Sota Silver Pulser SP7 Bedienungsanleitung

The Silver Pulser

Model SP7 Manual

CONTENTS

WELCOME TO SOTA..................................................................................................... 3

BEFORE USING ............................................................................................................... 3

LEARN MORE ................................................................................................................. 3

COMPLETE UNIT INCLUDES...................................................................................... 3

DO NOT USE.................................................................................................................... 4

MICROPULSING CAUTIONS ...................................................................................... 5

IONIC~COLLOIDAL SILVER CAUTIONS................................................................. 5

GENERAL CAUTION..................................................................................................... 5

SUMMARY OF LIGHTS ................................................................................................. 6

HOW TO USE THE MICROPULSING FUNCTION .................................................. 6

Cotton Sleeves Option ............................................................................................... 7

Sponge Sleeves Option .............................................................................................. 8

How Micropulsing Should Feel ............................................................................. 10

Sensitive Skin ............................................................................................................. 11

Typical Use ................................................................................................................ 11

HOW TO USE THE IONIC~COLLOIDAL SILVER FUNCTION ......................... 12

How to Assemble ...................................................................................................... 12

How to Make Ionic~Colloidal Silver...................................................................... 12

Typical Use................................................................................................................. 14

The Silver Pulser Model SP7 Manual

ELECTRICAL SPECIFICATIONS .............................................................................. 14

Power Requirements................................................................................................. 14

Optional Power Input............................................................................................... 14

Output Specications................................................................................................ 15

TROUBLESHOOTING.................................................................................................. 15

COUNTRIES THAT PARTICIPATE IN MANUFACTURING............................... 15

REPLACEMENT ACCESSORIES................................................................................ 15

WARRANTY................................................................................................................... 15

REPAIRS.......................................................................................................................... 16

The Silver Pulser Model SP7 Manual

WELCOME TO SOTA

Thank you for allowing us to be a part of your Wellness Team.

The Silver Pulser is a consumer product designed to be used as part of a Wellness

Lifestyle. A commitment to healthy lifestyle choices is an important factor in the

journey to Wellness.

The SOTA Silver Pulser has two functions – Micropulsing and making Ionic~Colloidal

Silver. Micropulsing offers gentle microcurrents that work with the body’s natural

electricity for more energy, general health and well-being. Ionic~Colloidal Silver is one

of nature’s gifts and can be made easily and inexpensively at home.

The Silver Pulser is designed to be used independently, but can also be used together

with any of the SOTA Products.

With proper care, your Silver Pulser should provide you many years of trouble-free

use.

Please understand that results will vary.

BEFORE USING

Please read the manual thoroughly before using your Silver Pulser. For the most up-to-

date manual, please visit our website www.sota.com/manuals.

We’ve made every effort to ensure the information in your manual is up-to-date at

the time of printing ... since that time however, new information may have become

available.

LEARN MORE

To learn more about the Silver Pulser we invite

you to visit the SOTA website:

www.sota.com

The website offers How to Videos, Frequently

Asked Questions, The SOTA Products User Guide,

SOTA News ... and more.

COMPLETE UNIT INCLUDES

• One (1) Silver Pulser Unit

• One (1) 9-Volt Alkaline Battery

The Silver Pulser Model SP7 Manual

• One (1) Carrying Case or Packaging Box

• One (1) Product Manual

FOR MICROPULSING APPLICATION:

• One (1) Micropulsing Cord for Rubber Probes

• Two (2) Pair Conductive Rubber Probes

• One (1) Arm Band and Clip

• One (1) Dark Glass Dropper Bottle

COTTON SLEEVES OPTION:

• Six (6) Pair Cotton Sleeves with Velcro®

• One (1) Neoprene®Velcro®Wrist Strap

SPONGE SLEEVES OPTION:

• Six (6) Pair Sponge Sleeves with Velcro®

• One (1) Velcro®Wrist Strap

FOR MAKING IONIC~COLLOIDAL SILVER:

• One (1) Silver Wire Holder

• Two (2) Silver Wires of .9999 (4 Nine) Purity

• One (1) Green Scrub Pad

DO NOT USE

1.Do not use in the following situations as safety has not been explored using the

Micropulsing function:

a. In the case of pregnancy.

b. With an active implanted device such as a pacemaker, etc.

2.As with all electrical products do not use near water, when driving a car or when

operating heavy equipment.

3.Do not connect the Micropulsing Cord or the Silver Wire Holder to any other USB

outlet, such as a computer or power supply. Do not plug any other USB connections

into the Silver Pulser, other than the Micropulsing Cord and the Silver Wire Holder.

The Silver Pulser Model SP7 Manual

MICROPULSING CAUTIONS

1.Do not place the Conductive Rubber Probes over skin lesions, abrasions, new scars,

cuts, eruptions or sunburn.

2.Discontinue use if the Micropulsing suddenly feels different or prickly and the

YELLOW light stops ashing. Turn the unit OFF and contact SOTA.

3.Caution is advised if using potentially harmful substances such as recreational and

prescription drugs, as it is not known if microcurrents will interact or if individual

reactions may occur.

4.Caution is required in the following situations as a burn may occur, which could

scar:

a. Do not apply the bare metal pins to the skin.

b. Do not allow the Cotton or Sponge Sleeves to dry out while Micropulsing.

c. Do not Micropulse while sleeping, as the Cotton or Sponge Sleeves may dry out.

IONIC~COLLOIDAL SILVER CAUTIONS

We recommend taking occasional breaks from consuming Ionic~Colloidal Silver for

the following reason:

A handful of people have experienced argyria after drinking large amounts of

Ionic~Colloidal Silver daily, over a long period of time. Argyria is a bluish tinge of

the skin. This occurs when excess silver is eliminated through the skin and exposed

to light. Darkening of the moons of the ngernails is usually an early sign.

The risk of argyria is considered greater for those who are ingesting incorrectly made

Ionic~Colloidal Silver and to a lesser degree, those who are decient in selenium or

vitamin E.

When making and drinking Ionic~Colloidal Silver as currently recommended by

SOTA, the risk of argyria is extremely rare.

GENERAL CAUTION

While this technology is generally considered safe, there exists potential for rare

individual reactions that cannot reasonably be foreseen. Therefore, your use of the

SOTA Products constitutes your agreement that you are responsible for your decision

to use the technology and that you hold SOTA harmless for any injuries or damage

believed to arise from using the SOTA Products.

The Silver Pulser Model SP7 Manual

SUMMARY OF LIGHTS

GREEN: Indicates the unit is on.

RED: Indicates the battery is low and will soon need replacing.

YELLOW: Indicates the Micropulsing function is in operation.

ORANGE: Indicates the Ionic~Colloidal Silver function is in operation.

HOW TO USE THE MICROPULSING FUNCTION

1.Place the 9-Volt Alkaline battery in the unit.

a. On the back of the unit, slide off the

battery cover.

b. Position the 9-Volt Alkaline battery so

the positive (+) and negative (-) terminals

line up as in image 1 or image 2. Your

unit will either have a small circle & large

circle embedded in the plastic case as in

image 1 OR the label inside the case will

be shaped like a battery and show you

the terminals as in image 2.

c. Slide the 9-Volt Alkaline battery into the

case and push down. Slide the cover back

onto the unit.

2.Attach the Conductive Rubber Probes to the

Micropulsing Cord by gently sliding the

Rubber Probes over the metal pins on the

Micropulsing Cord, as in image 3.

Note: Except to occasionally clean them, the

Rubber Probes can stay on the Micropulsing

Cord between uses.

3. Clean the wrist area to remove oils from the

skin. This will allow for better conductivity.

4. Slide the Arm Band up the arm to a

comfortable position. Tighten the band to secure

it in place as in image 4.

The Silver Pulser Model SP7 Manual

Options:

a. If preferred the unit can be placed in a pocket. A

longer Micropulsing Cord is needed for this option.

b. If the Arm Band is too large, a shorter Arm Band is

available.

5. Insert the

Micropulsing Cord into

the jack on the unit as

shown in image 5. The

USB symbol on the

plug should be facing

up. When the plug

is positioned correctly, it will slide in gently. Do not

force.

COTTON SLEEVES OPTION

6. Slide the clip on the back of the Silver Pulser into

the holding clip on the Arm Band as in image 6.

7.Put the Wrist Strap on with the Velcro®side of the

Wrist Strap face-out rather than towards the skin.

8.Prepare one pair of Cotton Sleeves. Each Cotton Sleeve

is sewn on three sides; to nd the open end of the

Cotton Sleeve, squeeze the long sides of the sleeve and

the unsewn end will pop open.

9.Attach one Cotton Sleeve to the Wrist Strap in line

with the pulse point on the thumb side of the wrist.

The open end of the Cotton Sleeve will point down

toward the elbow. Press the sleeve to the Wrist Strap

to rmly adhere the sleeve in place.

10.Place the other Cotton Sleeve, again with the open

side towards the elbow, in line with the pulse point

on the little nger side of the wrist. This pulse point is usually harder to feel. It is

located in the soft hollow on the wrist, in line with the little nger. Press the sleeve

to the Wrist Strap to rmly adhere the sleeve in place. See image 7.

The Silver Pulser Model SP7 Manual

Once in place, the Velcro®will hold the Cotton

Sleeves in the right position for repeated use.

11.Take the Wrist Strap off.

12.Insert one probe from the Micropulsing Cord into

the open end of each Cotton Sleeve. Use a gentle

twisting motion to work the Rubber Probes into the

Cotton Sleeves.

13.Wet the Cotton Sleeves with water.

14.Put the Wrist Strap on so the damp Cotton Sleeves

are against the skin over the pulse points. See image

9 on page 9.

SPONGE SLEEVES OPTION

6.Lay the Wrist Strap on a at surface. The soft ‘loop’

side of the Velcro®should be facing up.

7.Prepare one pair of Sponge Sleeves by moistening them with water. Squeeze out the

excess water.

8.Insert one Rubber Probe from the Micropulsing Cord into each moistened Sponge

Sleeve. Do not insert Rubber Probes into dry Sponge Sleeves. Insert the Rubber

Probe just far enough so it is hidden inside the Sponge Sleeve.

9.Place the two Sponge Sleeves on the Wrist Strap as shown in Image 8, approximately

one nger-width apart.

10. Place your wrists on top of the Sponge

Sleeves.

11. Hold the Sponge Sleeves in place with your

wrist while wrapping the Wrist Strap around

the wrist securing the Velcro® in place. The

Wrist Strap should be snug enough to hold the

Sponge Sleeves in place, but not so tight that it is

uncomfortable.

12.Adjust the Sponge Sleeves so they are aligned properly. One Sponge Sleeve should

be in line with the pulse point on the thumb side of the wrist. The other should be

in line with the pulse point on the little nger side of the wrist. This pulse point is

The Silver Pulser Model SP7 Manual

usually harder to feel. It is located in the soft hollow

of the wrist, in line with the little nger as shown in

Image 9.

13.If the Wrist Strap is too long it can be cut to size.

Measure the excess and using scissors cut the strap at

the end that does not have the rough ‘hook’ Velcro®.

14.Slide the clip on the back of the Silver Pulser into the

holding clip on the Arm Band as in Image 6 on page 7.

15.Turn the unit ON by rotating the ON/OFF switch

clockwise. Turn the switch slowly until you feel the

current. If you do not feel the current, see ‘Notes’ on

page 10.

a. The green light indicates the unit is ON. If the light

does not come on, the battery may not be placed

correctly.

b. The ashing yellow light should come on and get

brighter as the intensity is turned up. If the ashing

yellow light does not come on, the

electrical path has not been established. See

‘Troubleshooting’ on page 15.

16. When nished, turn the unit OFF by

rotating the ON/OFF switch counter

clockwise until it clicks. Do not force the

ON/OFF switch past its natural stopping

point.

17. Unplug the Micropulsing Cord. Do not

store the unit with the Micropulsing Cord

plugged in as this can damage the Cord.

18. Clean the wrist and apply a healing

lotion to avoid irritation.

The Silver Pulser Model SP7 Manual

Notes:

Suggestions for Feeling the Current: If the current is not felt with wet Cotton or wet

Sponge Sleeves, prepare a mild salt solution to wet the sleeves. Add a few grains of

salt to the water in the dropper bottle.

Drink enough water to keep the body well hydrated. Hydration can affect the ability

to feel the current.

Care of Micropulsing Cord and Rubber Probes: Remove the Rubber Probes

occasionally to clean in a mild soap solution. Rinse thoroughly. If necessary, gently

wipe the metal pins of the Micropulsing Cord.

Care of Cotton and Sponge Sleeves: Wash or rinse sleeves occasionally. Periodically

discard and replace Cotton or Sponge Sleeves.

Alternatives to Cotton and Sponge Sleeves:

a. All Cotton Sleeves: SOTA offers Cotton Sleeves without Velcro®.

b. Unbleached Paper Towel: Cut a small square of paper towel large enough to wrap

around the Rubber Probe 2 or 3 times.

c. Cotton Flannel: Cut a small square of cotton annel and wrap around the Rubber

Probe. Secure it in place with thread.

Rubber Probes: Over time, the Rubber Probes will lose their conductivity and need

replacing. Refer to the SP7 Troubleshooting Guide for instructions on how to test the

Rubber Probes.

Low Battery Warning: The RED light comes on and the unit will beep when the

battery is low. This means the battery will soon need to be replaced. The battery can

continue to be used until the YELLOW light goes off.

Power Supply: When Micropulsing, as a safety feature, the unit can only be powered

by a 9-Volt battery.

Replacement Batteries: When purchasing replacement 9-Volt batteries, take the

Silver Pulser with you to ensure a proper t, as 9-Volt batteries vary in size.

HOW MICROPULSING SHOULD FEEL

1. The sensation is a gentle pulsing. While the microcurrents should be felt, it is not

necessary to turn the intensity control up to an uncomfortable level.

2. With repeated use, the ability to feel the microcurrents may change. It may be

Inhaltsverzeichnis

Andere Sota Körperpflegeprodukt Handbücher

Sota

Sota MP5 Bedienungsanleitung

Sota

Sota MP6 Bedienungsanleitung

Sota

Sota Bio Tuner BT9 Bedienungsanleitung

Sota

Sota BT5PRO Bedienungsanleitung

Sota

Sota MP5 Bedienungsanleitung

Sota

Sota Silver Pulser SP6 Bedienungsanleitung

Sota

Sota Silver Pulser ZBB3 Bedienungsanleitung

Sota

Sota Bio Tuner BT9 Bedienungsanleitung

Sota

Sota HPLW2 Bedienungsanleitung

Sota

Sota HPLW1 Bedienungsanleitung

Sota

Sota MP5 Bedienungsanleitung

Sota

Sota ZBB2 Bedienungsanleitung

Sota

Sota LW1 Bedienungsanleitung

Sota

Sota The Bio Tuner Lite Bedienungsanleitung

Sota

Sota MPG1 Bedienungsanleitung

Sota

Sota SP Lite SPL1 Bedienungsanleitung

Sota

Sota Bio Tuner BT9 Bedienungsanleitung

Sota

Sota LightWorks LW1 Bedienungsanleitung

Beliebte Körperpflegeprodukt Handbücher anderer Marken

Pretika

Pretika ST102 Bedienungsanleitung

Beurer

Beurer FC 76 Bedienungsanleitung

Pebble Grey

Pebble Grey 500.40.70-75 Bedienungsanleitung

PUSH

PUSH ortho Bedienungsanleitung

Dermlite

Dermlite DL3N Bedienungsanleitung

DERMAPEN

DERMAPEN SEMI Bedienungsanleitung

HiB

HiB Spectre 50 Bedienungsanleitung

Carex

Carex SunLite Bedienungsanleitung

Roper Rhodes

Roper Rhodes Intense Stücklistenhandbuch

Interacoustics

Interacoustics Titan IMP440 Bedienungs- und Sicherheitshinweise

ReTrak

ReTrak VS001 Bedienungsanleitung

LED Technologies

LED Technologies dpl PAIN RELIEF Joint Wrap Bedienungsanleitung

Casa Lusso

Casa Lusso MVL1000x450PR Bedienungsanleitung

Quoizel

Quoizel QR3326 Montageanleitung

BERTSCHAT

BERTSCHAT HEATED HOODIE PRO - DUAL HEATING Bedienungsanleitung

Beurer

Beurer EM 37 Bedienungsanleitung

ACP

ACP OMNISTAND Bedienungsanleitung

Scarlett

Scarlett VitaSpa SC-CA304PS11 Bedienungsanleitung