You must pair your headset with your mobile phone before it will work.
Consult your phone manual for pairing instructions for your specific
phone model. In general, here's how: 1) Turn OFF the headset if it is on.
Turn ON the phone and navigate to “Bluetooth Link”. 2) Press and hold
down the Main Button on the Sound ID 200 for eight seconds until the
light flashes red and green. Note: the Sound ID 200 is automatically
placed in pairing mode with the LED flashing red and green each time it
is powered on until successfully paired. 3) Select LOOK FOR DEVICES
on the mobile phone, and then select “Sound ID 200” when it appears on
the menu screen. 4) If asked to pair, select YES. 5) If asked for a pin,
passcode, or passkey, enter “0000”. 6) After successfully pairing, the
Sound ID 200 status light will stop flashing and the device will remain ON.
Having Difficulty Pairing?
Step 1: Clear the Phone
Delete any old pairings from the phone(this can sometimes be hard to
find in the menus). Turn the phone off. Remove the battery from the
phone. Wait 20 seconds then re-assemble the phone and turn it on.
Step 2: Clear the Earpiece
Put the earpiece in pairing mode. Hold both buttons until two beeps are
heard (2-4 seconds). Note: you must hold the earpiece up to your ear
while you hold the buttons down so you can hear the beeps. Turn the
earpiece off.
Step 3: Repeat the Pairing Process
Pair Your Sound ID 200 with Your Bluetooth®Mobile Phone
3
