ausrüstung erfüllt die

Bestimmungen der Norm EN55022,

Klasse B.)

IMPORTANT SAFEGUARDS

For your protection, please read these

safety instructions completely before

operating the appliance, and keep this

manual for future reference.

Carefully observe all warnings,

precautions and instructions on the

appliance, or described in the

operating instructions and adhere to

them.

USE

Power Sources –This unit should be

operated only from the type of power

source indicated on the marking label.

If you are not sure of the type of

electrical power, consult your dealer or

local power company.

For the unit with a three-wire

grounding type ac plug:

If you are unable to insert the plug into

the outlet, contact your electrician to

have a suitable plug installed. Do not

defeat the safety purpose of the

grounding plug.

AC Power cord: (for AC mains

operating unit only)

The AC power cord should have

appropriate safety approvals or

marking for the country in which the

equipment will be used. Consult your

dealer or local power company.

Cleaning –Unplug the unit from the

wall outlet before cleaning or

polishing it. Do not use liquid

cleaners or aerosol cleaners.

Use a cloth lightly dampened with

water for cleaning the exterior of the

unit.

Object and Liquid Entry –Never

push objects of any kind into the unit

through openings as they may touch

dangerous voltage points or short out

parts that could result in a fire or

electric shock. Never spill liquid of

any kind on the unit.

INSTALLATION

Water and Moisture –Do not use

power-line operated units near water –

for example, near a bathtub,

washbowl, kitchen sink, or laundry

tub, in a wet basement, or near a

swimming pool, etc.

Power-Cord Protection –Route the

power cord so that it is not likely to be

walked on or pinched by items placed

upon or against it, paying particular

attention to the plugs, receptacles, and

the point where the cord exits from the

appliance.

Accessories –Do not place the unit on

an unstable cart, stand, tripod, bracket,

or table. The unit may fall, causing

serious injury to a child or an adult,

and serious damage to the unit. Use

only a cart, stand, tripod, bracket, or

table recommended by the

manufacturer.

Ventilation –The slots and openings

in the cabinet are provided for

necessary ventilation. To ensure

reliable operation of the unit, and to

protect it from overheating, these slots

and openings must never be blocked or

covered.

•Never cover the slots and openings

with a cloth or other materials.

•Never block the slots and openings

by placing the unit on a bed, sofa,

rug, or other similar surface.

•Never place the unit in a confined

space, such as a bookcase, or built-

in cabinet, unless proper ventilation

is provided.

SERVICE

Damage Requiring Service –Unplug

the unit from the wall outlet and refer

servicing to qualified service

personnel under the following

conditions:

•When the power cord or plug is

damaged or frayed.

•If liquid has been spilled or objects

have fallen into the unit.

•If the unit has been exposed to rain

or water.

• If the unit has been subject to

excessive shock by being dropped,

or the cabinet has been damaged.

•If the unit does not operate normally

when following the operating

instructions. Adjust only those

controls that are specified in the

operating instructions. Improper

adjustment of other controls may

result in damage and will often

require extensive work by a

qualified technician to restore the

unit to normal operation.

•When the unit exhibits a distinct

change in performance - this

indicates a need for service.

Servicing –Do not attempt to service

the unit yourself as opening or

removing covers may expose you to

dangerous voltage or other hazards.

Refer to all servicing to qualified

service personnel.

Table of Contents

Overview .................................................................................................................. 6

Introduction .............................................................................................................. 6

About AIT Drives ............................................................................................ 6

Precautions ....................................................................................................... 8

Installation .............................................................................................................. 11

SCSI Connection/Setting the SCSI ID ........................................................... 11

Option Switches (DIP Switch) ....................................................................... 12

Mounting Holes .............................................................................................. 15

Reconfiguring From 5.25" Model to 3.5" Model ........................................... 16

Orientation...................................................................................................... 16

Attaching and Removing the Dust Cover ............................................................... 17

Attaching the Dust Cover ............................................................................... 17

Removing the Dust Cover .............................................................................. 18

Operation ................................................................................................................ 19

Location of 3 LEDs ........................................................................................ 19

Drive Operation .............................................................................................. 20

Emergency Tape Removal Procedure ............................................................ 22

Interface Implementation........................................................................................ 25

Supported SCSI Messages ............................................................................. 25

Supported SCSI Commands ........................................................................... 25

Specifications ......................................................................................................... 26

Product Specifications .................................................................................... 26

Sony Contacts ......................................................................................................... 28

• Sony cannot accept liability for data written to cartridges lost as a result of using this product.

• Sony bears no responsibility for any financial damages, lost profits, or claims made by third

parties arising from the use of this product.

Overview

The SDX-1100V, SDX-900V, and SDX-800V series drives are high

capacity data storage devices using Advanced Intelligent tape (AIT)

technology. The SDX-1100V, SDX-900V, and SDX-800V series drives

achieve high data reliability through Read-After-Write, an additional level

of Error Correction Code, and other features.

The SDX-1100V, SDX-900V, and SDX-800V series drives store data on

tape using standard formats called AIT (Advanced Intelligent Tape) and

ALDC.

Introduction

About AIT Drives

The SDX-1100V Series AIT-5 Tape Drives are internal AIT drive units that

use data cartridges conforming to the AIT-5 format.

The SDX-900V Series AIT-4 Tape Drives are internal AIT drive units that

use data cartridges conforming to the AIT-4 format.

The SDX-800V Series AIT-3 Ex Tape Drives are internal AIT drive units

that use data cartridges conforming to the AIT-3 Ex format.

The SDX-1100V series drives support the AIT-5, AIT-4, AIT-3 Ex, and

AIT-3 formats.

The SDX-900V series drives support the AIT-4 and AIT-3 Ex format.

The SDX-800V series drives support the AIT-3 Ex, AIT-3, AIT-2 Turbo,

AIT-2 (Read only), AIT-1 Turbo (Read only), AIT-1 (Read only), and

AIT-E Turbo (Read only) formats.

Features

The SDX-1100V series drives have the following features:

•Supports reading and writing to data cartridges conforming to the AIT-5,

AIT-4, AIT-3 Ex, and AIT-3 formats.

•The second-level error correction code guarantees high data reliability

writing to data cartridges conforming to the AIT-5, AIT-4, and AIT-3 Ex

formats.

•The third-level error correction code guarantees high data reliability

writing to data cartridges conforming to the AIT-3 format.

•Data compression provides 1,040 gigabytes of storage on SDX5-400C

data cartridges.*

The native capacity is 400 gigabytes of storage on SDX5-400C data

cartridges.

•Stored data are automatically checked for compression.

•Ultra 160 SCSI interface is fully supported for host computer access.

•Fragment rewrite function (AIT-5, AIT-4, AIT-3 Ex)

•Frame rewrite function (AIT-3)

The SDX-900V series drives have the following features:

•Supports reading and writing to data cartridges conforming to the AIT-4

and AIT-3 Ex formats.

•The second-level error correction code guarantees high data reliability

writing to data cartridges conforming to the AIT-4 and AIT-3 Ex formats.

•Data compression provides 520 gigabytes of storage on SDX4-200C data

cartridges.*

The native capacity is 200 gigabytes of storage on SDX4-200C data

cartridges.

•Stored data are automatically checked for compression.

•Ultra 160 SCSI interface is fully supported for host computer access.

•Fragment rewrite function

*This is assuming 2.6 : 1 compression ratio.

The degree of data compression attained while recording data varies according to

system environment and data type.

The SDX-800V series drives have the following features:

•Supports reading and writing to data cartridges conforming to the

AIT-3 Ex, AIT-3, and AIT-2 Turbo formats.

•Supports reading from data cartridges conforming to the AIT-2,

AIT-1 Turbo, AIT-1, and AIT-E Turbo formats.

•The second-level error correction code guarantees high data reliability

writing to data cartridges conforming to the AIT-3 Ex format.

•The third-level error correction code guarantees high data reliability

writing to data cartridges conforming to the AIT-3 format.

•Data compression provides 390 gigabytes of storage on SDX3X-150C

data cartridges.*

The native capacity is 150 gigabytes of storage on SDX3X-150C data

cartridges.

•Stored data are automatically checked for compression.

•Ultra 160 SCSI interface is fully supported for host computer access.

•Fragment rewrite function (AIT-3 Ex)

•Frame rewrite function (AIT-3)

*This is assuming 2.6 : 1 compression ratio.

The degree of data compression attained while recording data varies according to

system environment and data type.

Precautions

Installation

Avoid placing the drives in locations subject to:

–high humidity

–high temperature

– mechanical shock and vibration

–direct sunlight

*For details, see “Specifications” on page 26.

Operation

• Do not move the drives while they are operating. It may cause

malfunctions.

• Avoid exposing the drives to sudden changes from low to high

temperatures. This may cause condensation to collect inside the drives. If

the ambient temperature should suddenly rise while the drives are turned

on, turn them off and wait at least one hour before turning them back on.

If you attempt to operate the drives immediately after a sudden increase

in temperature, malfunctions may occur.

•Turning off the power to the drives while they are writing to tape may

cause the tape to become unreadable. All previously negotiated

parameters will be lost, whenever power to the drives is cycled.

Transportation

•Keep the original packing materials to facilitate safe transportation of the

drives.

•Always remove the tape/media cartridge before moving the drives. After

removing the drives from the computer, repack them into their original

packing.

Compatible Data Cartridges

The SDX-1100V series drives can be used with data cartridges marked with

the AIT-5, AIT-4, AIT-3 Ex, or AIT-3 logo.

The SDX-900V series drives can be used with data cartridges marked with the

AIT-4 or AIT-3 Ex logo.

The SDX-800V series drives can be used with data cartridges marked with the

AIT-3 Ex, AIT-3, AIT-2 Turbo, AIT-2 (read only), AIT-1 Turbo (read only),

AIT-1 (read only), or AIT-E Turbo (read only) logo.

AIT-E Turbo LOGO AIT-1 LOGO AIT-1 Turbo LOGO

AIT-2 LOGO AIT-2 Turbo LOGO AIT-3 LOGO

AIT-3 Ex LOGO AIT-4 LOGO AIT-5 LOGO

Caution

•Do not use cartridges other than the ones described above with this drive.

Be sure to use only the cartridges designed specifically for AIT.

•Do not use anything but AIT cartridges with this drive, as doing so can

damage the drive. Although commercially available 8 mm videotapes

resemble AIT cartridges in appearance, they have entirely different

specifications and cannot be used.

SCSI Termination

The SDX-1100V, SDX-900V, and SDX-800V series drives conform to the

Microsoft PC97 standard, which requires the internal (naked) drive to be

terminated with an external terminator.

Microsoft PC97 SCSI requirements

SCSI peripherals must not terminate the bus. Both internal and external cable ends are

instead terminated by plug-in connectors.

Example connection to the host computer and other peripheral devices

Host Computer Wide SCSI

68-pin cable Terminator

SDX-1100V/SDX-900V/SDX-800V series drive

Andere Handbücher für SDX-800V Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Lagerung Handbücher

Sony

Sony HD-EG5 Bedienungsanleitung

Sony

Sony CSM-100BS Bedienungsanleitung

Sony

Sony StorStation AITi130 Bedienungsanleitung

Sony

Sony MS-MT16G Bedienungsanleitung

Sony

Sony MS-M16/TQ Bedienungsanleitung

Sony

Sony MSAC-US40 - MemoryStick Flash Memory Card USB 2.0... Bedienungsanleitung

Sony

Sony MicroVault USM1GH Bedienungsanleitung

Sony

Sony SRR1000 Bedienungsanleitung

Sony

Sony SDT-7000 Series Bedienungsanleitung

Sony

Sony SAITe1300-F Bedienungsanleitung

Sony

Sony AIT-SDX570 Montageanleitung

Sony

Sony SDX-500 Series Bedienungsanleitung

Sony

Sony MSH-128S2 Bedienungsanleitung

Sony

Sony CSM100B Bedienungsanleitung

Sony

Sony MICROVAULT USM4GM Bedienungsanleitung

Sony

Sony MSX-M1GS Operating Instructions (Memory Stick... Bedienungsanleitung

Sony

Sony RMO-S551 Bedienungsanleitung

Sony

Sony MRW68E/D1/181 - Pro Duo USB Gebrauchs- und Wartungshandbuch

Sony

Sony USM1GE Bedienungsanleitung

Sony

Sony SDZ-S100 Bedienungsanleitung

Sony

Sony HD-EG5 Bedienungsanleitung

Sony

Sony SF16UX Bedienungsanleitung

Sony

Sony SR Series Bedienungsanleitung

Sony

Sony HD-E Series Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung