Sony Trinitron WEGA KV-HG29 Bedienungsanleitung

Tr initron Color TV

KV-HG29

3-218-624-11 (1)

Operating Instructions

•Before operating the unit, please read this manual thoroughly and retain

it for future reference.

M80

110-240 V AC, 50/60 Hz

Indicated on the rear of the TV

B/G, I, D/K, M

PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43

VHF : E2 to E12 /UHF : E21 to E69 /

CATV : S01 to S03, S1 to S41

UHF : B21 to B68 /CATV : S01 to S03, S1 to S41

VHF : C1 to C12, R1 to R12 /

UHF : C13 to C57, R21 to R60 /

CATV : S01 to S03, S1 to S41, Z1 to Z39

VHF : A2 to A13 /UHF : A14 to A79 /

CATV : A-8 to A-2, A to W+4, W+6 to W+84

75-ohm external terminal

6 W + 6 W

Input: 2 Output: 1 Phono jacks; 1 Vp-p, 75 ohms

Input: 3 Output: 1 Phono jacks; 500 mVrms

Input: 1 Phono jacks;

Y: 1 Vp-p, 75 ohms,

sync negative

CB: 0.7 Vp-p, 75 ohms

CR: 0.7 Vp-p, 75 ohms

Output: 1 Stereo minijack

FM Mono

87.5 - 108.0 MHz

10.7 MHz

29 in.

Measured diagonally

801 ×590 ×506

ASpecifications

Design and specifications are subject to change without notice.

Note

KV-HG29M80

Power requirements

Power consumption (W)

Television system

Color system

Channel coverage

B/G

D/K

8 (Antenna)

Audio output (Speaker)

Number of terminal

(Video)

(Audio)

(Component

Video)

i(Headphone)

FM Radio

Tuning Range

Intermediate

Frequency

Picture tube

Tube size (cm)

Screen size (cm)

Dimensions (w/h/d, mm)

Mass (kg)

Clean the TV with a dry and soft

cloth. Do not use benzine, thinner,

or any other chemicals to clean the

TV. Do not attach anything (e.g.,

adhesive tape, cellophane tape,

glue) on the painted cabinet of the

TV. Do not scratch the picture

tube.

BWARNING

• Dangerously high voltages are present inside the TV.

• TV operating voltage: 110 – 240 V AC.

•Do not plug in the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through the antenna

and other terminals to ground.

•To avoid battery leakage and damage to the remote, remove the batteries from the

remote if you are not going to use it for several days. If any liquid leaks from the

batteries and touches your skin, immediately wash it away with water.

Install the TV on a stable TV stand

and floor which can support the

TV set weight. Ensure that the TV

stand surface is flat and its area is

larger than the bottom area of the

TV.

Do not plug in too many

appliances to the same power

socket. Do not damage the power

cord.

For children’s safety, do not leave

children alone with the TV. Do not

allow children to climb onto it.

For your own safety, do not touch

any part of the TV, the power cord

and the antenna cable during

lightning storms.

Do not place any objects on the TV.

The apparatus shall not be

exposed to dripping or splashing

and that no objects filled with

liquids, such as vases, shall be

placed on the apparatus.

Do not operate the TV if any liquid

or solid object falls into it. Have it

checked immediately by qualified

personnel only.

Do not block the ventilation

openings of the TV. Do not install

the TV in a confined space, such

as a bookcase or built-in cabinet.

Do not open the cabinet and the

rear cover of the TV as high

voltages and other hazards are

present inside the TV. Refer

servicing and disposal of the TV

to qualified personnel.

To prevent fire or shock hazard, do

not expose the TV to rain or

moisture.

Your TV is recommended for

home use only. Do not use the TV

in any vehicle or where it may be

subject to excessive dust, heat,

moisture or vibrations.

Pull the power cord out by the

plug. Do not pull the power cord

itself. Even if your TV is turned off,

it is still connected to the AC

power source (mains) as long as

the power cord is plugged in.

Unplug the TV before moving it

or if you are not going to use it for

several days.

CSecuring the TV

To prevent the TV from falling, use the supplied screws, clamps and band to

secure the TV.

20 mm

3.8 mm

screws clamps band

Screw the band to the TV stand and to the

provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps.

(2) Screw one clamp to a wall or pillar and

the other clamp to the provided hole at

the rear of your TV.

(1) Attach each end of a cord or chain to

the provided holders at the rear of your

TV.

(2) Securely fix the attached cord or chain

to a wall or pillar using an attachment

which can support the TV set weight.

• Use only the supplied screws. Use of other screws may damage the TV.

End

Select Confirm

Step 1

Insert the batteries (supplied) into the remote.

• Do not use old or different types of batteries together.

Step 4

Set up the TV by following the instructions of the

“Initial Setup” menu (see

Plug in the power cord, then press 1on the TV to

turn it on.

• The 1(standby) indicator flashes green for a few seconds

when turning on the TV. This does not indicate a malfunction.

Connect the antenna cable (not supplied) to 8

(antenna input) at the rear of the TV.

•

Your TV can receive both TV and FM radio signals from

the appropriate connections through the 8(antenna input)

terminal (see

•You can also connect your TV to other optional

components (see

DGetting Started

Step 2

Step 3

Setting up your TV (“Initial Setup”)

When you turn on your TV for the first time, the “Initial Setup” menu will

appear. You can adjust settings below using the buttons on the remote control

or TV front panel. Press V, v , B or b to select or adjust items, then press .

1Select the desired menu language.

2Select “Yes” to preset the channels automatically.

To skip automatic channel presetting, select “No”.

3The “Program Sorting/Edit” menu enables

you to sort and edit the channels (

see

4Adjust the bars on the top and bottom of the menu

if they are slanted.

5Adjust the upper and lower bars if they are not

equally positioned to the top and bottom of the

screen.

6To prevent this “Initial Setup” menu from appearing

again when you turn on the TV by pressing 1, select

“No”.

To allow this menu to appear again, select “Yes”.

•You can immediately go to the end of the “Initial Setup” menu by pressing WEGA

GATE.

Program Sorting/Edit

001

002

003

004

Off

Sorting: Edit:

PROG

SkipLabel

Exit

Select Confirm

End

Select Confirm

Initial Setup

Language: English

Start Auto Program now?

Yes

First please connect

cable/antenna

Initial Setup

End

Select Confirm

Initial Setup

Display this menu next time?

Yes

End

Select Confirm

Select End

Confirm

(MONO)

FConnecting optional components

You can connect a wide range of optional components to your TV. Connecting

cables are not supplied.

Connecting to the TV (front)

Connecting to the TV (rear)

Camcorder

Audio/Video

cable

• If you connect a VCR to 8(antenna input), preset the signal output from the VCR to the

program number 0 on the TV (

see

•If your DVD player can output interlace and progressive mode signals, select the

interlace output when connecting to (component video input) on your TV. Your TV

can receive either 525i/60Hz or 625i/50Hz interlace signals.

• The component video terminals on your DVD player are sometimes labeled Y/CB/CR,

Y/PB/PR, Y/Cb/Cror Y/B-Y/R-Y.

• If you select “DVD” on your TV screen, the signal from the T(monitor output)

terminals will not be output properly. This does not indicate a malfunction.

Audio

cable

Audio/

Video cable

Component

Video cable

Antenna

cable

VCR

If cannot receive

FM signal

VCRDVD Player

Audio/

Video cable

(MONO)

Headphones

DVD Player

Antenna

cable

signal

Antenna

selector

TV signal

Audio System

TV, CATV, Satellite

GTV buttons and remote control

11Turn off or turn on the TV.

2Wake Up indicator.

21Standby indicator.

3Remote control sensor.

4PROG +/– Select program number.

52+/– Adjust volume.

6tSelect TV or video input.

WEGA GATE menu operations (see I)

4,5

, , ,

Select or adjust items.

6Confirm selected items.

7WEGA GATE Display or cancel WEGA GATE

menu.

8FM Listen to FM Radio (see H).

123

789

PROG

A/B

RETURN

WEGA

GATE

1?/1Turn off temporarily or turn on

the TV.

2aDisplay the TV program.

3Jump to last program number that

has been watched for at least five

seconds.

4PROG +/– Select program number. To select

quickly, press and hold until the

desired program number appears.

52+/– Adjust volume.

8Change the picture size:

“On” (16:9 wide mode), “Off”.

9Select surround mode options

(see

0Display on-screen information.

qa Mute the sound.

qs A/B Not function for your TV.

qd tSelect TV or video input.

qf 0-9 Input numbers. For program

numbers 10 and above, enter the

next digit within two seconds.

23678154

ql Select sound mode options with a 5-Band Graphic Equalizer display:

“Dynamic”, “Standard”, “Custom”* (see

100 300 1k 3k 8k

Dynamic

100 300 1k 3k 8k

Standard

100 300 1k 3k 8k

Custom

* When the “Custom” mode is selected, you can receive the last adjusted

sound settings from the “Sound Adjustment” option in the menu.

w; Select picture mode options: “Vivid”, “Standard”, “Custom”* (see

*When the “Custom” mode is selected, you can receive the last adjusted

picture settings from the “Picture Adjustment” option in the menu.

WEGA GATE menu operations (see

)

6Confirm selected items.

7WEGA GATE Display or cancel WEGA GATE menu.

qj V, v,B ,b Select or adjust items.

qk RETURN Return to the previous level.

Timer operations

qg Set TV to turn on automatically according to the desired period of time

(Wake Up Timer) (max. of 12 hours). The indicator on TV lights up amber once you set

the wake up timer. If no buttons or controls are pressed for more than

three hours after the TV is turned on using the wake up timer, the TV

automatically goes into standby mode.

qh Set TV to turn off automatically according to the desired period of time

(Sleep Timer) (max. of one hour and 30 min.).

Teletext operations (green icon)

, , , ,

Not function for your TV.

, , , ,

(red, green,

yellow, blue)

PIP operations

, , V, v,B, bNot function for your TV.

Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752,

5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

TV buttons and remote control (continued)

HListening to the FM Radio

You are able to listen to the FM radio stations using your TV by connecting an

antenna (see

To access to FM Radio mode:

Press WEGA GATE button and select “FM Radio” (see

Press FM button on the front panel (see

To exit from FM Radio mode:

Press WEGA GATE button, select the desired items: “TV” or “External Inputs”,

then press . Select the desired TV channel or external inputs and press .

Press FM button on the front panel.

A/B

PROG

+/–

V, v,

B,b

WEGA

GATE

123

789

PROG

A/B

WEGA

GATE

RETURN

Listening to preset stations

Access to FM Radio mode.

Press WEGA GATE button and select “Settings”.

Preset the desired FM radio stations in “FM Radio

Setup” from “Channel Setup” menu (see

Exit from “Channel Setup” menu by pressing

WEGA GATE button. The selected preset FM radio

station number and label will appear on the screen.

To select the desired preset FM radio station, press

PROG +/–.

• You can also use the 1-9 buttons on the remote control

to directly select the desired preset FM radio station.

Listening to non-preset stations

Access to FM Radio mode.

Press Bor b to search for the desired FM radio station. The preset number

and label will not be displayed.

•

You can only operate V, v, Band bfunctions using the remote control buttons in FM

Radio mode.

•

The available radio frequency is only for temporary listening pleasure and cannot be

stored in the memory.

•

If the message “Please setup FM Radio” appears, display the “Channel Setup” menu

and select “FM Radio Setup” to preset the desired FM radio stations (see

•

If the station has a noisy sound, you may be able to improve the sound quality by pressing

Bor b.

Inhaltsverzeichnis

Andere Sony Fernseher Handbücher

Sony

Sony KD-55XD80 SERIES Bedienungsanleitung

Sony

Sony Trinitron Wega KV-HW213 Bedienungsanleitung

Sony

Sony Trinitron WEGA KV-SZ292 Bedienungsanleitung

Sony

Sony Trinitron Bedienungsanleitung

Sony

Sony XR-85X95K Bedienungsanleitung

Sony

Sony TRINITRON KV-M19D Bedienungsanleitung

Sony

Sony BRAVIA KD-65X8 J Series Bedienungsanleitung

Sony

Sony KV-25FXR20 Bedienungsanleitung

Sony

Sony Trinitron KV-27S20 Bedienungsanleitung

Sony

Sony KV-14LT1B Bedienungsanleitung

Sony

Sony Trinitron KV-27TS20 Bedienungsanleitung

Sony

Sony BRAVIA KDL-40R350C Bedienungsanleitung

Sony

Sony Bravia XBR-49X805H Bedienungsanleitung

Sony

Sony BRAVIA KDL-19BX200 Bedienungsanleitung

Sony

Sony BA-4D Bedienungsanleitung

Sony

Sony KV-34FQ75A Bedienungsanleitung

Sony

Sony Trinitron KV-H29TF Bedienungsanleitung

Sony

Sony Bravia XR-77A8 K Series Bedienungsanleitung

Sony

Sony KV-20M10 Bedienungsanleitung

Sony

Sony KDL-32BX400 Bedienungsanleitung

Sony

Sony KP-57WV600 - 57"hi-scan 1080i 16:9 Projection... Bedienungsanleitung

Sony

Sony BRAVIA A90K Bedienungsanleitung

Sony

Sony Bravia XR-77A80J Bedienungsanleitung

Sony

Sony TRINITRON KV-XR29M61 Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Philips

Philips Colour Television Bedienungsanleitung

Toshiba

Toshiba 27A10 Bedienungsanleitung

Philips

Philips 42PF9630A/37 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Philips

Philips Matchline 21CE7551 Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Philips

Philips 25PT4523-16 Bedienungsanleitung

Philips

Philips PR0930X3 Bedienungsanleitung

Philips

Philips Brilliance 231P4QPY Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Philips

Philips 32PFH5300 Bedienungsanleitung

Sylvania

Sylvania 6427FB Bedienungsanleitung