Sony DFS-700 Bedienungsanleitung

DME Switcher

3-203-834-12(1)

DFS-700/700P

Operating Instructions

Before operating the unit, please read this manual

thoroughly and retain it for future reference.

2000 Sony Corporation

DFS-700/700P

For customers in the USA (DFS-700 only)

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own

expense.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

The shielded interface cable recommended in this manual

must be used with this equipment in order to comply with the

limits for a digital device pursuant to Subpart B of Part 15 of

FCC Rules.

Caution

Television prograrms, films, video tapes and other materials

may be copyrighted.

Unauthorized recording of such material may be contrary to

the provisions of the copyright laws.

For the customers in Europe (DFS-700P only)

This product with the CE marking complies with both the

EMC Directive (89/336/EEC) and the Low Voltage Directive

(73/23/EEC) issued by the Commission of the European

Community.

Compliance with these directives implies conformity to the

following European standards:

• EN60950: Product Safety

• EN55103-1: Electromagnetic Interference (Emission)

• EN55103-2: Electromagnetic Susceptibility (Immunity)

This product is intended for use in the following

Electromagnetic Environment(s):

E1 (residential), E2 (commercial and light industrial), E3

(urban outdoors) and E4 (controlled EMC environment, ex.

TV studio).

Owner’s Record

The model and serial numbers are located in the rear.

Record these numbers in the spaces provided below. Refer

to them whenever you call upon your Sony dealer regarding

this product.

Model No. Serial No.

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

Table of Contents 3

Chapter 2

Location and

Function of Parts

and Controls

Chapter 1

Overview

Table of Contents

Features ofThis System ................................................1-1

Option Boards ................................................................1-3

Control Panel ................................................................. 2-1

Processor Unit..............................................................2-13

Front Panel ..................................................................... 2-13

Rear Panel ...................................................................... 2-13

Chapter 3

Basic Operation DME Switcher Introduction .......................................... 3-1

Sequence of Operations.................................................... 3-1

Example Operation (1): Wipe........................................... 3-2

Example Operation (2): Picture-in-Picture ...................... 3-5

Demonstration .................................................................. 3-8

Using the Menus............................................................. 3-10

Selecting Images......................................................... 3-12

Background Image and Foreground Image .................... 3-12

Selecting Signals Output to the Auxiliary Bus............... 3-16

Selecting an Effect .......................................................3-17

Types of Effect ............................................................... 3-17

Example Effects ............................................................. 3-18

Selection in Direct Pattern Selection Mode ................... 3-23

Selection in Pattern Number Specification Mode .......... 3-24

Modifying the Boundary — Border, Soft Edge,

Beveled Edge, and Crop.....................................3-26

Changing the Pattern Position and Size —

Location (X)(Y)(Z)................................................3-29

Modifying the Pattern — User Modifiable Effects .....3-31

(Continued)

4Table of Contents

Table of Contents

Chapter 4

Advanced

Operations

Chapter 3

Basic Operation

(Continued)

Inserting Characters and Graphics (1) —Title Key...3-33

Luminance Key .............................................................. 3-33

Chroma Keying .............................................................. 3-36

Masking Part of a Title Key............................................ 3-44

Inserting Characters and Graphics (2) —

Downstream Key................................................ 3-45

Setting Up aTransition ................................................3-51

Setting the Transition Time ............................................ 3-51

Setting the Transition Direction ..................................... 3-52

Executing an Effect ......................................................3-54

Adjusting Color Mattes................................................3-57

Adjusting Image Colors — Color Correction.............3-59

Freezing an Input Image — Frame Memory

Function...............................................................3-61

Fade-to-Black................................................................3-63

Changing Direct Pattern Assignments........................ 4-1

User Program Effects ................................................... 4-3

Constructing a User Program Effect ................................ 4-3

Types of User Program Effect .......................................... 4-4

Modification Parameters .................................................. 4-5

Creating New User Program Effects .............................. 4-10

Editing User Program Effects......................................... 4-12

Executing User Program Effects .................................... 4-18

Deleting All User Program Effects................................. 4-19

Snapshots.....................................................................4-20

Saving a Snapshot .......................................................... 4-21

Recalling a Snapshot ...................................................... 4-22

Snapshot Demonstration ................................................ 4-23

Reinitializing the Snapshots ........................................... 4-24

Table of Contents 5

Chapter 5

Control From

Editing Control

Units

Control From the PVE-500............................................ 5-1

Preparations ...................................................................... 5-2

Cut Editing ....................................................................... 5-2

A/B Roll Editing............................................................... 5-3

Control From the BVE-600............................................ 5-5

Preparations ...................................................................... 5-5

A/B Roll Editing............................................................... 5-6

Control From the BVE-900/2000 Series........................5-8

Preparations ...................................................................... 5-9

Notes on Operation......................................................... 5-10

Control Using GPI Signals ......................................... 5-11

Preparations .................................................................... 5-11

A/B Roll Editing............................................................. 5-12

Turning a Downstream Key On and Off ........................ 5-13

Preread Editing.............................................................5-14

Chapter 6

System

Connections

and Settings

Basic System Connections .......................................... 6-2

Key Signal Connections ................................................6-3

System Connections for Preread Editing ................... 6-4

Connections for an A/B Roll Editing System ..............6-5

Setup Menu Settings......................................................6-7

Setup Menu Organization................................................. 6-7

System Setup (page 1/8)................................................... 6-7

System Information Display (page 2/8) ........................... 6-8

Input Video Setup (page 3/8)............................................ 6-8

Output Video Setup (page 4/8) ......................................... 6-9

Control Panel Setup (page 5/8) ...................................... 6-10

Initializing User Settings (page 6/8)............................... 6-10

Loading User Settings From Memory (page 7/8) .......... 6-10

Saving User Settings in Memory (page 8/8) .................. 6-10

6Table of Contents

Table of Contents

Appendixes

Warning Messages........................................................ A-1

EffectType List .............................................................. A-3

Effect Control Parameter List....................................... A-5

Effect MotionTypes.....................................................A-21

Effect Pattern Variant Forms and Decorations .........A-22

Effect Pattern Image List ............................................A-29

To Exchange the Button Labels................................. A-63

Specifications..............................................................A-64

Glossary.......................................................................A-66

Index.................................................................................I-1

Chapter 1 Overview 1-1

Chapter 1

Overview

Features ofThis System

The Sony DFS-700/700P DME Switcher is a Digital

Multi Effects system, offering high-performance

effects at high image quality. The system consists of a

processor unit and control panel.

Support for fully digital component

systems with SDI inputs and outputs

This system provides SDI interfaces as standard

equipment. This allows it to be incorporated in fully

digital linear editing systems using DVCAM-series,

Betacam SX-series, and other digital VCRs.

Advanced special effects

This system is equipped with advanced special effects,

including trail, lighting effects, ripple, swirl, and

explosion.

Installing the optional BKDF-711 board adds a second

DME channel, and the optional BKDF-712 board

enables 3D mapping effects to be used.

For details of option boards, see page 1-3.

Support for wide range of input/output

signal formats

•There are eight inputs as standard (VIDEO INPUT 1

to 8).

VIDEO INPUT 1 to 4: SDI (serial digital interface)

signals

VIDEO INPUT 5 to 8: analog component signals.

VIDEO INPUT 8 can also be used as an analog

RGB signal input.

Installing the optional BKDF-701 board allows all

eight inputs to be used as either SDI or analog

component inputs.

Installing the optional BKDF-702/702P board allows

four inputs to be used as either Y/C (S-video) or

analog composite inputs.

For details of option boards, see page 1-3.

•The standard outputs are two each of SDI, analog

component, analog composite, and Y/C, for a total of

eight outputs.

Comprehensive title key functions

Luminance keys, chroma keys, and downstream keys

are all provided as standard functions.

Chapter 1 Overview

1-2 Chapter 1 Overview

Color correction function

A YUV color correction function is provided for white

balance adjustment and general color adjustment.

User program effect and snapshot

function

•User program effects: This system has a large

number of built-in effects, but also allows the user to

create original effects, and save them in memory, for

execution in the same way as the built-in effects. Up

to twenty user program effect patterns, both linear

and nonlinear, can be saved.

•Snapshot function: The processor unit includes

snapshot registers 0 to 99, each of which can hold a

snapshot of the control panel settings. These can then

be recalled as required.

Aspect ratio selection

In the setup menu it is possible to select either 4:3 or

16:9 as the screen aspect ratio.

Easy operation for live broadcasting

The following features make this system suitable for

live broadcasting from CATV studios and so on.

•Fully-equipped control panel offers easy operability

for signal selection and transition setting.

•Parallel tally output and preview output supplied as

standard

Interfacing with editors

This system is equipped with I/O interfaces for two

sets of control signals, allowing operation together

with various editing control units.

•Nine-pin interface connector (one input/output):

for A/B roll editing (two players, one recorder)

together with a PVE-500, BVE-2000 series, or other

editing control unit

•GPI (General Purpose Interface) and trigger

signal connectors (two inputs): for control from

external equipment not fitted with the 9-pin interface

This system also supports the background through

mode. If connected to a recorder VCR with a preread

function, A/B roll editing with a minimum of two

VCRs is possible. (In background through mode, the

delay to the signal selected on the background bus of

this system is 4H. Note that there are restrictions on

the effect patterns that can be used for preread editing.)

External synchronizing connectors for

higher editing precision

The system is provided with black burst outputs for

synchronizing other connected devices, and a genlock

input for synchronization to an external signal. This

allows more precise editing.

Rack mounting

The processor unit can be mounted in an EIA standard

19-inch rack.

Features ofThis System

Chapter 1 Overview

Chapter 1 Overview 1-3

Option Boards

The DFS-700/700P system has the following option

boards.

BKDF-701 SDI and Component Input

Board

When this board is installed, it allows all eight video

inputs to be used as either SDI or analog component

inputs. When using this board, you can select the types

of the optional inputs individually, using the setup

menu.

BKDF-702/702P Y/C and Composite Input

Board

When this board is installed, it allows four video

inputs to be used as either Y/C (S-video) or analog

composite inputs. When using this board, you can

select the types of the optional inputs individually,

using the setup menu.

BKDF-711 2nd Channel DME Board

This board provides a second DME channel, enabling

two-picture box, two-picture brick, and other effects.

BKDF-712 3D Video Mapping Effects

Board

This board provides 3D mapping effects, including 3D

page turn, 3D beveled edge, and other effects.

Andere Handbücher für DFS-700

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sony Schalten Handbücher

Sony

Sony XA-C30 - 2 Output Selector Bedienungsanleitung

Sony

Sony MFS-2000-C Bedienungsanleitung

Sony

Sony DVS-7250 Montageanleitung

Sony

Sony 26-483-01 Gebrauchsanweisung

Sony

Sony MVS-3000A Benutzerhandbuch

Sony

Sony DVS-7200A Bedienungsanleitung

Sony

Sony DVS-7000A Bedienungsanleitung

Sony

Sony MCS-8M Bedienungsanleitung

Sony

Sony DVS-7300 Bedienungsanleitung

Sony

Sony DVS-7200 Bedienungsanleitung

Sony

Sony MVS-8000 Bedienungsanleitung

Sony

Sony XVS-G1 Bedienungsanleitung

Sony

Sony MVS-6520 Bedienungsanleitung

Sony

Sony PCGA-PRFX1 Bedienungsanleitung

Sony

Sony XVS-9000-C Bedienungsanleitung

Sony

Sony MVS-6520 Bedienungsanleitung

Sony

Sony XVS Series Kurzanleitung

Sony

Sony DFS-900M Bedienungsanleitung

Sony

Sony BVS-A3232 Bedienungsanleitung

Sony

Sony PC-3000 Bedienungsanleitung

Sony

Sony XVS-9000 Bedienungsanleitung

Sony

Sony XVS-8000-C Bedienungsanleitung

Sony

Sony HDS-7100 Bedienungsanleitung

Sony

Sony XKS-C9111 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung