Sound Projections OPT-100 Bedienungsanleitung
User Guide
For OPT-100 CD/MP3-USB Player
560-22 Rev A opt-100, 07/07
www.soundprojections.com
T
EJECT
POWER/VOL
SKIPSTOP
USB FOLDER SKIPCD IR
PLAY
PAU SE
USB Playback (MP3 songs recorded to USB key)
1. Insert a USB memory key into the unit.
2. Press the
USB
button .
• To start play from a folder, press the
FOLDER SKIP
buttons until the folder
you want appears. During playback, use the
FOLDER SKIP UP
and
FOLDER
SKIP DOWN
buttons to move to other folders.
• Press the
PLAY
/
PAUSE
button to play the first song of the album/folder.
!! Note: Be sure to turn the CD/MP3 player off before removing the USB key.
Play Mode (note: accessible only by play MODE BUTTON on remote control)
Press
PLAY MODE
key one or more times to select one of the following modes:
Play all random, Repeat track, Repeat all, Random repeat, and Play all.
Program Play (note: programming feature requires the remote control)
To program songs/tracks on CD
1. Insert CD. Press
PROG
key on remote control to enter program mode.
2. Enter desired song using keys 0 - 9, followed by the
PROG
key. Repeat
until all songs are programmed (display will return to normal after approxi-
mately 10 seconds).
3. To play programmed songs, press
PROG
followed by
PLAY
.
(note: to play songs in normal sequence, press
PLAY
only.)
4. To clear programmed songs, press
PROG
followed by
STOP
.
To program MP3 songs/tracks recorded to CD or USB key
1. Insert CD with MP3 songs or USB key with MP3 songs.
2. Press
PROG
key on remote and enter desired folder using keys 0 - 9,
press
PROG
again and enter desired track. Repeat until all songs are
programmed, press
PROG
key when complete (display will return to normal
after approximately 10 seconds).
3. To play programmed songs, press
PROG
followed by
PLAY
.
(note: to play songs in normal sequence, press
PLAY
only.)
4. To clear programmed songs, press
PROG
followed by
STOP
.
5. To view folder description, press
DISPLAY
key on remote.
USB
Built-in CD/MP3 Player with USB
This addendum is for Sound Systems with optional built-in CD/MP3 player (opt-100).
If your CD player does not look like the image below, contact Sound Projections for
the correct instructions for your player.
Operating the CD Player
1. Turn the sound system’s main power “on.”
2. Push the
POWER
/
VOL
button on the CD player to activate it (the LCD panel
will light).
3. Gently push a CD into slot until auto-load mechanism responds
Note: Do not force CD into player, as damage may result.
CD Playback
1. Press the
PLAY
/
PAUSE
button .
2. Adjust the volume control knob on the CD player.
• To pause, press the
PLAY
/
PAUSE
button; press again to resume play.
• To skip forward during play or program mode press
SKIP
, or press
SKIP
to skip back to the previous song.
If song is playing, press and hold
SKIP
buttons for fast cue (search).
• To stop, press the
STOP
button.
• Press the
EJECT
button to remove the CD.
MP3 Playback (MP3 songs recorded to CD)
•To start play from a folder, press the
FOLDER SKIP
buttons until the folder
you want appears. During playback, use the
FOLDER SKIP UP
and
FOLDER
SKIP DOWN
buttons to move to other folders.
• Press the
PLAY
/
PAUSE
button to play the first song of the folder.
T
EJECT
POWER/VOL
SKIPSTOP
USB FOLDER SKIPCD IR
PLAY
PAUSE
2 3
Inhaltsverzeichnis
Andere Sound Projections Stereoanlage Handbücher
